1. Produktas baigtasview
The Total TWP47506 750W Automatic Jet Water Pump is designed for efficient clean water collection and distribution. It is suitable for drawing water from wells, boreholes, open tanks, and other water supply sources. Primary applications include watering vegetable gardens, personal plots, and ensuring water circulation in fountains and various water features. Its design prioritizes ease of maintenance and portability, featuring an external tank location. The pump incorporates a brushless induction motor for long-lasting, maintenance-free operation. The robust cast iron pump casing can be rotated 90 degrees for flexible installation. This pump is capable of integration into automated water supply systems.
1 paveikslas: Total TWP47506 750W Automatic Jet Water Pump. This image shows the complete pump unit with its motor and casing.
2. Saugos instrukcijos
Read all safety warnings and instructions carefully before operating this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
Bendra sauga
- Visada dėvėkite tinkamas asmenines apsaugos priemones (AAP), pvz., apsauginius akinius ir pirštines.
- Įsitikinkite, kad siurblys pastatytas ant stabilaus, lygaus paviršiaus, kad neapvirstų.
- Laikykite vaikus ir neįgaliotus asmenis atokiau nuo darbo zonos.
- Nenaudokite siurblio sprogioje aplinkoje, pavyzdžiui, kai yra degių skysčių, dujų ar dulkių.
- Never use the pump to transfer flammable, corrosive, or explosive liquids.
- Disconnect the power supply before performing any maintenance, cleaning, or when the pump is not in use.
Elektros sauga
- Užtikrinkite maitinimo šaltinio ttage matches the specifications on the pump's rating label (220-240V, 50Hz).
- Use a properly grounded outlet. Do not modify the plug.
- Do not expose the pump or electrical connections to rain or wet conditions.
- Avoid using extension cords unless absolutely necessary. If an extension cord is used, ensure it is rated for outdoor use and has the correct gauge for the pump's power requirements.
- Never carry the pump by its power cord.
- Regularly inspect the power cord for damage. If damaged, have it replaced by a qualified electrician.
3. Pakuotės turinys
Išpakuodami patikrinkite, ar yra visi toliau išvardyti daiktai ir ar jie nepažeisti:
- 1 x Total TWP47506 750W Automatic Jet Water Pump
- 1 x slėgio jungiklis
- 1 x Stainless Steel Hose
- 1x slėgio matuoklis
- 1 x Three-way Brass Fitting
- Vartotojo vadovas (šis dokumentas)
4. Techninės specifikacijos
| Specifikacija | Vertė |
|---|---|
| Modelio numeris | TWP47506 |
| Tipas | Self-priming Automatic Jet Pump |
| Nominali galia | 750 W (1.0 AG) |
| ttage | 220-240V |
| Dažnis | 50 Hz |
| Max galva | 45 metrų |
| Maksimalus srautas | 60 litrai per minutę |
| Maksimalus išsiurbimas | 9 metrų |
| Vamzdžio skersmuo | 1x1 colių |
| Variklio tipas | Copper Wire Induction Motor (Brushless) |
| Sparnuotės medžiaga | Nerūdijantis plienas |
| C siurblysasing Medžiaga | Ketaus |
| Kabelio ilgis | 0.3 metrų |
| Tank Capacity (Cylindrical) | 24 litro |
| Gaminio matmenys (I x P x A) | 30 x 19 x 22 cm |
| Prekės svoris | 1.5 kg |
| Spalva | Sidabras |
5. Sąranka ir diegimas
5.1 Įdėjimas
- Position the pump on a firm, level, and dry surface.
- Užtikrinkite tinkamą ventiliaciją aplink siurblį, kad jis neperkaistų.
- Protect the pump from direct exposure to weather elements (rain, direct sunlight, frost).
- Keep the pump as close as possible to the water source to minimize suction lift and maximize efficiency.
5.2 Vamzdžių sujungimas
The pump is equipped with standard inch fittings for both suction and discharge pipes.
- Siurbimo vamzdis: Connect a rigid, airtight suction pipe (1 inch diameter) to the pump's inlet. Ensure all connections are sealed to prevent air leaks, which can affect priming and pump performance. A foot valve with a strainer should be installed at the end of the suction pipe submerged in the water source to prevent debris from entering the pump and to maintain prime.
- Išleidimo vamzdis: Connect a discharge pipe (1 inch diameter) to the pump's outlet. Use the provided three-way brass fitting, pressure switch, and pressure gauge as part of your water supply system. Ensure all connections are secure.
5.3 Siurblio užpildymas
This is a self-priming pump, but initial priming is crucial for proper operation. Before first use or after the pump has run dry:
- Ensure the suction pipe is fully submerged in the water source.
