1. Įvadas
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your STELPRO SORB2002MW Sorb Series Orléans High-End Bathroom Fan Heater. Please read all instructions carefully before use and retain this manual for future reference.

1 pav.: priekis view of the STELPRO SORB2002MW Sorb Series Orléans Bathroom Fan Heater.
2. Saugos informacija
Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons. This heater is designed for indoor use only. Do not install in areas where it may be exposed to water or excessive humidity. Ensure proper grounding and wiring according to local electrical codes.
- Elektros sauga: This unit operates at 240/208V and requires a hardwired connection. Installation must be performed by a qualified electrician.
- Klirensas: Maintain adequate clearance from combustible materials. Refer to installation instructions for specific distances.
- Priežiūra: Atidžiai prižiūrėti būtina, kai bet kurį prietaisą naudoja vaikai arba neįgalūs asmenys arba jie yra šalia jų.
- Priežiūra: Do not attempt to repair or replace any part of the heater unless specifically recommended in this manual. All other servicing should be referred to a qualified service technician.
3. Produkto ypatybės
- Galingas šildymas: Provides adjustable heating options, delivering up to 2000W of power for rapid warmth.
- Smart Connected Control: Built-in Smart Thermostat with Zigbee Connectivity allows remote temperature control through your Zigbee or Smart Home Hub App.
- Tylus veikimas: Known as one of the quietest fan heaters in its category, ideal for maintaining a peaceful environment.
- Patvari konstrukcija: Constructed with a high-performance polymer cabinet and satin-finish steel front for lasting quality and rust resistance.
- Šiluminė apsauga: Includes thermal protection with automatic reset for enhanced safety and reliability.

Figure 2: Key features of the STELPRO Sorb Series Orléans heater.
4. Montavimas
The STELPRO SORB2002MW is designed for wall-mounted installation. Ensure the mounting surface is firm and free from combustible materials. A suitable 240V electrical outlet or hardwired connection point must be available nearby.
4.1 Matmenys

3 pav.: Gaminio matmenys, skirti montavimo planavimui.
4.2 Elektros prijungimas
This heater requires a 240V hardwired connection. Consult a qualified electrician for proper wiring to ensure safety and compliance with local electrical codes.

Figure 4: Hardwired connection diagram.
4.3 Įrengimo veiksmai (bendrieji viršview)
- Paruoškite sieną: Select a suitable wall location, ensuring it is a firm surface and there are no obstructions.
- Gręžimo taškų žymėjimas: Use a template (if provided) or measure carefully to mark the positions for wall anchors.
- Gręžimo skylės: Drill holes at the marked positions. For drywall, use appropriate wall anchors.
- Šildytuvo montavimas: Secure the top anchors first, then hang the heater and secure the bottom anchors.
- Prijunkite laidus: Connect the electrical wiring as per the electrical diagram and local codes.
- Pritvirtinkite priekinį skydelį: Securely attach the front panel to the heater.
4.4 Įdiegimo vaizdo įrašas
1 vaizdo įrašas: Įdiegimas baigtasview for a Stelpro wall heater (Stelpro SOA Wall Heater, 0:30).
Video 2: Mirage heater details, showing design and features (Stelpro Mirage, 0:30).
5. Naudojimo instrukcijos
The STELPRO SORB2002MW features a built-in smart thermostat for precise temperature control and various operating modes.
5.1 Valdymo skydas

Figure 5: Digital control panel for temperature and mode selection.
5.2 Smart Boost Mode
Activate the Smart "Boost Mode" for a rapid temperature rise when quick heating is desired. This feature quickly brings the room to your desired comfort level.

Figure 6: The heater is designed for quiet operation.
5.3 Išmaniųjų namų integracija
The built-in smart thermostat with Zigbee connectivity allows you to control the heater remotely via your smart home hub app. This enables seamless integration with other smart devices and remote management of your heating.

Figure 7: Remote control via smartphone app using Zigbee.

Figure 8: Compatibility with SmartThings and Amazon Alexa for enhanced control.
6. Priežiūra
Reguliarus šildytuvo aptarnavimas užtikrina optimalų veikimą ir ilgaamžiškumą.
- Valymas: Ensure the heater is turned off and disconnected from power before cleaning. Use a soft, damp šluoste valykite išorę. Nenaudokite abrazyvinių valiklių ar tirpiklių.
- Oro įsiurbimas / išleidimas: Periodically check and clean the air intake and outlet grilles to prevent dust buildup, which can impede airflow and reduce efficiency.
- Nėra naudotojo aptarnaujamų dalių: The internal components are not user-serviceable. Do not open the unit.
7. Problemų sprendimas
If your heater is not operating correctly, refer to the following common issues before contacting customer support.
- Šildytuvas neįsijungia: Check the circuit breaker and ensure the unit is properly connected to the power supply. Verify the thermostat settings.
- Nėra šilumos išvesties: Confirm the heater is in heating mode and the temperature setting is above the ambient room temperature.
- Neįprasti garsai: Ensure the unit is securely mounted and free from obstructions. If unusual noises persist, discontinue use and contact customer support.
- Išmaniojo valdymo problemos: Verify your Zigbee hub is properly configured and connected to the internet. Check the heater's connection status in your smart home app.
8. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Prekės ženklas | „Stelpro“ |
| Modelio numeris | SORB2002MW |
| Maitinimo išvestis | 2000W / 1500W |
| ttage | 240V / 208V |
| Spalva | Baltas |
| Matmenys (G x P x A) | 10.4G x 30.5P x 40.2A centimetrų |
| Prekės svoris | 4.26 kg |
| Ypatingos savybės | Digital Display, Electronic Thermostat, Energy Efficient, Fast Heating, Noiseless |
| Montavimo tipas | Sieninis laikiklis |
| Šildymo būdas | Priverstinis oras |
| Naudojimas viduje / lauke | Vidinis |
9. Garantija ir palaikymas
The STELPRO SORB2002MW heater comes with a 5 metų garantija, including 3 years on electronic components. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact Stelpro customer service directly. Keep your proof of purchase for warranty validation.
For further assistance, visit the official Stelpro websvetainėje arba susisiekite su jų klientų aptarnavimo tarnyba.