Įvadas
This manual provides essential information for the safe and effective operation and maintenance of your DEWALT D36000S 10-Inch Wet Tile Saw with Stand. Please read and understand all instructions before use to ensure proper function and to prevent injury.
The DEWALT D36000S is a high-capacity wet tile saw designed for professional tile installation. It offers a 37-inch rip cut capacity (41 inches with plunge) and an 8-1/2 inch crosscut capacity, suitable for various tile sizes including 36x36 inch tiles ripped in half, 6-inch sills, and 8x48 inch planks at a 30% offset. The integrated water tray system helps contain mess, making it suitable for indoor use. The saw and stand are designed for portability, weighing approximately 91 lbs.
Saugos informacija
Visada laikykitės pagrindinių saugos priemonių, kad sumažintumėte gaisro, elektros smūgio ir sužalojimo riziką. Darbo vieta turi būti švari ir gerai apšviesta. Nenaudokite elektrinių įrankių sprogioje aplinkoje, pavyzdžiui, kai yra degių skysčių, dujų ar dulkių. Dirbdami su elektriniu įrankiu, laikykite vaikus ir pašalinius asmenis atokiai.
Elektros sauga
- Ensure the power cord is compatible with the power source and is properly grounded.
- Venkite kūno sąlyčio su įžemintais paviršiais, tokiais kaip vamzdžiai, radiatoriai, viryklės ir šaldytuvai.
- Saugokite elektrinius įrankius nuo lietaus ar drėgnų sąlygų. Į elektrinį įrankį patekęs vanduo padidins elektros smūgio riziką.
- Nepiktnaudžiaukite laidu. Niekada nenaudokite laido elektrinio įrankio nešimui, traukimui ar atjungimui. Laikykite laidą toliau nuo karščio, alyvos, aštrių kraštų ar judančių dalių.
Asmeninis saugumas
- Visada dėvėkite akių apsaugos priemones (apsauginius akinius arba akinius nuo saulės) ir klausos apsaugos priemones.
- Wear appropriate clothing. Do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
- Būkite budrūs, stebėkite, ką darote, ir vadovaukitės sveiku protu, kai naudojate elektrinį įrankį.
- Nepersistenkite. Visada stovėkite ant kojų ir laikykite pusiausvyrą.
Saw Specific Safety
- Always ensure the blade guard is in place and functioning correctly.
- Use only blades recommended for wet cutting of tile and masonry.
- Never attempt to cut material freehand. Always use the rip fence or miter guide.
- Ensure the water pump is submerged and functioning to provide adequate cooling and dust suppression during operation.
- Disconnect power before changing blades or performing any maintenance.
Komponentai
The DEWALT D36000S Wet Tile Saw includes the following components:
- D36000 Wet Tile Saw Unit
- D24001 Stand
- DW4764 Porcelain Tile Blade
- Povandeninis vandens siurblys
- Vandens keptuvė
- Side Water Trays
- Rear Water Trays
- Cutting Cart Side Extension
- Angle/Rip Guide
- Ašmenų veržliaraktis
- Hex veržliaraktis
Sąranka
Tinkamas nustatymas yra labai svarbus saugiam ir tiksliam veikimui.
1. Assemble the Stand
Unfold the D24001 stand and ensure all locking mechanisms are securely engaged. Place the stand on a firm, level surface.
2. Mount the Saw to the Stand
Carefully lift the D36000 saw unit and align it with the mounting points on the stand. Secure the saw to the stand using the provided hardware. Ensure the saw is stable and does not wobble.
Figure 1: Fully assembled DEWALT D36000S Wet Tile Saw on its stand.
3. Install Water Trays and Pump
Attach the water pan, side water trays, and rear water trays to the saw unit. Ensure they are properly seated to prevent leaks. Place the submersible pump into the water pan and connect its hose to the saw's water delivery system.
2 pav.: Iš viršaus į apačią view of the saw, illustrating the placement of the water trays for effective water management.
4. Install Blade
Ensure the saw is unplugged. Use the blade wrench to loosen the arbor nut. Install the DW4764 Porcelain Tile Blade, ensuring the rotation direction matches the arrow on the saw. Tighten the arbor nut securely.
5. Fill Water Reservoir
Fill the water pan with clean water until the submersible pump is fully submerged and the water level is adequate for operation. Regularly check and refill the water during use.
1 vaizdo įrašas: metimas per sekundęview of the DEWALT D36000S Wet Tile Saw with Stand, demonstrating its features and setup.
