GAMEMAX Expedition MATX PC Gaming Case User Manual

1. Įvadas

The GAMEMAX Expedition is a compact micro-ATX PC gaming case designed for efficient cooling and component compatibility. It features a streamlined front panel, a full side window for visibility, and an optimized internal layout to support various cooling configurations, including water cooling. This manual provides instructions for the proper installation, operation, and maintenance of your PC case.

1.1 pav.: Priekinė pusė view of the GAMEMAX Expedition MATX PC Gaming Case.

2. Pakuotės turinys

Prieš pradėdami diegti, patikrinkite, ar yra visi komponentai:

• GAMEMAX Expedition MATX PC Gaming Case
• 1 x 120mm Red LED Fan (pre-installed in rear)
• Accessory Kit (screws, standoffs, cable ties)
• Vartotojo vadovas (šis dokumentas)

3. Komponentas baigtasview

Familiarize yourself with the key features and components of your GAMEMAX Expedition case.

Figure 3.1: Top panel with I/O ports. Includes 1x USB 3.0, 2x USB 2.0, and HD Audio ports.

3.2 pav. Vidus view of the main chamber, showing motherboard tray and fan mounts.

3.3 pav. Vidus view behind the motherboard tray, illustrating cable management routes and drive mounting locations.

4. Diegimo vadovas

Follow these steps to install your PC components into the GAMEMAX Expedition case.

4.1. Bylos rengimas

1. Padėkite dėklą ant stabilaus, lygaus paviršiaus.
2. Remove the side panels by unscrewing the thumbscrews at the rear of the case and sliding the panels off.

4.2. Pagrindinės plokštės montavimas

1. Įdėkite prie pagrindinės plokštės pridedamą įvesties / išvesties skydą į angą korpuso gale.
2. Align your Micro-ATX motherboard with the pre-installed standoffs. Ensure all screw holes on the motherboard align with the standoffs.
3. Pritvirtinkite pagrindinę plokštę naudodami atitinkamus varžtus iš priedų rinkinio.

4.3. Maitinimo šaltinio (PSU) įrengimas

1. Position your ATX power supply unit in the dedicated compartment at the bottom rear of the case.
2. Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards, depending on your cooling preference.
3. Secure the PSU to the case using the screws provided with your power supply.

4.4. Atminties disko diegimas

The case supports 2.5-inch SSDs and 3.5-inch HDDs.

Figure 4.1: Drive bay locations for 2.5" and 3.5" storage devices.

1. 3.5 colio standiesiems diskams: Slide the HDD into the drive cages located in the PSU shroud area. Secure with screws if necessary.
2. 2.5 colio SSD diskams: Mount the SSDs onto the designated brackets behind the motherboard tray or on top of the PSU shroud. Secure with screws.

4.5. Išplėtimo plokštės (GPU) diegimas

1. Nuimkite reikiamus išplėtimo lizdų dangtelius nuo korpuso galo.
2. Insert your graphics card or other expansion card into the appropriate PCIe slot on your motherboard.
3. Secure the card with the retention clip or screw. The case includes a GPU bracket for additional support, preventing sag for larger cards.

4.6. Ventiliatoriaus ir aušinimo sistemos montavimas

The case comes with one 120mm Red LED fan pre-installed at the rear. Additional fans can be installed for enhanced airflow.

Figure 4.2: Fan mounting locations (top and rear).

• Priekyje: Palaiko 2 x 120 mm ventiliatorius.
• Į viršų: Palaiko 2 x 120 mm ventiliatorius.
• Galinis: Supports 1 x 120mm fan (one pre-installed).

For water cooling, the case supports radiators up to 240mm at the front.

4.7. Front Panel Connector Installation

Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power LED, HDD LED, Power Switch, Reset Switch) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact header locations.

5. Operacija

Once all components are installed and connected, replace the side panels. Connect your peripherals and power cable, then press the power button on the top panel to start your system.

The case's design promotes optimal airflow. Ensure no obstructions block the intake and exhaust vents to maintain efficient cooling.

6. Priežiūra

Reguliarus techninis aptarnavimas padeda užtikrinti optimalų kompiuterio komponentų veikimą ir ilgaamžiškumą.

6.1. Dulkių filtro valymas

The GAMEMAX Expedition includes a magnetic dust filter on the top panel to prevent dust accumulation inside the case.

Figure 6.1: Magnetic dust filter for easy removal and cleaning.

1. Gently lift the magnetic dust filter from the top of the case.
2. Išvalykite filtrą suslėgtu oru arba nuplaukite vandeniu. Prieš vėl įdėdami, įsitikinkite, kad jis visiškai sausas.
3. Regularly check and clean the dust filter, especially in dusty environments, to maintain good airflow.

6.2. Bendras valymas

• Išorinius korpuso paviršius nuvalykite minkštu, sausu skudurėliu.
• For the acrylic side panel, use a microfiber cloth and a mild, non-abrasive cleaner to avoid scratches.
• Reguliariai naudokite suslėgtą orą, kad nuvalytumėte dulkes nuo vidinių komponentų ir ventiliatoriaus menčių.

7. Problemų sprendimas

Jei kyla problemų dėl kompiuterio surinkimo, atlikite šiuos įprastus trikčių šalinimo veiksmus:

• Sistema neįsijungia: Double-check all power connections, including the 24-pin ATX, 8-pin CPU, and GPU power cables. Ensure front panel power switch cables are correctly connected to the motherboard.
• Nėra ekrano išvesties: Verify that your graphics card is fully seated in its PCIe slot and that the monitor cable is securely connected to the graphics card (not the motherboard, unless using integrated graphics).
• Perkaitimas: Ensure all case fans are spinning and oriented correctly for optimal airflow (intake at front/bottom, exhaust at rear/top). Clean dust filters and internal components regularly.
• Ventiliatoriaus triukšmas: Check if fan cables are clear of fan blades. Ensure fans are securely mounted. Excessive noise might indicate a faulty fan or dust buildup.
• Laisvi komponentai: If you hear rattling, check that all installed components (motherboard, GPU, drives) are securely fastened with screws.

8. Specifikacijos

Detailed technical specifications for the GAMEMAX Expedition MATX PC Gaming Case.

Figure 8.1: Case dimensions (Height: 14.82", Depth: 13.65", Width: 7.33").