NICREW vieno kanalo LED šviesos laikmatis Pro naudojimo instrukcija

1. Produktas baigtasview

The NICREW Single Channel LED Light Timer Pro is a digital dimmer designed to control 16-30VDC LED lights. It offers three operating modes, including ramp-up/dim-down functions, and supports up to six programmable time points for creating custom lighting cycles. The device features an internal memory to retain settings during power outages.

Image 1: The NICREW Single Channel LED Light Timer Pro, showing the main unit with its input and output cables.

Image 2: A hand holding the compact NICREW Single Channel LED Light Timer Pro, illustrating its size and button layout.

Image 3: The product packaging for the NICREW Single Channel LED Light Timer Pro, displaying the timer unit and included DC plug adapters.

2. Sąranka ir diegimas

2.1 Suderinamumas

This timer is compatible with 16-30VDC LED lights only. It supports up to 4A (maximum 96 watts at 24VDC) and uses standard 2.5mm x 5.5mm or 2.1mm x 5.5mm barrel connectors. Please verify your LED lighting manufacturer's specifications for compatibility.

Image 4: DC Plug Adapters (A: 2.5mm female to 2.1mm male, B: 2.1mm female to 2.5mm male) for ensuring compatibility with various barrel plug sizes.

2.2 Ryšys

1. Connect your LED light to the male DC jack on the timer.
2. Connect your power transformer to the female DC plug on the timer.

Image 5: Diagram illustrating the connection process for 2.1mm x 5.5mm and 2.5mm x 5.5mm barrel plugs, including the use of DC plug adapters.

2.3 First Time Setup / Reset

To reset the timer for the first time or after a power cycle, press the NUSTATYTI mygtukas (krumpliaračio piktograma) ir GALIA button (power icon) simultaneously. Hold them down for 3 seconds until the display resets.

3. Naudojimo instrukcijos

3.1 Dabartinio laiko nustatymas

1. Paspauskite ir palaikykite NUSTATYTI button (gear icon) for 3 seconds. The hour digits will begin to flash.
2. Paspauskite HOUR + mygtuką, norėdami reguliuoti valandas.
3. Paspauskite MINUTE - mygtuką, kad nustatytumėte minutes.
4. Paspauskite NUSTATYTI dar kartą, kad patvirtintumėte laiką.

3.2 Choosing an Operating Mode (F1-F3)

The timer offers three modes:

• F1: Straight ON/OFF Mode - Simple on/off functionality without dimming.
• F2: Ramp Mode (15 minutes ramp/dim) - Gradual increase or decrease in light intensity over 15 minutes.
• F3: Ramp Mode (30 minutes ramp/dim) - Gradual increase or decrease in light intensity over 30 minutes.

Norėdami pasirinkti režimą:

1. After setting the current time, press the NUSTATYTI button (gear icon) again. The display will show 'F1', 'F2', or 'F3'.
2. Naudokite HOUR + or MINUTE - buttons to cycle through the modes.
3. Paspauskite NUSTATYTI kad patvirtintumėte savo pasirinkimą.

3.3 Programming Time Points (L-01 to L-06)

The timer supports up to 6 separate programming time points (L-01 to L-06) to create custom dawn and dusk effects.

1. After selecting the operating mode, press NUSTATYTI. The display will briefly show 'L-01' and then flash '--:--'.
2. Paspauskite GALIA button (power icon) to activate the L-01 time point.
3. Naudokite HOUR + ir MINUTE - buttons to set your desired time for L-01.
4. Paspauskite NUSTATYTI again to set the light intensity for L-01. The display will show 'L.000' (or similar, indicating intensity).
5. Naudokite HOUR + or MINUTE - buttons to set the desired light intensity (from 1% to 100%).
6. Paspauskite NUSTATYTI to move to the next time point (L-02). Repeat steps 2-5 for L-02, L-03, and L-04.
7. To skip L-05 and L-06, simply press NUSTATYTI repeatedly until the display returns to the current time.

Image 6: A graph illustrating a programming example for the F2 Ramp Mode, showing light intensity changes over six time points throughout the day.

3.4 Manual On/Off

To manually turn the light on or off, press the GALIA button (power icon). When the light is manually turned off, the display will show 'OFF'.

3.5 Adjusting Light Intensity (Manual Mode Only)

When the light is manually turned on (display shows 'ON'), you can adjust its intensity:

1. Paspauskite HOUR + or MINUTE - buttons to directly set the brightness level.
2. Paspauskite NUSTATYTI button (gear icon) to exit the intensity setting and resume the normal lighting cycle.

4. Priežiūra

To ensure optimal performance and longevity of your NICREW Single Channel LED Light Timer Pro, keep the device clean and dry. Avoid exposing it to excessive moisture or extreme temperatures. Regularly check connections to ensure they are secure.

5. Specifikacijos

6. Problemų sprendimas

• Display shows '8.8:8.8' or is unresponsive: This may indicate a need for a reset. Perform the First Time Setup / Reset procedure by pressing NUSTATYTI ir GALIA vienu metu 3 sekundes.
• Light not turning on/off or dimming as programmed: Verify that the correct operating mode (F1, F2, or F3) is selected and that all time points (L-01 to L-06) are programmed correctly. Ensure the timer is not in manual ON/OFF mode.
• Incompatibility with LED light: Confirm that your LED light operates within the 16-30VDC range and uses a standard 2.5mm or 2.1mm barrel connector. Use the provided DC plug adapters if necessary.
• Nustatymai prarasti išjungus maitinimątage: The timer features internal memory to store pre-programmed settings. If settings are lost, ensure the device is properly connected and re-program if needed.

7. Garantija ir palaikymas

The NICREW Single Channel LED Light Timer Pro comes with a hassle-free 12-month warranty. For any product inquiries, technical assistance, or warranty claims, please contact NICREW customer service. We are committed to providing 24-hour friendly customer service to ensure your satisfaction.