Naudojimo instrukcijos
Familiarize yourself with the saw's controls and cutting capabilities before beginning work.
1. Adjusting for Cuts
- Pjovimo pjūviai: For straight cuts along the length of the tile, use the rip fence. The saw offers a 37-inch rip cut capacity, extendable to 41 inches with plunge cuts. The 18-inch cutting clearance to the left of the blade allows for ripping 36x36 inch tiles in half.
- Crosscuts: For cuts across the width of the tile, use the miter guide. The saw has an 8-1/2 inch crosscut capacity, ideal for 6-inch sills and 8x48 inch planks at a 30% offset.
- Įstrižiniai pjūviai: Adjust the miter guide for angled cuts. The saw supports various miter angles.
Figure 3: Detail of the miter adjustment lever, allowing for precise angle settings for various cuts.
2. Performing a Cut
- Place the tile firmly against the rip fence or miter guide on the cutting cart.
- Ensure the water pump is running and water is flowing to the blade.
- Turn on the saw. Allow the blade to reach full speed before beginning the cut.
- Slowly and steadily push the cutting cart and tile through the blade. Do not force the cut.
- Maintain a firm grip on the tile throughout the cutting process.
- Once the cut is complete, turn off the saw and wait for the blade to stop before removing the tile.
Figure 4: The cutting cart lock mechanism, ensuring stability during precise cuts.
Priežiūra
Regular maintenance ensures the longevity and performance of your tile saw.
1. Valymas
- After each use, disconnect the saw from power.
- Drain the water pan using the easy-to-remove plug.
- Rinse all water trays, the cutting cart, and the blade area to remove tile slurry and debris.
- Clean the submersible pump to prevent clogging.
- Wipe down all surfaces to prevent rust and buildup.
2. Ašmenų priežiūra
- Inspect the blade for wear, damage, or dullness before each use.
- Replace worn or damaged blades promptly. Refer to the 'Install Blade' section for replacement instructions.
- Tinkamai laikykite peilius, kad išvengtumėte pažeidimų.
3. Bendra apžiūra
- Periodiškai tikrinkite visų tvirtinimo detalių sandarumą.
- Patikrinkite, ar maitinimo laidas nėra pažeistas.
- Ensure the cutting cart slides smoothly. Lubricate if necessary with a suitable lubricant.
Figure 5: Integrated storage for accessories like wrenches and the miter guide, located beneath the saw for convenience.
Trikčių šalinimas
Šiame skyriuje aptariamos dažniausiai pasitaikančios problemos, su kuriomis galite susidurti.
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Pjūklas neįsijungia | Nėra elektros, sugedęs jungiklis, suveikęs grandinės pertraukiklis | Check power connection, test outlet, reset breaker, contact service if switch is faulty. |
| Blade not cutting efficiently or chipping tiles | Dull or incorrect blade, insufficient water flow, feeding too fast | Replace blade, ensure pump is working and water is flowing, reduce feed rate. |
| Water not flowing to blade | Clogged pump, kinked hose, low water level | Clean pump, check hose for obstructions, refill water pan. |
| Netikslūs pjūviai | Loose fence/guide, worn blade, unstable setup | Tighten fence/guide, replace blade, ensure saw and stand are stable. |
Specifikacijos
Key technical specifications for the DEWALT D36000S Wet Tile Saw:
- Modelio numeris: D36000S
- Maitinimo šaltinis: Su laidu elektra
- Variklis: 15 Amp, 1220 MWO
- ttage: 120 V
- Vattage: 1800 vatų
- Greitis: 4200 aps./min
- Ašmenų skersmuo: 10 colių
- Rip Cut Capacity: 37 inches (41 inches with plunge)
- Crosscut Capacity: 8-1/2 colio
- Tikslumas: 1/32 inch over 30 inches
- Prekės svoris: 91 svaro
- Prekės matmenys (I x P x A): 36 colio ilgio x 31 colių pločio x 28.75 colio aukščio
- Ašmenų medžiaga: Stainless Steel (for included blade)
- Paviršiaus rekomendacija: Porcelianas
- Ypatingos savybės: Brake, Integrated storage, Water tray system
- Sertifikavimas: UL
Garantija ir palaikymas
Dėl garantijos informacijos, aptarnavimo ar techninės pagalbos kreipkitės į oficialią DEWALT websvetainėje arba susisiekite tiesiogiai su DEWALT klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą garantijos pretenzijoms.