„EJEAS V6 Pro“ motociklo šalmo „Bluetooth“ ausinių naudojimo instrukcija

1. Įvadas

The EJEAS V6 Pro is a Bluetooth communication system designed for motorcycle helmets, enabling two-way intercom communication, mobile phone connectivity, music playback, and GPS navigation audio. This manual provides detailed instructions for installation, operation, and maintenance of your device.

Image: Two EJEAS V6 Pro units, showing the main module, microphone, and speakers.

2. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• EJEAS V6 Pro Bluetooth Intercom Unit(s)
• Headphone Velcro pads
• Įkrovimo laidas (-ai)
• Mounting Clip(s)
• Screws and Allen wrench
• Earphone/Microphone Set(s)
• Vartotojo vadovas

Image: A complete set of EJEAS V6 Pro package contents, including two main units, headphones, microphones, charging cables, and mounting accessories.

3. Produkto ypatybės

• Bluetooth ryšys: Bluetooth 4.0 for stable connection with mobile devices.
• Intercom sistema: Supports 2-way full-duplex communication for up to 6 riders, with any 2 riders able to talk simultaneously. Maximum intercom range of 1200 meters in open line of sight.
• Ilgas baterijos veikimo laikas: 850mAh rechargeable battery provides up to 12 hours of intercom talk time, 18 hours of music listening, and 360 hours of standby time.
• Triukšmo slopinimas: Advanced DSP noise cancelling technology reduces wind, engine, and ambient noise for clear audio.
• Atsparumas vandeniui: IP65 rated for water and dust resistance, suitable for light rain conditions. Note: Not designed for immersion in water.
• Telefono funkcijos: Automatic answering of phone calls (after 5 seconds), manual hang-up/rejection, last number redial.
• Medijos funkcijos: Listen to GPS navigation, music playback, volume control, track switching.

Image: Visual representation of key product features such as Bluetooth connectivity, intercom range, and battery life.

4. Valdikliai ir indikatoriai

The EJEAS V6 Pro unit features several buttons and an indicator light for various functions:

• Intercom (Power/A) Button: Used for power on/off, initiating intercom, and speaking to the 1st sub-unit.
• Telefono mygtukas: Used for answering/ending calls, playing/pausing music, and redialing.
• Garsumo + mygtukas: Increases volume, long-press for previous track.
• Garsumo mygtukas: Decreases volume, long-press for next track.
• Mygtukas B: Used for speaking to the 2nd sub-unit.
• Mygtukas C: Used for speaking to the 3rd sub-unit.
• Mygtukas D: Used for speaking to the 4th sub-unit.
• Mygtukas E: Used for speaking to the 5th sub-unit.
• Indikatoriaus lemputė: Displays device status (e.g., blue for power on, red/blue flashing for pairing mode).

Vaizdas: Išsamus view of the EJEAS V6 Pro unit highlighting the function of each button and the indicator light.

5. Sąranka ir diegimas

5.1 Attaching the Earphone/Microphone Set

1. Connect the earphone/microphone jack into the corresponding port on the V6 Pro unit.
2. Attach the speaker pads to the inside of your helmet using the provided Velcro. Ensure speakers are positioned directly over your ears for optimal audio.
3. Secure the microphone in front of your mouth, ensuring it is close but not touching.

5.2 Mounting the V6 Pro Unit to Your Helmet

The V6 Pro unit can be mounted using either the plastic clip or the metal clip for enhanced durability.

1. Pasirinkite tinkamą vietą šalmo šone.
2. Attach the chosen mounting clip to the helmet. The metal clip offers a more secure and durable attachment.
3. Slide the V6 Pro unit onto the mounted clip until it clicks securely into place.

Image: An EJEAS V6 Pro unit securely mounted on the side of a motorcycle helmet.

6. Naudojimo instrukcijos

6.1 Maitinimo įjungimas/išjungimas

• Maitinimas: Short-press the Intercom (Power/A) button. The indicator light will flash blue.
• Išjungti: Long-press the Intercom (Power/A) button until the indicator light turns off.

6.2 „Bluetooth“ susiejimas su mobiliuoju telefonu

1. Ensure the V6 Pro is powered off.
2. Long-press the Phone button until the indicator light flashes red and blue alternately. This indicates pairing mode.
3. Mobiliajame telefone įjunkite „Bluetooth“ ir ieškokite galimų įrenginių.
4. Select "V6" or "EJEAS V6 Pro" from the list to connect. The indicator light on the V6 Pro will flash blue when successfully paired.

