Įvadas
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Faultless Ball Satin Stainless Steel Entry Knob and Single Cylinder Deadbolt. Please read these instructions carefully before installation and use to ensure proper function and longevity of your lockset.
Saugos informacija
- Always wear appropriate safety gear, such as gloves and eye protection, during installation.
- Prieš naudodami įsitikinkite, kad visi komponentai yra tvirtai pritvirtinti.
- Do not use excessive force when operating the lockset.
- Keep keys in a safe and accessible location, separate from the door.
Pakuotės turinys
Jūsų pakuotėje turėtų būti šie elementai:
- 2 x Keyed Entry Ball Knobs
- 2 x Single Cylinder Deadbolts
- 4 x KW1 Keys
- Adjustable Latches (for both knob and deadbolt)
- Smūginės plokštės
- Tvirtinimo varžtai
- Diegimo šablonas (jei pridėtas)
Image: All components of the Faultless Ball Satin Stainless Steel Entry Knob and Single Cylinder Deadbolt set, including two knobs and two deadbolts with their respective latches and strike plates.
Sąranka ir diegimas
Reikalingi įrankiai:
- „Phillips“ atsuktuvas
- Matavimo juosta
- Pieštukas
- Drill (if new door preparation is needed)
- Wood Chisel (if new door preparation is needed)
Diegimo žingsniai:
- Paruoškite duris: Ensure your door has the correct bore holes (typically 2-1/8 inches for the lock body and 1 inch for the latch) and backset (2-3/8 inches or 2-3/4 inches). Use the provided template if drilling new holes.
- Įdiekite užraktą: Insert the latch into the edge bore hole of the door. Ensure the bevel of the latch bolt faces the door frame. Secure with two small screws. Adjust the backset if necessary by twisting the latch mechanism.
- Install the Exterior Knob/Deadbolt: Place the exterior portion of the knob/deadbolt through the large bore hole, ensuring the spindle or tailpiece aligns with the latch mechanism.
- Install the Interior Knob/Deadbolt: Position the interior portion of the knob/deadbolt, aligning it with the exterior portion and the latch. Secure with the long mounting screws provided, tightening evenly.
- Įdiekite apsauginę plokštę: Mark the position of the latch bolt on the door frame. Chisel out a shallow recess for the strike plate and secure it with screws. Ensure the latch bolt engages smoothly.
- Bandomoji operacija: Close the door and test the knob and deadbolt with the key from both inside and outside to ensure smooth operation.
Naudojimo instrukcijos
Keyed Entry Knob:
- Norėdami užrakinti iš išorės: Insert the key and turn it to lock the knob. Remove the key.
- Norėdami atrakinti iš išorės: Insert the key and turn it to unlock the knob.
- Norėdami užrakinti iš vidaus: Press or turn the button/thumbturn on the interior knob.
- Norėdami atrakinti iš vidaus: Turn the interior knob or button/thumbturn.
Single Cylinder Deadbolt:
- Norėdami užrakinti iš išorės: Insert the key and turn it to extend the deadbolt. Remove the key.
- Norėdami atrakinti iš išorės: Insert the key and turn it to retract the deadbolt.
- Norėdami užrakinti iš vidaus: Turn the thumbturn on the interior side to extend the deadbolt.
- Norėdami atrakinti iš vidaus: Turn the thumbturn on the interior side to retract the deadbolt.
Priežiūra
- Valymas: Clean the lockset regularly with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the satin stainless steel finish.
- Tepimas: Periodically apply a small amount of graphite lubricant or a silicone-based spray to the keyway and latch mechanism to ensure smooth operation. Do not use oil-based lubricants as they can attract dirt.
- Varžtų tvirtumas: Check and tighten all mounting screws periodically to ensure the lockset remains securely attached to the door.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Raktas nesisuka arba sukamas sunkiai. | Dirt in keyway, worn key, or misaligned cylinder. | Clean keyway with graphite lubricant. Try a spare key. Check for proper cylinder alignment. |
| Latch bolt does not retract/extend fully. | Misaligned latch, bent components, or debris. | Check latch alignment and screw tightness. Clear any obstructions. Lubricate the latch mechanism. |
| Door does not close properly with lock engaged. | Misaligned strike plate or door frame issues. | Adjust the strike plate position. Inspect the door frame for warping or damage. |
| Knob/Deadbolt feels loose. | Atsilaisvinę tvirtinimo varžtai. | Tighten the mounting screws evenly. Do not overtighten. |
Specifikacijos
- Produkto tipas: Keyed Entry Knob and Single Cylinder Deadbolt
- Modelis: B36L1BD
- Medžiaga: Nerūdijantis plienas, metalas
- Baigti: Satinas nerūdijantis plienas
- Įvertinimas: 3 Grade (Residential)
- Durų perdavimas: Dešiniarankis
- Reguliuojamas atlošo atstumas: 2-3/8 colio (60 mm) arba 2-3/4 colio (70 mm)
- Durų storio diapazonas: 1-3/8 inches (35mm) to 1-3/4 inches (44mm)
- Raktas: KW1
- Keys Included: 4
- Gaminio matmenys: Apytiksliai 3.3 x 12.4 x 9.8 colio (8.4 x 31.5 x 24.9 cm)
- Vidaus / lauko naudojimas: Lauke
Garantija ir palaikymas
For warranty information, please refer to the documentation provided at the time of purchase or contact the retailer/manufacturer directly. Specific warranty terms may vary.
For technical support or further assistance, please contact the customer service department of your retailer or the manufacturer, Overstock.