myTouchSmart 48707 Rotatable Outdoor Digital Yard Stake Timer Instruction Manual

Įvadas

This manual provides detailed instructions for the safe and efficient operation of your myTouchSmart 48707 Rotatable Outdoor Digital Yard Stake Timer. Please read this manual thoroughly before installation and use, and retain it for future reference. This device is designed to automate outdoor lighting and other electrical appliances with programmable on/off times, light-sensing technology, and multiple grounded outlets.

Svarbi saugos informacija

• Elektros smūgio pavojus: Use only with a GFCI-protected outdoor outlet. Do not immerse in water.
• Tinkamas įžeminimas: Įsitikinkite, kad laikmatis yra tinkamai įžemintas.
• Apsauga nuo perkrovos: Do not exceed the maximum electrical rating of 125V, 60 Hz, 1875W (15A) general/resistive.
• Vieta: Place the stake in a location with direct access to sunlight for optimal light sensor function. Ensure the unit is at least 1 foot above ground level to prevent waterlogging.
• Išleidimo angos dangteliai: Keep individual self-closing protective outlet covers closed when not in use to prevent moisture and debris entry.
• Laido valdymas: Route cords to prevent tripping hazards and damage.
• Priežiūra: Prieš atlikdami bet kokius techninės priežiūros ar valymo darbus, atjunkite maitinimą.

Pakuotės turinys

• myTouchSmart Rotatable Outdoor Digital Yard Stake Timer (Model 48707)
• Ground Stake (multi-section)
• Instrukcijų vadovas

Produkto savybės

• Rotatable Outlets: Six grounded outlets, three of which rotate 180 degrees for flexible access.
• Skaitmeninis laikmatis: Programmable with custom ON/OFF times.
• Šviesos jutiklis: Automatic dusk-to-dawn operation or 6-hour countdown after sunset.
• Atsparus oro sąlygoms: Durable construction with self-closing protective outlet covers.
• 10ft Cord: Provides extended reach for outdoor placement.
• Apsauga nuo perkrovos: Integrated 15A/1875W circuit breaker for safety.

Sąranka

1. Surinkite kuolą: Attach the stake sections together and then to the timer unit.
2. Vieta: Insert the assembled stake firmly into the ground in your desired outdoor location. Ensure the timer unit is at least 1 foot above ground level and has direct access to sunlight if using light-sensing features.
3. Pradinis maitinimo prijungimas: Plug the timer's power cord into a GFCI-protected outdoor outlet. If the display is blank, allow the timer to charge for at least 30 minutes to power the internal battery.
4. Iš naujo nustatykite laikmatį: Using a small, non-metallic, insulated tool (like a pencil tip or toothpick), press the RESET button located on the control panel. The LCD display will illuminate and show "12:00 AM".
5. Prijunkite įrenginius: Plug your outdoor lights or appliances into the grounded outlets. Rotate the outlets as needed for optimal cord management. Close the protective covers over unused outlets.

Naudojimo instrukcijos

1. Setting Day & Time

1. Paspauskite ir palaikykite LAIKRODIS mygtuką.
2. Laikant LAIKRODIS, paspauskite SAVAITĖ button repeatedly until the desired day of the week appears at the top of the display.
3. Laikykite toliau LAIKRODISir paspauskite VALANDA button repeatedly to set the current hour (AM/PM will adjust automatically).
4. Still holding LAIKRODIS, paspauskite MIN mygtuką kelis kartus, kad nustatytumėte dabartinę minutę.
5. Atleiskite LAIKRODIS mygtuką, kad išsaugotumėte nustatymus.

2. Programų nustatymas (ĮJUNGIMO / IŠJUNGIMO laikas)

The timer allows for two custom ON/OFF programs. Follow these steps for each program:

1. Paspauskite PROG button once. The display will show "1 ON" at the bottom left. This indicates you are setting the ON time for Program 1.
2. Paspauskite SAVAITĖ button repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or various combinations).
3. Paspauskite VALANDA mygtuką, kad nustatytumėte norimą ĮJUNGIMO valandą.
4. Paspauskite MIN mygtuką, kad nustatytumėte norimą įjungimo minutę.
5. Paspauskite PROG button again. The display will show "1 OFF". This indicates you are setting the OFF time for Program 1.
6. Repeat steps 2-4 to set the desired OFF day(s), hour, and minute for Program 1.
7. To set Program 2, press the PROG button again until "2 ON" appears, then repeat steps 2-6.
8. Nustatę visas norimas programas, paspauskite LAIKRODIS mygtuką, norėdami grįžti į pagrindinį ekraną.

To clear a program: Nors viewing the program (e.g., "1 ON" or "1 OFF"), press the R (Reset) button. Four dashes will appear, indicating the program is cleared. Press R again to reactivate it.

3. Auto/Manual Settings

To use your programmed settings, the timer must be in AUTO mode. To switch between modes:

• Paspauskite ir palaikykite VADOVAS button for 4 seconds. The display will cycle through AUTO ON, AUTO OFF, and MANUAL.
• AUTOMATINIS ĮJUNGTAS: The timer will remain ON until the next programmed OFF time.
• AUTOMATINIS IŠJUNGTAS: The timer will remain OFF until the next programmed ON time.
• VADOVAS: The timer will ignore all programmed settings and act as a simple ON/OFF switch.

4. Light Sensor Modes (Dusk-to-Dawn, Countdown)

The timer features light-sensing technology for automatic operation based on ambient light. Ensure the light sensor (located on the top of the unit) is unobstructed and receives direct sunlight for optimal performance.

• Prieblanda iki aušros: The timer will automatically turn ON at dusk and remain ON until dawn.
• Atgalinis laikmatis: The timer will turn ON at dusk and remain ON for a preset duration (e.g., 6 hours).

Refer to the specific button on your timer labeled "Sensor" or "Timer" to cycle through these modes. The product description mentions "6-Hour Countdown" and "dawn to dusk" as presets.

5. Security/Vacation Mode (Random Function)

This mode randomly adjusts your programmed ON/OFF times to give your home a lived-in appearance, deterring potential intruders. To activate this feature, you must have at least one program set for longer than 33 minutes.

1. Paspauskite SAVAITĖ ir VALANDA buttons simultaneously. "RND" will appear to the right of the display, indicating Random mode is active.
2. In this mode, programmed ON/OFF times will be randomly postponed by 2 to 32 minutes.
3. Norėdami išjungti, paspauskite SAVAITĖ ir VALANDA buttons simultaneously again. "RND" will disappear.

6. Daylight Saving Mode

To adjust the time for Daylight Saving:

1. Paspauskite VALANDA ir MIN buttons simultaneously. The time will adjust by one hour forward or backward.
2. This function must be manually enabled or disabled as needed.

Priežiūra

• Regularly inspect the timer and cord for any signs of damage, fraying, or wear.
• Keep the light sensor clean and free from debris to ensure accurate dusk/dawn detection.
• Ensure all unused outlets have their protective covers securely closed.
• Įrenginį valykite minkštu, damp audinys. Nenaudokite stiprių cheminių medžiagų ar abrazyvinių valiklių.

Trikčių šalinimas

Specifikacijos

Garantija ir palaikymas

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the myTouchSmart official websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.