Vadovai+

Timex T2352

Timex T2352 Dual Digital Alarm Clock User Manual

Modelis: T2352

Įvadas

Ačiū, kad pirkoteasing the Timex T2352 Dual Digital Alarm Clock. This device features a clear LED display, FM radio, dual alarms, a built-in speaker, and a convenient USB charging port. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your alarm clock to ensure optimal performance.

Timex T2352 Dual Digital Alarm Clock with power adapter

Priekyje view of the Timex T2352 Dual Digital Alarm Clock, showing the green LED display, USB charging port, and included power adapter.

Sąranka

1. Maitinimo prijungimas

Connect the included 100V-240V universal power adapter to the DC 5V 1.5A input jack located on the back of the unit. Plug the adapter into a standard wall outlet. The clock display will illuminate.

2. Baterijos atsarginės kopijos įrengimas

For battery backup, open the battery compartment on the bottom of the unit. Insert two (2) AAA batteries (not included), ensuring correct polarity (+ and -). The battery backup maintains time and alarm settings during a power outage but will not power the display or alarm functions.

Atgal view of Timex T2352 showing battery compartment

Galinis view of the alarm clock, highlighting the battery compartment and power input.

3. FM antena

Extend the FM wire antenna located at the back of the unit for optimal radio reception. Adjust its position as needed to improve signal clarity.

Naudojimo instrukcijos

1. Laiko nustatymas

  1. Paspauskite ir palaikykite LAIKRODIS button (located on the top/rear of the unit) until the time display flashes.
  2. Naudokite VALANDOS ir MIN buttons (located on the side) to adjust the hour and minute. Pay attention to the PM indicator.
  3. Paspauskite LAIKRODIS dar kartą paspauskite mygtuką, kad patvirtintumėte ir išeitumėte iš laiko nustatymo režimo.
Šoninė view of Timex T2352 with control buttons

Šoninė view of the alarm clock, showing the 'SLEEP', 'AUX', 'MINS', 'HOURS', and alarm setting buttons.

2. Žadintuvų nustatymas (dvigubas žadintuvas)

Įrenginys turi du nepriklausomus signalizacijos signalus (1 signalizacija ir 2 signalizacija).

  1. Paspauskite ir palaikykite Signalas 1 or Signalas 2 button (located on the side) until the alarm time flashes.
  2. Naudokite VALANDOS ir MIN mygtukus, kad nustatytumėte norimą žadintuvo laiką.
  3. Paspauskite Signalas 1 or Signalas 2 button repeatedly to cycle through alarm modes: Buzzer, Radio, or Off. The corresponding indicator (BUZZ or RADIO) will light up.
  4. Paspauskite Signalizacija dar kartą paspauskite mygtuką, kad patvirtintumėte ir išeitumėte iš žadintuvo nustatymo režimo.

3. Snaudimo funkcija

When the alarm sounds, tap anywhere on the top surface of the unit to activate the snooze function. The alarm will temporarily silence and sound again after approximately 9 minutes.

Į viršų view of Timex T2352 showing snooze area

Į viršų view of the alarm clock, indicating the large area for easy press snooze and display dimmer.

4. FM radijo veikimas

5. Miego laikmatis

The sleep timer allows you to fall asleep to the radio, which will automatically turn off after a set period (programmable from 10-90 minutes).

  1. Kol groja radijas, paspauskite MIEGAS button. The sleep time will appear on the display.
  2. Paspauskite MIEGAS button repeatedly to cycle through the available sleep times.
  3. Radijas automatiškai išsijungs po pasirinkto laiko.

6. USB įkrovimo prievadas

1 Amp USB charging port on the front of the unit allows you to charge your smartphone or other USB-powered devices. Connect your device's USB charging cable (not included) to the port.

Timex T2352 charging a phone

The Timex T2352 alarm clock with a smartphone connected to its front USB charging port.

7. Aux-in jungtis

Connect an external audio source (e.g., smartphone, MP3 player) to the AUX-IN jack located on the top/rear of the unit using a 3.5mm audio cable (not included). The unit's speaker will play audio from the connected device.

Į viršų view of Timex T2352 showing speaker and aux-in

Į viršų view of the alarm clock, showing the built-in speaker and the AUX-IN port.

8. Ekrano pritemdymas

The 0.9" green LED display has a dimmer function. Tap the SNAIGĖ / EKRANO DIMMERIS area on the top of the unit to cycle between bright and dim display settings.

Priežiūra

Valymas

Wipe the unit with a soft, dry cloth. Do not use liquid cleaners or abrasive materials. Ensure the unit is unplugged before cleaning.

Baterijos keitimas

Replace the AAA backup batteries annually or when the 'LOW BATT' indicator appears on the display to ensure continuous backup functionality.

Trikčių šalinimas

ProblemaGalima priežastisSprendimas
Laikrodžio ekranas išjungtas.Maitinimo adapteris neprijungtas arba išsijungėtage.Įsitikinkite, kad maitinimo adapteris yra tvirtai prijungtas. Patikrinkite maitinimo lizdą. Jei maitinimas išsijungiatage, display will return when power is restored (time maintained by backup batteries).
Signalizacija neskamba.Alarm not set, alarm volume too low (for radio), or alarm mode incorrect.Verify alarm time and mode (Buzzer/Radio) are set correctly. Increase radio volume if alarm is set to radio.
Prastas FM radijo priėmimas.Antena nėra ištiesta arba silpnas signalo lygis.Visiškai ištieskite FM laidinę anteną ir pakeiskite jos padėtį, kad būtų geresnis priėmimas. Pabandykite automatiškai ieškoti stočių.
USB įkrovimas neveikia.Įrenginys nesuderinamas arba laidas sugedęs.Ensure your device is compatible with 1A USB charging. Try a different USB cable.
Display is too bright.Dimmer setting is on bright.Tap the SNOOZE/DISPLAY DIMMER area on top of the unit to switch to the dim setting.

Specifikacijos

Garantija ir palaikymas

This Timex product is manufactured by SDI Technologies, Inc. and comes with a limited warranty. For technical support or warranty inquiries, please contact:

Prašome išsaugoti pirkimo įrodymą garantiniam aptarnavimui.