- Locate the priming plug on the top of the pump casing.
- Unscrew the priming plug and slowly fill the pump casinpilkite švariu vandeniu, kol jis perbėgs per kraštus.
- Replace and securely tighten the priming plug.
- Open any valves on the discharge side to allow air to escape during startup.
5.4 Elektros prijungimas
- Connect the pump's power cord to a grounded electrical outlet (220-240V, 50Hz).
- Ensure the electrical circuit is protected by a Residual Current Device (RCD) for added safety.
6. Operacija
6.1 Siurblio paleidimas
- Ensure the pump has been properly primed (Section 5.3).
- Verify all pipe connections are secure and leak-free.
- Plug the pump into the power outlet. The pump will start automatically if connected to an automated system with a pressure switch.
- Observe the pressure gauge. The pressure should rise as the pump builds pressure.
- If the pump does not draw water within a few minutes, switch it off, re-prime, and check for air leaks in the suction line.
6.2 Automatinis veikimas
When integrated into a water supply system with the included pressure switch, the pump will automatically start when water pressure drops (e.g., when a tap is opened) and stop when the desired pressure is reached (e.g., when the tap is closed). The 24-liter cylindrical tank helps maintain consistent pressure and reduces pump cycling.
6.3 Siurblio sustabdymas
For temporary shutdown, close all water outlets. The pump will stop automatically if operating in an automated system. For complete shutdown or extended periods of non-use, unplug the pump from the power supply.
7. Priežiūra
Regular maintenance ensures optimal performance and extends the lifespan of your pump. Always disconnect the power supply before performing any maintenance.
7.1 Reguliarūs patikrinimai
- Patikrinkite, ar maitinimo laidas ir kištukas nėra pažeisti.
- Check all pipe connections for leaks. Tighten if necessary.
- Ensure the foot valve strainer is clear of debris. Clean if clogged.
- Listen for unusual noises during operation, which may indicate a problem.
7.2 Valymas
Nuvalykite siurblio išorę skelbimuamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the motor's ventilation openings are free from dust and debris.
7.3 Pasiruošimas žiemai (šaltam klimatui)
If the pump is exposed to freezing temperatures, it must be drained to prevent damage:
- Atjunkite maitinimo šaltinį.
- Drain all water from the pump casing by unscrewing the drain plug (if present) or by tilting the pump.
- Disconnect the suction and discharge pipes and drain them completely.
- Siurblį laikykite sausoje, nuo šalčio apsaugotoje vietoje.
8. Problemų sprendimas
Prieš kreipdamiesi į klientų aptarnavimo tarnybą, žr. toliau pateiktą lentelę, kurioje pateikiamos dažniausiai kylančios problemos ir jų sprendimai.
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Siurblys neįsijungia | Nėra maitinimo Sugedęs maitinimo laidas / kištukas Suveikė variklio perkrovos apsauga |
Patikrinkite maitinimo jungtį ir lizdą Patikrinkite ir pakeiskite, jei pažeista Allow motor to cool, then restart. Check for blockages. |
| Siurblys veikia, bet vanduo netiekiamas | Siurblys nėra gruntuotas Oro nuotėkis įsiurbimo linijoje Per didelis siurbimo pakilimas Kojinis vožtuvas užsikimšęs arba užstrigęs Vandens šaltinis tuščias |
Re-prime the pump (Section 5.3) Patikrinkite visas siurbimo jungtis, ar nėra nuotėkių, ir priveržkite Perkelkite siurblį arčiau vandens šaltinio Išvalykite arba pakeiskite kojinį vožtuvą Ensure adequate water in source |
| Mažas srautas arba slėgis | Partial blockage in pipes/impeller Oro nuotėkis įsiurbimo linijoje Susidėvėjęs sparnuotė Incorrect pressure switch setting |
Inspect and clear blockages Check and seal suction connections Susisiekite su kvalifikuotu techninės priežiūros personalu Adjust pressure switch according to manufacturer guidelines (if adjustable) |
| Siurblys dažnai įsijungia ir išsijungia | Leak in discharge system Pressure tank pre-charge incorrect Sugedęs slėgio jungiklis |
Check for leaks in pipes, fittings, or fixtures Check and adjust pressure tank air pre-charge Inspect and replace pressure switch if necessary |
9. Garantija ir palaikymas
This Total TWP47506 750W Automatic Jet Water Pump comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, spare parts, or warranty claims, please contact Total customer support through your retailer or visit the official Total website for contact information in your region. When contacting support, please have your model number (TWP47506) and purchase date available.