TICCI T8VB Vibrating Alarm Watch User Manual

Įvadas

This manual provides comprehensive instructions for the setup, operation, and maintenance of your TICCI T8VB Vibrating Alarm Watch. Designed for clear readability and ease of use, this watch features multiple vibrating alarms, a large digital display, and water resistance, making it ideal for medication reminders, task management, and daily timekeeping.

Saugos informacija

• The watch is water-resistant up to 50 meters. However, avoid exposure to hot water (e.g., hot showers, saunas) as this can compromise the water resistance seals.
• Nebandykite atidaryti laikrodžio c.asing unless performing a battery replacement as instructed. Improper handling may damage the internal components and void the warranty.
• Keep the watch away from strong magnetic fields to prevent interference with timekeeping accuracy.

Produktas baigtasview

The TICCI T8VB watch features a large digital display and four control buttons. Refer to the diagrams below for button identification and display elements.

1 pav.: priekis view of the TICCI T8VB Vibrating Alarm Watch.

Figure 2: Button layout and display indicators. Detailed instructions are provided in the sections below.

Mygtukas A: Mode Selection / Backlight
Mygtukas B: Set / Adjust Up
Mygtukas C: Adjust Down / Start/Stop (Stopwatch/Countdown)
Mygtukas D: Užrakinti/Atrakinti

Sąranka

1. Initial Power On / Battery

Your watch comes with a CR2 battery pre-installed. If the display is blank or dim, the battery may need to be activated or replaced. Refer to the "Maintenance" section for battery replacement instructions.

2. Laiko ir datos nustatymas

1. From the Time Mode display, press and hold Mygtukas B for approximately 2 seconds until the hour digits begin to flash. This indicates you are in setting mode.
2. Paspauskite Mygtukas A to cycle through the settings: Hour → Minute → Year → Month → Date.
3. Naudokite Mygtukas B to increase the flashing value and Mygtukas C jį sumažinti.
4. Kai visi nustatymai bus sureguliuoti, paspauskite Mygtukas B dar kartą, kad išeitumėte iš nustatymo režimo.
5. To switch between 12-hour and 24-hour format, press Mygtukas C while the hour digits are flashing during time setting.

Naudojimo instrukcijos

1. Režimo pasirinkimas

Paspauskite Mygtukas A repeatedly to cycle through the different modes:

• Laiko režimas: Rodo dabartinį laiką, datą ir savaitės dieną.
• Aliarmo režimas: Allows setting and managing up to 8 individual alarms.
• Chronometro režimas: Laiko nustatymui skirti įvykiai.
• Atgalinės atskaitos režimas: For setting a countdown timer.

2. Setting Alarms (8 Vibrating Alarms)

The watch supports 8 independent alarms, each configurable for vibration, sound, or both.

1. Įeikite Signalizacijos režimas paspausdami Mygtukas A until "AL" appears on the display.
2. Paspauskite ir palaikykite Mygtukas B for approximately 2 seconds until the alarm number (1-8) flashes.
3. Naudokite Mygtukas A to select the alarm you wish to set (A1, A2, A3, etc.).
4. Paspauskite Mygtukas B to confirm the alarm selection and move to setting the alarm time. The hour digits will flash.
5. Naudokite Mygtukas B reguliuoti valandą ir Mygtukas C norėdami pakoreguoti minutę.
6. Nustatę laiką paspauskite Mygtukas A to select the alarm type:
   • Abu: Both sound (beep) and vibration.
   • SOUND ONLY: Only sound (beep).
   • VIBRATION ONLY: Only vibration.
7. Paspauskite Mygtukas B to save the alarm settings and exit.
8. To turn an alarm ON or OFF, in Alarm Mode, use Mygtukas A to select the alarm, then press Mygtukas C to toggle its status.

3. Atgalinis laikmatis

The countdown timer can be set from 15 minutes up to 24 hours.

1. Įeikite Atgalinės atskaitos režimas paspausdami Mygtukas A until "TR" appears on the display.
2. Paspauskite ir palaikykite Mygtukas B for approximately 2 seconds until the hour digits flash.
3. Naudokite Mygtukas B reguliuoti valandą ir Mygtukas C to adjust the minute for the countdown duration.
4. Paspauskite Mygtukas B to save the countdown setting.
5. Paspauskite Mygtukas C , kad pradėtumėte arba pristabdytumėte atgalinį skaičiavimą.
6. When the countdown reaches zero, the watch will alert with the selected alarm type (sound, vibration, or both).

4. Chronometras

1. Įeikite Chronometro režimas paspausdami Mygtukas A until "ST" appears on the display.
2. Paspauskite Mygtukas C kad įjungtų chronometrą.
3. Paspauskite Mygtukas C dar kartą, kad pristabdytumėte chronometrą.
4. Kai pristabdyta, paspauskite Mygtukas B kad iš naujo nustatytumėte chronometrą į nulį.

5. Foninis apšvietimas

Paspauskite Mygtukas A briefly in any mode to activate the super bright EL backlight for easy viewprasto apšvietimo sąlygomis.

Figure 3: Watch display with backlight activated.

6. Lockout Feature

To prevent accidental changes to settings, the watch includes a lockout feature.

• Į Užraktas the watch: Press and hold Mygtukas B ir Mygtukas C simultaneously for about 2 seconds. A "LOCK" icon will appear on the display.
• Į Atrakinti the watch: Press and hold Mygtukas B ir Mygtukas C simultaneously for about 2 seconds. The "LOCK" icon will disappear.
• When locked, only the backlight (Button A) can be activated. All other button functions are disabled.

Priežiūra

1. Atsparumas vandeniui

The TICCI T8VB watch is rated 50 meters (5 ATM) water-resistant. This means it can withstand splashes, rain, and brief immersion in water. It is suitable for continuous hand washing. However, it is nerekomenduojama for swimming, showering, or diving, especially in hot water, as steam and high temperatures can damage the watch's seals.

2. Valymas

Clean the watch and strap regularly with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials, which can damage the finish or seals.

3. Baterijos keitimas

The watch uses one CR2 battery. When the display becomes dim or functions become erratic, it's time to replace the battery. Battery replacement should ideally be performed by a qualified technician to ensure water resistance is maintained. If replacing yourself, carefully open the back cover, replace the battery with a new CR2 battery, and ensure the gasket is properly seated before securely closing the cover.

Trikčių šalinimas

• Watch not turning on or display is blank: Check battery. If recently replaced, ensure it's inserted correctly. If old, replace with a new CR2 battery.
• Alarms not sounding/vibrating: Ensure the alarm is set to ON and the correct alarm type (sound, vibration, or both) is selected. Check if the watch is in lockout mode.
• Mygtukai nereaguoja: The watch may be in lockout mode. Press and hold Mygtukas B ir Mygtukas C simultaneously for 2 seconds to unlock. If still unresponsive, try removing and reinserting the battery to perform a soft reset.
• Timekeeping inaccuracy: If the watch gains or loses significant time, a battery replacement may be needed, or it could indicate an internal issue.
• Vanduo laikrodyje: Immediately stop using the watch and seek professional service. Do not attempt to dry it with heat, as this can cause further damage.

Specifikacijos

4 pav.: Laikrodžio matmenys.

Garantija ir palaikymas

TICCI is committed to product quality and customer satisfaction. If you encounter any issues with your watch, please contact our customer support team. While specific warranty details are not provided in this manual, TICCI generally offers support for product defects. Please retain your proof of purchase for any warranty claims.

For assistance, please refer to the contact information provided with your purchase or visit the official TICCI websvetainę.