Įvadas
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your PEDROLLO JSWm/2CX self-priming water pump. Please read these instructions carefully before installation or use and retain them for future reference.
1 paveikslas: PEDROLLO JSWm/2CX Self-Priming Water Pump. This image shows the blue-colored pump unit with its motor housing and pump body, designed for efficient water transfer.
Saugos informacija
Always observe the following safety precautions to prevent injury or damage to the pump:
- Ensure the pump is installed by a qualified professional.
- Prieš atlikdami bet kokią techninę priežiūrą ar remontą, atjunkite maitinimą.
- Nenaudokite siurblio su degiais arba ėsdinančiais skysčiais.
- Saugokite siurblį nuo užšalimo temperatūros.
- Užtikrinkite tinkamą elektros jungties įžeminimą.
Produktas baigtasview
The PEDROLLO JSWm/2CX is a self-priming centrifugal pump designed for reliable water transfer. It is suitable for pumping clean water and liquids that are not chemically aggressive to the pump's components. Its self-priming capability allows it to draw water even when air is present in the suction line, making it ideal for domestic water supply, small to medium autoclave tank systems, and garden irrigation.
Pagrindinės funkcijos:
- Self-priming design for efficient operation.
- Suitable for clean water and non-aggressive liquids.
- Robust construction with stainless steel components.
- Designed for continuous duty in domestic and garden applications.
Sąranka ir diegimas
Proper installation is crucial for the pump's performance and longevity. Consult a qualified technician for installation.
- Vieta: Install the pump in a dry, well-ventilated area, protected from direct sunlight and freezing temperatures. Ensure adequate space for maintenance.
- Montavimas: Securely fasten the pump to a stable, level surface using appropriate bolts to minimize vibration.
- Vamzdynas:
- Use pipes of adequate diameter to minimize friction losses.
- Ensure all connections are airtight, especially on the suction side, to prevent air ingress.
- Siurbimo vamzdžio gale sumontuokite kojinį vožtuvą su filtru, kad į siurblį nepatektų šiukšlių ir būtų palaikomas užpildymas.
- Install a gate valve on both the suction and discharge sides for isolation during maintenance.
- Elektros jungtis:
- Connect the pump to a suitable power supply (220-230V, 50Hz) as indicated on the motor's data plate.
- Ensure the electrical circuit is protected by a residual current device (RCD) and an appropriately rated circuit breaker.
- Verify proper grounding according to local electrical codes.
- Gruntavimas: Prieš pirmąjį paleidimą visiškai pripildykite siurblį casing and the suction line with clean water through the priming port. This is essential for self-priming pumps to initiate operation.
Naudojimo instrukcijos
- Pradinis paleidimas: After installation and priming, open the discharge valve fully. Switch on the power supply. The pump should start and begin to draw water.
- Nepertraukiamas veikimas: Monitor the pump for unusual noises or vibrations. Ensure the pump is not running dry, as this can cause severe damage.
- Išjungti: To stop the pump, switch off the power supply. If the pump is part of an automatic system (e.g., with a pressure switch), it will start and stop automatically based on demand.
- Temperatūros ribos:
- Liquid temperature: up to +40 °C.
- Ambient temperature: -10 °C to +40 °C.
Priežiūra
Reguliarus techninis aptarnavimas užtikrina optimalų veikimą ir pailgina siurblio tarnavimo laiką. Prieš atlikdami techninę priežiūrą, visada atjunkite maitinimą.
- Reguliarūs patikrinimai: Inspect the pump and piping for leaks, corrosion, or damage.
- Sieto valymas: Periodically clean the foot valve strainer to prevent blockages and maintain flow.
- Žieminimas: In areas prone to freezing, drain the pump completely and store it in a warm, dry place, or insulate it adequately to prevent damage from ice expansion.
- Variklio apžiūra: Ensure the motor's cooling fins are free from dust and debris to prevent overheating.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Siurblys neįsijungia | No power supply; Motor overload; Seized impeller. | Check power connection and circuit breaker; Reset thermal overload; Contact service technician. |
| Siurblys veikia, bet vanduo netiekiamas | Pump not primed; Air leak in suction line; Foot valve clogged; Suction lift too high. | Re-prime the pump; Check all suction connections for leaks; Clean foot valve strainer; Reduce suction lift if possible. |
| Sumažėjęs srautas arba slėgis | Partial blockage in piping; Worn impeller; Air in system. | Inspect and clear piping; Contact service technician for impeller replacement; Bleed air from system. |
| Per didelis triukšmas ar vibracija | Cavitation (air in water); Loose mounting; Bearing wear. | Check for air leaks and ensure proper priming; Tighten mounting bolts; Contact service technician. |
Specifikacijos
| Parametras | Vertė |
|---|---|
| Modelis | JSWm/2CX |
| Prekės ženklas | Pedrollo |
| Galia (AG) | 1 AG |
| ttage / Dažnis | 220-230V / 50Hz |
| Maksimalus srauto greitis | 70 litrų per minutę |
| Skysčio temperatūros diapazonas | Iki +40 °C |
| Aplinkos temperatūros diapazonas | -10 °C iki +40 °C |
| Medžiaga | Stainless Steel (pump body components) |
| ASIN | B07HMZ2DKQ |
| Tarptautinis straipsnio kodas | 08052230012515 |
Note: The specification for "Power: 220 Watts" found in some product listings may refer to a specific component or a different metric. The pump's performance is rated at 1 HP.
Garantija ir palaikymas
For warranty information, technical support, or spare parts, please contact your authorized Pedrollo dealer or visit the official Pedrollo websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.
Gamintojas: PEDROLLO