Lexmark MS810N Laser Printer User Manual

Įvadas

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Lexmark MS810N monochrome laser printer. Please read this guide thoroughly to ensure proper use and to maximize the performance and longevity of your device.

Vaizdas: priekis view of the Lexmark MS810N Laser Printer, showing its compact design and control panel.

Sąranka

1. Išpakavimas ir pradinė apžiūra

Atsargiai išimkite spausdintuvą iš pakuotės. Patikrinkite, ar yra visi pridedami komponentai:

• Lexmark MS810N Laser Printer
• Tonerio kasetė
• Būgnų blokas
• Maitinimo kabelis
• Network/USB Cable (where applicable)

Inspect the printer for any visible damage. If damage is found, do not proceed with setup and contact support.

2. Installing the Toner Cartridge and Drum Unit

1. Atidarykite spausdintuvo priekines dureles.
2. Remove the drum unit from its protective packaging.
3. Insert the drum unit into the printer until it clicks into place.
4. Unpack the toner cartridge. Gently shake it horizontally to distribute the toner evenly.
5. Insert the toner cartridge into the drum unit until it locks securely.
6. Uždarykite priekines prieigos dureles.

3. Popieriaus įdėjimas

The printer supports plain paper up to A4/Letter size with a maximum input sheet capacity of 650 sheets.

1. Atidarykite popieriaus dėklą.
2. Sureguliuokite popieriaus kreipiklius pagal įdedamo popieriaus dydį.
3. Įdėkite popieriaus krūvą į dėklą, užtikrindami, kad ji būtų plokščia ir žemiau maksimalaus užpildymo linijos.
4. Uždarykite popieriaus dėklą.

4. Connecting Power and Network/USB

• Galia: Connect the power cable to the printer and then to a grounded electrical outlet (110 Volts).
• Tinklas (eternetas): Norėdami spausdinti tinkle, prijunkite spausdintuvo eterneto kabelį prie tinklo maršrutizatoriaus arba komutatoriaus eterneto prievado.
• USB: For direct connection, connect a USB cable from the printer's USB port to your computer.

5. Installing Printer Drivers

After connecting the printer, install the necessary drivers on your computer. Drivers can typically be found on the Lexmark official support website by searching for the MS810N model. Follow the on-screen instructions for installation.

Naudojimo instrukcijos

1. Pagrindinis spausdinimas

Norėdami spausdinti dokumentą:

1. Įsitikinkite, kad spausdintuvas įjungtas ir prijungtas prie kompiuterio arba tinklo.
2. Atidarykite dokumentą, kurį norite spausdinti, savo kompiuteryje.
3. Pasirinkite File > Spausdinti (arba lygiavertę komandą jūsų programoje).
4. Choose the Lexmark MS810N from the list of available printers.
5. Pagal poreikį pakoreguokite spausdinimo nustatymus (pvz., kopijų skaičių, popieriaus dydį, dvipusį spausdinimą).
6. Spustelėkite Spausdinti.

The printer is capable of monochrome printing at speeds up to 55 pages per minute (ppm).

2. Valdymo skydelio naudojimas

The Lexmark MS810N features a 2.4-inch LCD display. Use the navigation buttons next to the display to access printer settings, view status, and perform various functions directly from the printer.

• Būsena: Check current printer status, toner levels, and error messages.
• Nustatymai: Configure network settings, paper type, and other printer preferences.
• Ataskaitos: Print configuration pages or usage reports.

3. Duplex Printing (Two-Sided)

The MS810N supports automatic dual-sided printing. To enable this feature, select the duplex printing option within your computer's print dialog box before sending the print job.

Priežiūra

1. Replacing Toner Cartridge and Drum Unit

When the printer indicates low toner or a drum unit nearing its end of life, replace the respective component. Refer to the installation steps in the Setup section for guidance. Always use genuine Lexmark replacement parts for optimal performance.

2. Spausdintuvo valymas

Reguliarus valymas padeda išlaikyti spausdinimo kokybę ir prailgina spausdintuvo tarnavimo laiką.

• Prieš valydami išjunkite ir atjunkite spausdintuvą nuo elektros tinklo.
• Išorę nuvalykite minkštu, nepūkuotu skudurėliu.
• Periodically clean the paper path rollers to prevent paper jams. Consult the full Lexmark service manual for detailed cleaning procedures.

3. Clearing Paper Jams

If a paper jam occurs, the printer's display will show an error message. Follow these general steps:

1. Išjunkite spausdintuvą ir atjunkite jį.
2. Open all accessible covers and trays.
3. Carefully remove any jammed paper, pulling in the direction of the paper path to avoid tearing.
4. Įsitikinkite, kad viduje nėra mažų popieriaus gabalėlių.
5. Close all covers and trays, then plug in and power on the printer.

Trikčių šalinimas

For more detailed troubleshooting, refer to the comprehensive Lexmark support documentation available online.

Specifikacijos

Informacija apie garantiją

This renewed Lexmark MS810N printer comes with a 90 dienų ribota garantija. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the documentation provided with your purchase or contact the seller directly. Renewed products are also eligible for replacement or refund under the Amazon Renewed Guarantee if not satisfied with the purchase.

Palaikymas

For technical assistance, driver downloads, or further support regarding your Lexmark MS810N printer, please visit the official Lexmark support website. For issues related to your renewed product purchase or warranty claims, contact the seller, Printer Ready Canada, or Amazon Renewed customer service.

• Lexmark Support: Nurodykite Lexmark's official support websvetainę tvarkyklėms, vadovams ir DUK.
• Pardavėjo palaikymas: Contact Printer Ready Canada for purchase-specific inquiries.
• „Amazon“ atnaujinta garantija: For details on returns and refunds, visit the „Amazon“ atnaujinta parduotuvė.