1. Įvadas
The GameMax Mirage 120mm PC Cooling Fan is designed to provide efficient cooling for computer components while offering customizable RGB lighting. This fan features a dual-ring Rainbow LED design, a hydraulic bearing for quiet operation, and a 7-blade fan structure. It is compatible with 5V addressable 3-pin Aura Sync systems, allowing for synchronized lighting effects with compatible motherboards or controllers.
1.1 vaizdas: priekis view of the GameMax Mirage fan with active Rainbow LED lighting.
2. Saugos informacija
- Ensure your computer system is powered off and unplugged from the wall outlet before installation or maintenance.
- Atsargiai elkitės su komponentais, kad jų nepažeistumėte statinė elektra. Apsvarstykite galimybę naudoti antistatinį riešo dirželį.
- Do not force connectors. Ensure correct orientation before plugging in cables.
- Ventiliatorių laikykite atokiau nuo skysčių ir per didelės drėgmės.
- Do not attempt to disassemble the fan unit beyond what is described in this manual.
3. Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:
- 1 x GameMax Mirage 120mm PC Cooling Fan
- 4 x montavimo varžtai
Image 3.1: Retail packaging for the GameMax Mirage fan.
4. Sąranka ir diegimas
Follow these steps to install your GameMax Mirage 120mm PC Cooling Fan:
- Paruoškite savo sistemą: Power off your computer and unplug it from the power outlet. Open your computer case to access the fan mounting locations.
- Ventiliatoriaus montavimas: Position the fan in your desired location (e.g., case front, rear, top, or radiator). Ensure the airflow direction is correct for your cooling setup. Use the four included mounting screws to secure the fan to the chassis or radiator. The fan features rubber pads on the corners to help reduce vibration.
- Prijunkite ventiliatoriaus maitinimą: Locate the 3-pin power connector on the fan cable. Connect this cable to an available 3-pin fan header on your motherboard or a fan controller.
- Prijunkite RGB apšvietimą: Locate the 5V addressable 3-pin Aura connector on the fan cable. Connect this to a compatible 5V ARGB header on your motherboard (often labeled 'VDG' or 'ARGB') or an external RGB controller/hub. Warning: Do not connect this to a 12V RGB header, as it will damage the LEDs.
Image 4.1: The 3-pin power connector (top) and 5V addressable 3-pin Aura connector (bottom).
The fan cables are braided for improved aesthetics and durability, helping to keep your build neat and tidy.
5. Naudojimo instrukcijos
Once installed, the GameMax Mirage fan operates as follows:
- Ventiliatoriaus greičio valdymas: The fan speed is controlled via the 3-pin power connector. If connected to a motherboard fan header, the speed can typically be adjusted through your motherboard's BIOS/UEFI settings or dedicated software.
- RGB apšvietimo valdymas: The Rainbow LED lighting is controlled via the 5V addressable 3-pin Aura connector.
- If connected to a compatible motherboard (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync), you can use the motherboard's software to customize lighting effects, colors, and synchronization with other ARGB components.
- If connected to an external RGB hub/controller, refer to the instructions provided with your specific hub/controller for lighting customization options.
5.1 paveikslas: Kampinis view of the GameMax Mirage fan showcasing its dual-ring Rainbow LED lighting.
6. Priežiūra
Regular maintenance helps ensure optimal performance and longevity of your cooling fan:
- Dulkių valymas: Periodically inspect the fan blades and frame for dust accumulation. Use compressed air or a soft brush to gently remove dust. Ensure the fan is powered off and unplugged before cleaning.
- Kabelio apžiūra: Occasionally check the power and RGB cables for any signs of wear or damage.
7. Problemų sprendimas
- Ventiliatorius nesisuka:
- Ensure the 3-pin power connector is securely plugged into a functional fan header on the motherboard or controller.
- Check motherboard BIOS/UEFI settings to ensure the fan header is enabled and configured correctly.
- LEDs Not Lighting Up or Incorrect Colors:
- Verify the 5V addressable 3-pin Aura connector is securely connected to a compatible 5V ARGB header (not 12V RGB).
- Ensure your motherboard's RGB software or external controller is properly installed and configured.
- If using a splitter or hub, ensure it is powered and functioning correctly.
- Per didelis triukšmas:
- Patikrinkite, ar nėra laidų ar kliūčių, trukdančių ventiliatoriaus menčių judėjimui.
- Ensure the fan is securely mounted and the rubber pads are properly seated to absorb vibrations.
- Dust accumulation can cause imbalance and noise; clean the fan as described in the Maintenance section.
8. Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Modelis | MIRAGEWHITE FINS |
| Ventiliatoriaus dydis | 120 mm x 120 mm x 25 mm (0.98 x 4.72 x 4.72 colio) |
| Guolio tipas | Hidraulinis guolis |
| Ventiliatorių mentės | 7 peiliukai |
| LED tipas | Addressable Rainbow LED (Dual-Ring) |
| Ventiliatoriaus maitinimo jungtis | 3-Pin |
| RGB jungtis | 5V Addressable 3-Pin Aura Connector |
| Veiklos ttage | 5 Volts (for RGB) / 12 Volts (for fan motor, typical for 3-pin) |
| Įvertinta Wattage | 3 vatų |
| Maksimalus sukimosi greitis | 1800 aps./min |
| Triukšmo lygis | Maždaug 25 dB(A) |
| Medžiaga | Rubber (for vibration dampvakaras) |
8.1 paveikslas: Nugara view of the GameMax Mirage fan, displaying the product label with model and electrical specifications.
9. Garantija ir palaikymas
Dėl garantijos informacijos ir techninės pagalbos kreipkitės į oficialią „GAMEMAX“ svetainę. websvetainėje arba susisiekite su pardavėju. Išsaugokite pirkimo įrodymą, jei prireiktų pateikti garantinį prašymą.