Marcato Ravioli Maker Mould Instruction Manual

Įvadas

Thank you for choosing the Marcato Ravioli Maker Mould. This manual provides essential information for the proper setup, operation, and maintenance of your ravioli mould. Designed to create 24 two-inch square raviolis at once, this tool simplifies homemade pasta preparation. Please read these instructions carefully before first use to ensure optimal performance and longevity of your product.

Įtraukti komponentai

The Marcato Ravioli Maker Mould package includes the following items:

• 1 x Ravioli Mould (Die-cast aluminum body)
• 1 x Wooden Rolling Pin (Solid wood)

Image: The Marcato Ravioli Maker Mould, showing the aluminum mould with 24 square cavities and the accompanying wooden rolling pin.

Sąranka

1. Išpakuokite komponentus: Carefully remove the ravioli mould and rolling pin from their packaging.
2. Pradinis valymas: Before first use, wipe the aluminum mould and wooden rolling pin with a damp cloth. Ensure all components are dry before proceeding. Do not immerse the mould in water or wash in a dishwasher.
3. Prepare Work Surface: Place the ravioli mould on a clean, flat, and stable work surface.

Naudojimo instrukcijos

Follow these steps to create homemade ravioli:

1. Prepare Pasta Dough: Roll out your pasta dough into thin sheets. The dough should be thin enough to form around the mould cavities but strong enough not to tear. You can use a pasta machine or roll by hand.
2. First Dough Layer: Lightly flour the ravioli mould. Carefully drape one sheet of pasta dough over the mould, ensuring it covers all the cavities. Gently press the dough into the cavities to form small wells.
3. Pridėti užpildą: Spoon your desired ravioli filling into each well. Do not overfill, as this can make sealing difficult.
4. Second Dough Layer: Place a second sheet of pasta dough over the filled cavities, covering the entire mould.
5. Seal and Cut: Using the provided wooden rolling pin, roll firmly and evenly across the top of the dough-covered mould. Apply consistent pressure to seal the two pasta layers together and cut the individual raviolis along the fluted edges.
6. Remove Raviolis: Carefully invert the mould to release the formed raviolis. If any stick, gently tap the mould or use a small, non-sharp utensil to dislodge them.
7. Cook or Store: Your fresh raviolis are now ready to be cooked or stored according to your recipe.

Priežiūra ir priežiūra

Proper care ensures the longevity of your Marcato Ravioli Maker Mould:

• Valymas: After use, allow the mould to sit for a few hours to let any remaining dough residue dry. Once dry, clean off the residue with a dry cleaning brush.
• DO NOT Dishwash: The ravioli mould is ne dishwasher safe. Washing in a dishwasher can damage the aluminum and wood components.
• Venkite panardinimo į vandenį: Do not immerse the mould in water. Use a damp cloth for wiping if necessary, but ensure it is thoroughly dried immediately.
• Saugykla: Store the mould and rolling pin in a dry place to prevent corrosion or damage to the wood.

Trikčių šalinimas

Gaminio specifikacijos

Informacija apie garantiją

Marcato products are manufactured to high-quality standards. This product is covered by the manufacturer's standard warranty against defects in materials and workmanship. Please refer to the official Marcato website or contact customer support for specific warranty terms and conditions applicable to your region.

Pagalba klientams

For any questions, assistance, or to report issues with your Marcato Ravioli Maker Mould, please contact Marcato customer support. Contact details can typically be found on the official Marcato websvetainėje arba ant produkto pakuotės.

Websvetainė: www.marcato.it (Patikrinkite savo regiono websvetainė)