Astralpool NA6888

NA6888 reguliatoriaus-valdiklio-ekrano naudotojo vadovas

Model: NA6888 | Brand: AstralPool

1. Įvadas

The AstralPool NA6888 is a sophisticated regulator, controller, and display unit designed for integration with AstralPool heat pump systems. This device provides essential control and monitoring functionalities for your heat pump, ensuring efficient and reliable operation. Please note that this unit is not compatible with remote control systems.

This manual provides detailed instructions for the proper installation, operation, and maintenance of your NA6888 unit. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

2. Saugos informacija

Visada laikykitės šių saugos nurodymų, kad išvengtumėte sužalojimų ar įrenginio pažeidimo:

  • Elektros sauga: This unit operates on 220V AC. All electrical connections must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before any installation or maintenance work.
  • Aplinkos apsauga: The NA6888 unit has an IP65 protection rating, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, avoid direct high-pressure water jets or submersion.
  • Tinkamas naudojimas: Use the device only for its intended purpose as a regulator, controller, and display for AstralPool heat pumps. Do not attempt to modify the unit.
  • Tvarkymas: Handle the unit with care to avoid physical damage.

3. Produkto ypatybės

The NA6888 unit offers a range of features for comprehensive heat pump management:

  • Integruotas valdymas: Combines regulation, control, and display functions in a single compact unit.
  • Jutiklio įėjimai: Supports dedicated inputs for a Temperature Sensor (T1) and a Defrost Sensor (T2).
  • Signalizacijos įėjimai: Features three external alarm signal inputs (S1, S2, S3) for enhanced system monitoring.
  • Išvesties valdymas: Provides control outputs for key heat pump components including Water Pump, Fan, Valve, and Compressor.
  • Patvarus dizainas: IP65 rated enclosure for protection against dust and water splashes.
Priekyje view of the NA6888 controller display

3.1 pav.: priekis view of the NA6888 controller display, showing the digital readout and control buttons.

4. Pakuotės turinys

Atidarius pakuotę, patikrinkite, ar yra visi šie komponentai:

  • 1x NA6888 Regulator-Controller-Display Unit
  • 1x Wiring Harness/Cables
  • 2x tvirtinimo spaustukai
Bundled wiring harness for the NA6888 controller

Figure 4.1: Included wiring harness.

Two black plastic mounting clips for the NA6888 controller

Figure 4.2: Mounting clips.

5. Sąranka ir diegimas

Installation of the NA6888 unit requires careful attention to electrical connections. It is strongly recommended that installation be performed by a qualified and licensed professional.

5.1. Įrenginio montavimas

  1. Identify a suitable location for the controller, ensuring it is protected from direct sunlight, extreme temperatures, and excessive vibration.
  2. Cut an appropriate opening in the mounting panel or enclosure, matching the dimensions of the NA6888 unit.
  3. Insert the NA6888 unit into the opening from the front.
  4. Secure the unit in place using the provided mounting clips on the sides, ensuring a snug fit.

5.2. Laidų jungtys

Refer to the wiring diagram printed on the back of the NA6888 unit for precise connection points. Ensure all connections are secure and correctly polarized.

Atgal view of the NA6888 controller showing the wiring diagram and terminal connections

Figure 5.1: NA6888 Wiring Diagram.

Terminalo aprašymai:

TerminalasAprašymasPastabos
T1Temperatūros jutiklisConnect the main temperature sensor (NTC=5kΩ/25°C).
T2Atšildymo jutiklisConnect the defrost sensor.
S1, S2, S3External Alarm SignalsInputs for external alarm triggers.
1, 2Maitinimo įvestisConnect to 220V AC power supply.
6, 7Water Pump OutputControl output for the water pump.
8, 9Ventiliatoriaus išėjimasControl output for the fan.
10, 11Vožtuvo išėjimasControl output for the valve.
11, 12Kompresoriaus išėjimasControl output for the compressor. Note shared terminal 11 with Valve.

After all connections are made, double-check the wiring against the diagram to prevent damage to the unit or connected components.

