„Qlima PGWH 1010“ nešiojamojo dujinio vandens šildytuvo ir lauko dušo naudotojo vadovas

1. Įvadas

Thank you for choosing the Qlima PGWH 1010 Portable Gas Water Heater and Outdoor Shower. This device is designed to provide instant hot water for various outdoor activities such as camping, washing vehicles, or bathing pets. Its portable and compact design ensures convenience and ease of use. Please read this manual thoroughly before installation and operation to ensure safe and efficient use of the product.

2. Saugos instrukcijos

Your safety is paramount. Always follow these instructions to prevent injury or damage.

2.1 Bendra sauga

• Prieš pradėdami naudoti prietaisą, perskaitykite visas instrukcijas.
• Prietaiso veikimo metu laikykite vaikus ir naminius gyvūnus toliau nuo prietaiso.
• Use the appliance only in well-ventilated outdoor areas. Never use indoors or in enclosed spaces.
• Do not modify the appliance or use non-original parts.
• Ensure the appliance is stable and securely hung during use.

2.2 Dujų sauga

• Use only the specified gas type (G30-butane / propane / LPG) and recommended gas pressure (28-30-37 mbar).
• Always check for gas leaks using soapy water at all connections before each use. Never use an open flame.
• Ensure gas cylinders are stored upright and away from heat sources.
• Disconnect the gas supply when the appliance is not in use or during maintenance.

2.3 Vandens saugumas

• Ensure adequate water pressure (between 0.2 and 10 bar) for proper operation.
• Do not operate the unit without water flowing through it (dry-run protection is included, but it's best to avoid).
• Drain all water from the unit before storing or in freezing conditions to prevent damage.
• The maximum water temperature can reach 70°C. Exercise caution to avoid scalding.

3. Produktas baigtasview

The Qlima PGWH 1010 is a compact and portable water heater designed for outdoor use. It features a durable white casing with integrated controls and connections.

1 pav.: priekis view of the Qlima PGWH 1010 unit with attached shower head and hose.

3.1 Komponentai

• Pagrindinis blokas: The central heating component.
• Integruota rankena: For easy carrying and hanging.
• Shower Head with Hose: For water delivery.
• Dujų įvadas: Dujų tiekimo žarnos prijungimo taškas.
• Vandens įvadas: Connection point for the cold water supply hose.
• Vandens išleidimo anga: Connection point for the shower hose.
• Removable Drain Valve: Įsikūręs apačioje vandens nutekėjimui.

3.2 Valdikliai ir ekranas

2 pav.: Valdymo skydelio stambus planas.

• Gas Flow Control Knob (Left): Adjusts the gas supply to the burner, influencing the heat output. Marked with flame icons (Min to Max).
• Water Flow Control Knob (Right): Adjusts the water flow rate through the unit. Marked with water droplet icons (Max to Min).
• Skystųjų kristalų ekranas: Shows the current water temperature.

4. Sąranka

Follow these steps to set up your Qlima PGWH 1010 for first use.

4.1 Įdėjimas

• Hang the unit securely using its integrated handle in a well-ventilated outdoor area. Ensure it is stable and cannot fall.
• Keep the unit away from flammable materials and ensure adequate clearance around it.

4.2 Dujų prijungimas

• Connect the gas supply hose to the gas inlet on the bottom of the unit. Tighten securely.
• Connect the other end of the gas hose to your gas cylinder (butane/propane/LPG) with the appropriate regulator.
• Before opening the gas cylinder valve, apply soapy water to all gas connections. Open the gas valve slowly and check for bubbles, which indicate a leak. If a leak is detected, close the gas valve immediately and re-tighten connections. Do not proceed until all leaks are resolved.

4.3 Vandens jungtis

• Connect a cold water supply hose to the water inlet on the bottom of the unit. Tighten securely.
• Connect the shower hose to the water outlet on the bottom of the unit. Tighten securely.
• Ensure the water supply is capable of providing the required pressure (0.2 to 10 bar).

5. Naudojimo instrukcijos

Once the unit is properly set up, follow these steps to operate it.

1. Atviras dujų tiekimas: Lėtai atidarykite dujų baliono vožtuvą.
2. Atviras vandens tiekimas: Įjunkite šalto vandens tiekimą į įrenginį.
3. Initiate Water Flow: Press the trigger on the shower head to allow water to flow. The unit will automatically ignite once water flow is detected. The LED display will show the current water temperature.
4. Reguliuoti temperatūrą:
   • To increase water temperature, turn the Gas Flow Control Knob (left) towards 'Max' or turn the Vandens srauto valdymo rankenėlė (right) towards 'Min' (reducing water flow allows more time for heating).
   • To decrease water temperature, turn the Gas Flow Control Knob (left) towards 'Min' or turn the Vandens srauto valdymo rankenėlė (right) towards 'Max' (increasing water flow reduces heating time).
5. Išjungimas: To turn off the unit, first close the gas supply valve on the gas cylinder, then close the water supply tap. The unit will automatically shut down.

Pastaba: The unit features automatic shut-off and dry-run protection for safety.

6. Priežiūra

Reguliarus vandens šildytuvo aptarnavimas užtikrina jo ilgaamžiškumą ir optimalų veikimą.

6.1 Valymas

• Nuvalykite įrenginio išorę minkšta, damp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Ensure the burner area is free from dust and debris.

6.2 Išleidimas ir sandėliavimas

• Before storing the unit or if there is a risk of freezing temperatures, completely drain all water from the system. Use the removable drain valve located at the bottom of the unit.
• Disconnect all hoses and the gas supply.
• Store the unit in a dry, safe place, protected from extreme temperatures and direct sunlight.

7. Problemų sprendimas

If you encounter issues with your Qlima PGWH 1010, refer to the following common problems and solutions.

• Be karšto vandens:
  • Check if the gas cylinder is open and has sufficient gas.
  • Ensure the water supply is open and providing adequate pressure.
  • Verify that the gas and water connections are secure and free of leaks.
  • Confirm that water is flowing through the shower head when the trigger is pressed.
• Unit Not Igniting:
  • Check gas supply and connections as above.
  • Ensure sufficient water flow to activate the ignition sensor.
  • If the unit has batteries for ignition (not explicitly stated but common), check if they need replacement.
• Water Too Hot or Too Cold:
  • Adjust the Gas Flow Control Knob (left) to increase or decrease heat.
  • Adjust the Water Flow Control Knob (right) to increase or decrease water flow. A slower flow generally results in hotter water.
• Žemas vandens slėgis:
  • Check your external water supply for adequate pressure.
  • Ensure hoses are not kinked or blocked.

If problems persist after following these steps, please contact Qlima customer support.

8. Specifikacijos

Technical details for the Qlima PGWH 1010 Portable Gas Water Heater.

9. Garantija ir palaikymas

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Qlima websvetainėje. Išsaugokite pirkimo įrodymą, jei prireiktų pateikti garantinį ieškinį.