Inkbird ITC308S Temperature Controller User Manual

1. Įvadas

The Inkbird ITC308S is a reliable and easy-to-use temperature controller designed for precise temperature management in various applications, particularly aquariums. It features dual relay outputs for both heating and cooling devices, ensuring stable temperature control. The unit includes a fully submersible probe for accurate temperature readings in liquid environments.

2. Saugos informacija

• Ensure the power supply matches the controller's requirements (110V for this model).
• Do not immerse the main controller unit in water. Only the probe is submersible.
• Prieš atlikdami bet kokius techninės priežiūros ar montavimo darbus, visada atjunkite maitinimą.
• Prietaisą laikykite atokiau nuo vaikų ir naminių gyvūnėlių.
• Nenaudokite prietaiso, jei kuri nors dalis yra pažeista.

3. Pakuotės turinys

• ITC308S Temperature Controller Unit
• Submersible Temperature Probe
• Suction Cup for Probe Mounting
• Vartotojo vadovas

3.1 paveikslas: The Inkbird ITC308S Temperature Controller and its included accessories, packaged in a brown box.

4. Produktas baigtasview

The ITC308S features a main control unit with a dual LED display, showing both the present value (PV) and set value (SV) temperatures. It has dedicated outlets for heating and cooling devices, and a detachable submersible probe for accurate temperature sensing.

4.1 paveikslas: Baigėsiview of the Inkbird ITC308S controller, showing the display, control buttons, power cord, and probe connection.

4.2 paveikslas: The dual power outlets, clearly marked for 'HEATING' and 'COOLING' devices.

4.3 paveikslas: The submersible temperature probe, designed for accurate readings in water, shown with its suction cup.

5. Specifikacijos

6. Sąrankos instrukcijos

1. Prijunkite zondą: Plug the submersible temperature probe into the designated port on the main controller unit. Use the provided suction cup to secure the probe inside your aquarium or water bath, ensuring it is fully submerged and away from direct heat sources or strong currents.
2. Connect Heating/Cooling Devices: Plug your heating device (e.g., aquarium heater) into the 'HEATING' outlet and your cooling device (e.g., cooling fan) into the 'COOLING' outlet on the power strip. Ensure devices are rated within the controller's maximum output load (1200W).
3. Maitinimas: Plug the main power cord of the ITC308S controller into a standard 110V AC power outlet. The LED display will illuminate, showing the current temperature (PV) and the set temperature (SV).

6.1 paveikslas: The submersible probe correctly placed within an aquarium, ensuring accurate temperature measurement.

7. Naudojimo instrukcijos

1. View Current Temperature (PV): The upper LED display shows the current measured temperature (Process Value).
2. View Set Temperature (SV): The lower LED display shows the desired set temperature (Set Value).
3. Nustatyti temperatūrą:
   • Paspauskite NUSTATYTI button once. The SV display will flash.
   • Naudokite Aukštyn (▲) or Žemyn (▼) mygtukai norimai temperatūrai reguliuoti.
   • Paspauskite NUSTATYTI again to confirm and save the setting, or wait a few seconds for it to save automatically.
4. Heating/Cooling Indication: The 'HEATING' or 'COOLING' indicator lights will illuminate when the respective outlet is active.
5. Temperatūros kalibravimas: Refer to the detailed instructions in the included paper manual for advanced settings like temperature calibration, differential settings, and alarm parameters. These settings allow fine-tuning of the controller's response.
6. Signalizacijos: The controller features over-temperature and sensor fault alarms. If an alarm triggers, the display will show an error code (e.g., 'HHH' for over-temperature, 'LLL' for under-temperature, 'ERR' for sensor fault) and an audible alert may sound. Address the issue promptly.

8. Priežiūra

• Zondo valymas: Regularly inspect and clean the submersible probe to prevent algae or mineral buildup, which can affect accuracy. Use a soft cloth and mild cleaning solution if necessary.
• Valdiklio blokas: Wipe the main controller unit with a dry, soft cloth. Do not use abrasive cleaners or immerse it in water.
• Kabelio apžiūra: Periodically check all cables for any signs of wear, cuts, or damage. Replace if necessary.

9. Problemų sprendimas

10. Garantija ir palaikymas

Inkbird products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official Inkbird websvetainę. Išsaugokite pirkimo čekį garantiniams reikalavimams.