Įvadas
Ačiū, kad pirkoteasing the ORICO 6629US3 USB3.0 Dual Bay HDD/SSD Docking Station. This device is designed to provide convenient data transfer and offline cloning capabilities for 2.5-inch and 3.5-inch SATA hard drives and solid-state drives. Please read this manual carefully to ensure proper installation and operation.
Produkto savybės
- Didelės spartos perdavimas: Features a high-speed USB 3.0 port, achieving a maximum transfer speed of 5Gbps. UASP support further enhances transfer speeds. Backward compatible with USB 2.0 / 1.0.
- Klonavimo funkcija: Supports two 2.5-inch or 3.5-inch SATA hard drives, with a total capacity of up to 20TB (10TB per slot). Includes an offline HDD/SSD cloning function, allowing direct drive duplication without a computer.
- Lengva naudoti: Driver-free and supports hot-swap. Progress indicator lights clearly show the device's operational status during cloning.
- Platus suderinamumas: Vertical insertion design, tool-free installation, and excellent heat dissipation. Supports Mac, Windows, and Linux operating systems.
Pakuotės turinys
- 1x ORICO USB3.0 HDD Docking Station
- 1x 12V3A Power Adapter (PSE certified)
- 1x USB3.0 Cable (100cm)
- 1x vartotojo vadovas
- 1x aptarnavimo kortelė
Specifikacijos
| Produkto pavadinimas | ORICO HDD Docking Station with Clone Function |
| Modelio numeris | 6629US3 |
| Palaikomi diskai | 2.5/3.5-inch SATA HDD/SSD |
| Maksimali talpa | Up to 10TB per slot, 20TB total |
| Funkcijos | Offline clone, Data transfer |
| Įvesties sąsaja | USB 3.0 tipo B |
| Medžiaga | ABS plastikas |
| Spalva | Juoda |
| Maitinimo adapteris | 12V3A (PSE certified) |
| Kabelio ilgis | USB 3.0 A-B (100cm) |
| Prekės svoris | 260 gramų |
| Suderinama OS | „Mac“, „Windows“, „Linux“ |
Sąranka
- Išpakuokite įrenginį: Atsargiai išimkite visus komponentus iš pakuotės.
- Prijunkite maitinimą: Connect the provided 12V3A power adapter to the docking station's power input port and then to a power outlet.
- Įdėkite diskus:
Image: The ORICO 6629US3 docking station with a 3.5-inch HDD and a 2.5-inch SSD inserted into its two vertical slots.
Insert your 2.5-inch or 3.5-inch SATA HDD/SSD vertically into the designated slots (HDD1 and HDD2). Ensure the drives are firmly seated. The device supports tool-free installation. - Connect to PC (for data transfer):
Image: The ORICO 6629US3 docking station connected to a laptop via a USB 3.0 cable, demonstrating its use for data access.
If you intend to use the docking station for data transfer to/from a computer, connect the USB 3.0 cable from the docking station to an available USB 3.0 port on your computer. - Maitinimas: Press the power button on the docking station. The power LED should illuminate blue.
Naudojimo instrukcijos
A. Data Transfer Mode (PC Connection)
- Ensure the 'PC/CLONE' switch on the back of the device is set to 'PC'.
- Connect the docking station to your computer using the USB 3.0 cable.
- Insert your 2.5-inch or 3.5-inch SATA HDD/SSD into the slots.
- Power on the docking station. Your computer should detect the drives automatically (driver-free).
- You can now access the drives as external storage devices on your computer.
B. Offline Clone Function
The offline clone function allows you to duplicate a hard drive without connecting to a computer. This is useful for creating backups or upgrading drives.
Important Notes for Cloning:
- Šaltinio diskas: The original HDD/SSD to be copied. Insert into the 'Source' slot.
- Tikslinis diskas: The destination HDD/SSD for the copy. Insert into the 'Target' slot.
