1. Produktas baigtasview
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- Mechaninis stabdys: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- Didelės talpos variklis: Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- Ergonomiškas dizainas: Compact and ergonomic form for comfortable handling.
- Apsauginio dangtelio reguliavimas be įrankių: The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. Saugos instrukcijos
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
Bendra sauga
- Visada dėvėkite tinkamas asmenines apsaugos priemones (AAP), įskaitant apsauginius akinius, klausos apsaugą, pirštines ir dulkių kaukę.
- Įsitikinkite, kad ruošinys tvirtai pritvirtintasampprieš operaciją.
- Keep hands clear of rotating parts and the cutting/grinding area.
- Nenaudokite įrankio sprogioje aplinkoje, pvz., ten, kur yra degių skysčių, dujų ar dulkių.
- Dirbdami su elektriniu įrankiu saugokite vaikus ir pašalinius asmenis.
Elektros sauga
- Užtikrinkite maitinimo šaltinio ttage atitinka įrankio specifikacijų lentelėje nurodytą vertę.
- Nepiktnaudžiaukite laidu. Niekada nenaudokite laido elektrinio įrankio nešimui, traukimui ar atjungimui. Laikykite laidą toliau nuo karščio, alyvos, aštrių kraštų ar judančių dalių.
- Jei naudojate elektrinį įrankį skelbimeamp vieta yra neišvengiama, naudokite nuotėkio srovės įtaiso (RCD) apsaugotą maitinimą.
Speciali kampinio šlifuoklio sauga
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. Komponentai ir funkcijos
Pagrindiniai komponentai:
- Pagrindinis korpusas: Houses the motor, electronics, and gearbox.
- Apsauginė apsauga: Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- Veleno užrakinimo mygtukas: For easy disc changes.
- Stumdomas jungiklis: Užrakinamas nepertraukiamam veikimui.
- Greičio pasirinkimo ratukas: For variable speed control (see Figure 2).
- Oro angos: For motor cooling and dust expulsion.
4. Sąranka
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
Mounting the Protective Guard
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Unplug the tool from the power supply.
- Paspauskite ir palaikykite veleno fiksavimo mygtuką.
- Įdėkite vidinį clampjungę ant veleno.
- Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
- Prisukite klamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- Atleiskite veleno fiksavimo mygtuką.
5. Naudojimo instrukcijos
Maitinimo įjungimas/išjungimas
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
Kintamo greičio valdymas
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- Visada tvirtai laikykite trintuvą abiem rankomis.
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. Priežiūra
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
Valymas
- Prieš valydami įrankį visada ištraukite iš elektros tinklo.
- Reguliariai valykite ventiliacijos angas, kad nesikauptų dulkės, kurios gali sukelti perkaitimą. Jei įmanoma, naudokite suslėgtą orą.
- Nuvalykite įrankio išorę reklaminiu valikliuamp audinys. Nenaudokite stiprių cheminių medžiagų ar abrazyvinių valiklių.
Anglies šepetėliai
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
Sandėliavimas
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Įrankis neįsijungia | Nėra maitinimo Restart interlock activated (after power failure) Pažeistas maitinimo laidas | Patikrinkite maitinimo jungtį Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| Įrankis sustoja veikimo metu | Suaktyvinta apsauga nuo perkrovos Disc jammed (anti-kickback activated) | Reduce pressure; allow tool to cool Release switch, clear obstruction, then restart |
| Per didelė vibracija | Worn or damaged disc Netinkamai sumontuotas diskas Laisva rankena | Pakeiskite diską Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | Dėvėti angliniai šepetėliai Dust buildup in vents | Have brushes inspected/replaced by service center Kruopščiai išvalykite oro angas |
8. Specifikacijos
| Būdingas | Vertė |
|---|---|
| Modelio numeris | 447668 |
| Maitinimo įvestis | 1700 W |
| Maitinimo išvestis | 1050 W |
| ttage | 230 V |
| Dažnis | 50/60 Hz |
| Maks. Disko skersmuo | 125 mm |
| Greitis be apkrovos | 2800-11500 aps./min |
| Tool Holder (Angle Grinder) | M14 |
| Kabelio ilgis | 4 m |
| Matmenys (I x P x A) | 340 x 77 x 105 mm |
| Svoris | 2.6 kg |
| Spalva | Raudona, juoda, sidabrinė |
| Medžiaga | Metalas |
9. Garantija ir palaikymas
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex websvetainėje arba ant jūsų produkto pakuotės.