Promed The File 525 elektrinis nagas File Vartotojo vadovas

1. Įvadas

The Promed The File 525 is a powerful electric nail file designed for professional and home use. It offers infinitely variable speed control up to 25,000 RPM, making it suitable for a wide range of applications including manicure, pedicure, and nail art. This device is ideal for working with gel, acrylic, and natural nails, as well as for removing thickened skin, calluses, and for cuticle care.

The Promed The File 525 is a quality product, proudly made in Germany.

2. Important Safety Instructions and Warnings

• Avoid excessive pressure or speed: Do not apply excessive pressure or operate the device at speeds higher than necessary. This can prevent damage to the device and reduce the risk of user injury.
• Keep handpiece interior clean: Ensure the interior of the handpiece remains free from dust and grinding residue. This minimizes the risk of dust inhalation and eye injuries from flying debris.
• Avoid rusted or damaged bits: Never use grinding bits that are rusted or damaged. This can lead to improper operation and potential injury.
• Protect from impacts: Do not expose the handpiece to strong impacts. Such impacts can damage the internal ball bearings, affecting performance and longevity.
• Profesionalus naudojimas: This device is intended for professional and careful home use. If unsure about proper techniques, seek professional guidance.

3. Pakuotės turinys

Prašome patikrinti, ar pakuotėje yra visi reikalingi daiktai:

• 1x Promed The File 525 Įrenginys
• 1x Stainless Steel Handpiece
• 1x Handpiece Holder
• 1x maitinimo adapteris
• 1x naudojimo instrukcija

4. Produktas baigtasview

The Promed The File 525 consists of a compact control unit and a lightweight, ergonomic handpiece. Key features include:

• Professional Quick-Release Chuck: Designed to securely hold all standard grinding bits (shaft diameter 2.332 mm to 2.350 mm).
• Left and Right Rotation: Switchable rotation direction for versatile use.
• All-in-One Rotary Control: A single knob for easy adjustment of both rotation direction and speed.
• Saugos stotelė: Automatic shutdown feature if excessive pressure or speed is detected during operation.
• Vibration-Free Handpiece: Made of stainless steel, weighing only 160g, ensuring comfortable and precise work.

1 pav. Baigtaview of the Promed The File 525 device and handpiece, highlighting key features like the professional rotating collet, 25,000 RPM, low heat generation, vibration-free stainless steel handpiece, all-in-one regulator, and rotational speed indicator.

5. Sąranka

1. Išpakuokite įrenginį: Atsargiai išimkite visus komponentus iš pakuotės.
2. Attach Handpiece Holder: The handpiece holder comes detached. It can be placed on either side of the control unit depending on your dominant hand. Use the provided strong double-sided mounting tape to secure it.
3. Prijunkite maitinimo adapterį: Plug the power adapter into the control unit and then into a suitable electrical outlet (100-240 VAC; 50-60 Hz).
4. Prijunkite rankenėlę: Plug the handpiece cable securely into the designated port on the control unit.
5. Initial Run-in (Important): Before first use, allow the handpiece to run for 30 minutes at approximately 10,000 RPM. This process helps to properly break in the internal components. Ensure a safety bit is installed during this run-in period.

6. Naudojimo instrukcijos

1. Inserting Grinding Bits:
   • To open the quick-release chuck, turn the front part of the handpiece to the left (counter-clockwise).
   • Insert the desired grinding bit with a shaft diameter between 2.332 mm and 2.350 mm fully into the chuck.
   • To secure the bit, turn the front part of the handpiece to the right (clockwise) until it clicks into place. Ensure the bit is firmly seated before operation.
   

   Figure 2: Illustration of how to open and close the quick-release chuck for bit insertion.

2. Įjungimas / išjungimas ir greičio valdymas:
   • The device features an "All-in-One" rotary control knob.
   • Turn the knob clockwise to turn on the device and increase the speed.
   • Turn the knob counter-clockwise to decrease the speed and turn off the device.
   • The rotational speed is infinitely variable up to 25,000 RPM. LEDs on the control unit indicate the approximate speed level.
3. Sukimosi krypties keitimas:
   • The device supports both left (counter-clockwise) and right (clockwise) rotation.
   • The rotation direction can be switched using the "All-in-One" rotary control. Consult the specific markings on the control unit for direction selection.
4. Using the Safety Stop:

   The integrated Safety Stop feature automatically shuts down the device if it detects excessive pressure or speed during grinding. This is a safety mechanism to prevent damage to the device and potential injury. If the device stops unexpectedly, reduce pressure or speed and restart.

7. Priežiūra ir priežiūra

• Handpiece Cleaning: Keep the interior of the handpiece as free as possible from dust and grinding residue. For external cleaning, use a cloth lightly dampened with alcohol. Avoid any moisture entering the interior of the handpiece.
• Antgalių patikrinimas: Regularly inspect grinding bits for rust or damage. Replace any compromised bits immediately to ensure safe and effective operation.
• Saugykla: Store the device and its components in a clean, dry place, protected from strong impacts.

8. Problemų sprendimas

9. Specifikacijos

10. Garantija ir palaikymas

Promed offers excellent customer service for repairs and maintenance. For any inquiries, support, or service needs, please contact us directly.

El. paštas: service@promed.de

We strive to find the most accommodating solutions for our customers.