- The target disk's capacity must be lygus arba didesnis nei the source disk's capacity. Cloning will not start otherwise.
- Cloning will overwrite all data on the target disk. Please back up any important data from the target disk before proceeding.
- Incorrect insertion of Source and Target disks can lead to data loss on your original drive. Always confirm disk positions before starting.
- The time required for cloning depends on the total capacity of the source hard disk, not the size of the data stored on it.
- Atjungti nuo kompiuterio: Ensure the docking station is disconnected from your computer.
- Įdėkite diskus: Insert the source disk into the 'Source' slot (HDD1) and the target disk into the 'Target' slot (HDD2). Ensure they are firmly seated.
Image: The ORICO 6629US3 docking station showing the 'Source' and 'Target' slots for offline cloning, with drives inserted.
- Prijunkite maitinimą: Connect the power adapter and press the power button. The device will beep twice and begin a self-test.
- Set Clone Mode: Push the 'PC/CLONE' switch on the back of the product to the 'CLONE' position.
- Pradėti klonavimą: Press the 'Start' button on the product. Cloning will begin.
- Stebėti pažangą: The LED indicators (25%, 50%, 75%, 100%) will show the cloning progress. All LEDs will illuminate when cloning is complete.
Image: A close-up of the ORICO 6629US3 docking station highlighting the LED progress indicators (25%, 50%, 75%, 100%) during an offline cloning operation.
- Užbaigimas: Once all LEDs are lit, the cloning process is finished. You can now safely remove the drives.
Priežiūra
- Valymas: Įkrovimo stotelės išorę valykite minkštu, sausu skudurėliu. Nenaudokite skystų valiklių ar aerozolių.
- Saugykla: Laikykite prietaisą vėsioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
- Šilumos išsklaidymas: The vertical design aids in heat dissipation. Ensure the device is placed in a well-ventilated area to prevent overheating, especially during prolonged use or cloning operations.
Image: The ORICO 6629US3 docking station illustrating its vertical design and airflow for efficient heat dissipation.
- Maitinimas: Always use the original 12V3A power adapter provided with the device to ensure stable operation.
Image: The ORICO 6629US3 docking station with its 12V power adapter connected, emphasizing stable power delivery.
Trikčių šalinimas
- Drive Not Detected by PC:
- Ensure the USB cable is securely connected to both the docking station and the computer.
- Verify the 'PC/CLONE' switch is set to 'PC' mode.
- Check if the drive is properly seated in the slot. If only one HDD LED lights up, the unlit HDD has a connection issue. Reinsert the drive.
- Pabandykite prijungti prie kito kompiuterio USB prievado.
- For new drives, they may need to be initialized and formatted in Disk Management (Windows) or Disk Utility (Mac) before they appear.
- Offline Clone Fails to Start:
- Ensure the docking station is disconnected from any computer.
- Verify the 'PC/CLONE' switch is set to 'CLONE' mode.
- Įsitikinkite, kad paskirties disko talpa yra lygi arba didesnė už šaltinio disko talpą.
- Check that the source and target drives are inserted into the correct slots ('Source' and 'Target').
- Įsitikinkite, kad abu diskai tinkamai įdėti.
- Mažas perdavimo greitis:
- Ensure you are using a USB 3.0 port on your computer and the provided USB 3.0 cable.
- Verify that your operating system supports UASP for optimal performance.
- Prietaiso perkaitimas:
- Užtikrinkite tinkamą vėdinimą aplink įkrovimo stotelę.
- Avoid placing the device in enclosed spaces.
Garantija ir palaikymas
ORICO provides an 18 mėnesių garantija for this product from the date of purchase. Additionally, ORICO offers visą gyvenimą trunkanti techninė pagalba savo produktams.
If you encounter any issues or have questions regarding the product, please contact ORICO customer support through your retailer or the official ORICO website. Please have your purchase receipt and product model number (6629US3) ready when contacting support.