6. Naudojimo instrukcijos

Once installed and powered on, the NA6888 display will illuminate, showing current system parameters. The unit features several buttons for navigation and setting adjustments:

  • Aukštyn (^) Mygtukas: Used to increase values or navigate up through menu options.
  • žemyn (v) Mygtukas: Used to decrease values or navigate down through menu options.
  • SET mygtukas: Used to enter a menu, confirm a selection, or save a setting.
  • M (meniu) mygtukas: Used to access the main menu or exit a sub-menu.

6.1. Pagrindinė operacija

  1. Maitinimas: Ensure the unit is correctly wired and power is supplied. The display will show the current temperature or system status.
  2. Viewing parametrai: Use the Up/Down buttons to cycle through various displayed parameters (e.g., temperature readings from T1/T2, set points, operational status).
  3. Nustatymų reguliavimas:
    1. Paspauskite NUSTATYTI button to enter the setting mode for the currently displayed parameter, or press the M mygtuką, kad pasiektumėte pagrindinį meniu.
    2. Use the Up/Down buttons to adjust the value.
    3. Paspauskite NUSTATYTI dar kartą, kad patvirtintumėte ir išsaugotumėte naują reikšmę.
    4. Paspauskite M to exit the menu or setting mode.

For detailed programming and advanced settings, refer to the specific programming guide for your AstralPool heat pump model, as the NA6888 acts as the interface for these settings.

7. Priežiūra

The NA6888 unit is designed for low maintenance. Regular checks can help ensure its longevity and proper function:

  • Valymas: Periodically wipe the display and casing su minkštu, damp šluoste. Nenaudokite abrazyvinių valiklių ar tirpiklių. Įsitikinkite, kad į įrenginį nepatenka skysčio.
  • Ryšio patikrinimas: Annually, or if issues arise, have a qualified technician check all electrical connections for tightness and signs of corrosion.
  • Aplinkos sąlygos: Ensure the unit remains within its specified operating environment (temperature, humidity) and that its IP65 rating is not compromised by physical damage.

8. Problemų sprendimas

If you encounter issues with your NA6888 unit, consider the following common troubleshooting steps. For complex problems, always consult a qualified technician.

ProblemaGalima priežastisSprendimas
Ekranas tuščiasNo power supply; Loose connection; Unit failure.Check power source (220V AC). Verify wiring connections. If power is present and connections are secure, the unit may require replacement.
Neteisingas temperatūros rodmuoFaulty sensor (T1 or T2); Loose sensor connection.Check sensor wiring. Test sensor resistance (NTC=5kΩ/25°C). Replace sensor if faulty.
Outputs (Pump, Fan, etc.) not activatingIncorrect settings; Wiring issue; Component failure.Verify controller settings. Check wiring to the respective component. Test the component itself.
External alarm not registeringIncorrect wiring to S1/S2/S3; Faulty external alarm device.Check wiring to alarm inputs. Test the external alarm device.

If troubleshooting steps do not resolve the issue, contact AstralPool customer support or a certified service technician. Information regarding spare parts availability is not provided.

9. Specifikacijos

ParametrasVertė
Modelio numerisNA6888
Prekės ženklasAstralPool
Maitinimo šaltinis220V AC, 2A max
Temperatūros jutiklio įėjimasT1 (NTC=5kΩ/25°C)
Defrost Sensor InputT2
Išoriniai signalizacijos įėjimaiS1, S2, S3
Valdymo išėjimaiWater Pump, Fan, Valve, Compressor
Apsaugos įvertinimasIP65
Diegimo kategorijaCAT II
ASINB07XGCN44T
Pirmoji laisva data21 m. birželio 2021 d

10. Garantija ir palaikymas

Specific warranty terms for the NA6888 unit are typically provided at the point of purchase or can be obtained directly from AstralPool. Please retain your proof of purchase for warranty claims.

For technical support, service, or inquiries regarding spare parts, please contact AstralPool customer service or your authorized dealer. Contact information can usually be found on the AstralPool official websvetainėje arba pirkimo dokumentuose.

© 2023 AstralPool. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.