6.3 Muzikos atkūrimas

• Leisti / pristabdyti: Short-press the Phone button.
• Pagarsink: Short-press the Volume + button.
• Patildyti: Short-press the Volume - button.
• Kitas takelis: Long-press the Volume - button.
• Ankstesnis takelis: Long-press the Volume + button.

6.4 Phone Call Management

• Atsiliepti į skambutį: The V6 Pro will automatically answer incoming calls after 5 seconds.
• Baigti skambutį: Short-press the Phone button.
• Atmesti skambutį: Long-press the Phone button for 3 seconds.
• Perrink paskutinį numerį: Long-press the Phone button for 3 seconds when not on a call.

6.5 Intercom Pairing (Multiple Units)

The V6 Pro supports pairing with up to 5 other units (total 6 riders). One unit acts as the 'master' and can communicate with any of the 'sub-units'.

1. Ensure all V6 Pro units are powered off.
2. On all units, long-press the Intercom (Power/A) button until the indicator lights flash red and blue alternately.
3. Choose one unit to be the 'master'. On the master unit, short-press the Intercom (Power/A) button to start searching for other units.
4. Wait for 5-10 seconds. When the master and a sub-unit are flashing blue at the same rate, pairing is successful.
5. To pair additional units, repeat steps 2-4, using the master unit to initiate pairing with each new sub-unit by pressing the corresponding button (B, C, D, E) on the master unit.

6.6 Domofono ryšys

• After successful pairing, short-press the Intercom (Power/A) button on the master unit to enter intercom mode.
• To switch communication to a specific sub-unit, short-press the corresponding button (A, B, C, D, E) on the master unit.
• Only two machines can speak at the same time. All communication switching must be done by the master unit.

6.7 Reconnecting Intercom Units

To reconnect previously paired units:

1. Power on all V6 Pro units by short-pressing the Intercom (Power/A) button.
2. On the master unit, short-press the Intercom (Power/A) button to re-establish the intercom connection.
3. For multiple units, short-press the corresponding button (A, B, C, D, E) on the master unit to reconnect each sub-unit.

6.8 Reset (Clear Pairing Records)

To clear all pairing records from a V6 Pro unit:

1. Įsitikinkite, kad „V6 Pro“ įrenginys įjungtas.
2. Press the Phone button and Button B simultaneously.
3. The indicator light will flash red twice and then blue once, confirming that pairing records have been removed.

7. Priežiūra

• Valymas: Nuvalykite įrenginį minkštu, damp audinys. Nenaudokite stiprių cheminių medžiagų ar tirpiklių.
• Įkrovimas: Charge the device fully before first use and after prolonged storage. Use the provided charging cable. Charging time is approximately 3.5 hours.
• Saugykla: Nenaudojamą prietaisą laikykite vėsioje, sausoje vietoje.
• Atsparumas vandeniui: While water-resistant (IP65), avoid immersing the unit in water or prolonged exposure to heavy rain.

8. Problemų sprendimas

• Nėra galios: Įsitikinkite, kad akumuliatorius įkrautas. Prijunkite prie maitinimo šaltinio ir bandykite dar kartą.
• Nepavyksta susieti su telefonu: Ensure the V6 Pro is in pairing mode (red and blue flashing light). Clear previous pairing records on both the V6 Pro and your phone, then try pairing again.
• Domofonas neprisijungia: Ensure all units are powered on and in pairing mode (red and blue flashing) before initiating master pairing. If issues persist, clear pairing records on all units and re-pair.
• Prasta garso kokybė: Check microphone and speaker placement inside the helmet. Ensure the microphone is close to your mouth and speakers are aligned with your ears. Verify volume settings on both the V6 Pro and your connected device.
• Pertraukiamas ryšys: Ensure units are within the specified range and there are no significant obstacles. Avoid strong electromagnetic interference.

9. Specifikacijos

10. Garantija ir palaikymas

For any issues or questions regarding your EJEAS Motorcycle Bluetooth Headset, please contact customer support. The manufacturer offers support and will reply within 12 hours.

Dėl konkrečios garantijos informacijos žr. pirkimo dokumentus.