Behringer TD-3-AM Analog Bass Line Synthesizer User Manual

1. Įvadas

The Behringer TD-3-AM is an analog bass line synthesizer designed to produce rich bass and groove sounds. It features a pure analog signal path, authentic circuit reproduction with matched transistors, and a versatile 4-pole resonant filter. This manual provides essential information for setting up, operating, and maintaining your TD-3-AM synthesizer.

Pagrindinės funkcijos:

• Analog Bass Line Synthesizer with true analog circuitry.
• Authentic reproduction of original circuits with matched transistors.
• Pure analog signal path based on legendary VCO, VCF, and VCA designs.
• Sawtooth and square wave VCO with transistor circuitry.
• 4-pole resonant filter with controls for cut-off, resonance, envelope, decay, and accent.
• Integrated 16-step sequencer for pattern creation.
• Built-in distortion effect.
• USB and MIDI connectivity for modern integration.

2. Saugos instrukcijos

Please read and follow these safety instructions to prevent damage to the unit and ensure your safety:

• Do not open the unit. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
• Saugokite įrenginį nuo lietaus, drėgmės ar ekstremalių temperatūrų.
• Naudokite tik su įrenginiu pateiktą maitinimo adapterį.
• Užtikrinkite tinkamą vėdinimą aplink įrenginį. Neužblokuokite ventiliacijos angų.
• Venkite įrenginio statyti šalia šilumos šaltinių arba tiesioginiuose saulės spinduliuose.
• Atjunkite maitinimo adapterį žaibuojant arba kai prietaisas ilgą laiką nenaudojamas.

3. Produktas baigtasview

Priekinio skydelio valdikliai

The front panel of the TD-3-AM features various controls for sound shaping and sequencing:

Vaizdas: priekis view of the Behringer TD-3-AM synthesizer, showing all knobs, buttons, and the main display area.

• Tempas: Reguliuoja sekvencerio atkūrimo greitį.
• Bangos forma: Selects between sawtooth and square wave for the VCO.
• Melodija: Fine-tunes the pitch of the oscillator.
• Atskyrimas: Controls the filter's cutoff frequency.
• Rezonansas: Adjusts the filter's resonance.
• Vokas: Controls the amount of envelope modulation applied to the filter.
• Skilimas: Sets the decay time of the envelope.
• Akcentas: Controls the intensity of accented notes.
• Iškraipymas: Activates and adjusts the built-in distortion effect.
• Apimtis: Valdo bendrą išvesties garsumą.
• Režimo parinkiklis: Switches between Write, Play, Pattern, and Track modes for sequencing.
• Pitch Mode Buttons: Used for entering notes and setting pitch parameters.
• Time Mode Buttons: Used for setting note duration, accent, and slide.
• Pradėti/sustabdyti: Pradeda arba sustabdo sekvencerio atkūrimą.

Galinio skydelio jungtys

The rear panel provides essential input and output connections:

Vaizdas: Galinis view of the Behringer TD-3-AM synthesizer, showing the output, MIDI, USB, and power connections.

• Išvestis: 1/4-inch TS jack for audio output.
• MIDI įėjimas/išėjimas/perėjimas: 5-pin DIN connectors for MIDI communication.
• USB: USB-B port for MIDI over USB and firmware updates.
• Maitinimo DC įvestis: Connection for the 9V DC power adapter.

Viršutinio skydelio jungtys

Additional connections are located on the top panel for advanced integration:

Vaizdas: Iš viršaus į apačią view of the Behringer TD-3-AM synthesizer, highlighting the small jack connections for Filter In, Sync Out, CV Out, Gate Out, and Phones.

• Filter In: 3.5mm jack for external audio input to the filter.
• Sync Out: 3.5mm jack for sending clock synchronization signals.
• CV Out: 3.5mm jack for sending control voltage signalus.
• Išėjimo vartai: 3.5mm jack for sending gate signals.
• Telefonai: 3.5mm stereo jack for headphone monitoring.

4. Sąranka

Follow these steps to set up your Behringer TD-3-AM:

1. Maitinimo jungtis: Connect the supplied 9V DC power adapter to the 'Power DC Input' on the rear panel and plug it into a suitable power outlet.
2. Garso išvestis: Connect the 'Output' jack on the rear panel to your mixer, audio interface, or amplifier using a 1/4-inch TS cable. For private monitoring, connect headphones to the 'Phones' jack on the top panel.
3. MIDI/USB jungtis (neprivaloma):
   • For MIDI control from an external device (e.g., MIDI keyboard, sequencer), connect the MIDI OUT of your device to the 'MIDI In' on the TD-3-AM.
   • To control the TD-3-AM via a computer, connect a USB-B cable from the TD-3-AM's 'USB' port to your computer. The unit will be recognized as a MIDI device.

Jungties schemos:

Image: Diagram illustrating how to connect the TD-3-AM to a MIDI keyboard, computer via USB, audio interface, studio monitors, and headphones.

Image: Diagram showing the connection of the TD-3-AM to a keyboard ampgarso išvesties pakėliklis.

Image: Diagram demonstrating how to connect headphones directly to the TD-3-AM for monitoring.

5. Operacinis

Pagrindinė operacija:

1. Maitinimas: Ensure all connections are secure, then connect the power adapter to the mains. The unit will power on automatically.
2. Garso reguliavimas: Start with the 'Volume' knob at a low setting and gradually increase it to a comfortable listening level.
3. Garso generavimas:
   • Use the 'Waveform' switch to select between sawtooth and square wave.
   • Adjust 'Tune', 'Cutoff', 'Resonance', 'Envelope', 'Decay', and 'Accent' knobs to sculpt your desired bass sound.

Sequencer Operation:

The TD-3-AM features a 16-step sequencer for creating and playing patterns.

1. Režimo pasirinkimas: Use the 'Mode' rotary switch to select between 'Write' (for programming patterns) and 'Play' (for playing patterns).
2. Pattern/Track Selection: Use the 'Pattern Group' and 'Track' selectors to choose where to store or play your sequences.
3. Writing a Pattern: In 'Write' mode, use the 'Pitch Mode' and 'Time Mode' buttons to enter notes, accents, and slides. Refer to the detailed instruction manual (available on the Behringer website) for advanced sequencing techniques.
4. Playing a Pattern: In 'Play' mode, select your desired pattern and press 'Start/Stop' to begin playback. Adjust 'Tempo' to change the speed.

Sinchronizavimas:

The TD-3-AM can synchronize with external devices via MIDI or analog clock:

• MIDI Sync: The unit can receive MIDI clock signals from an external MIDI master device. Ensure the MIDI channel is correctly set (default is channel 1).
• Analoginis sinchronizavimas: Use the 'Sync In' and 'Sync Out' jacks for synchronization with other analog gear.

6. Priežiūra

Proper maintenance ensures the longevity and optimal performance of your TD-3-AM:

• Valymas: Įrenginiui valyti naudokite minkštą, sausą šluostę. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Saugykla: When not in use, store the synthesizer in a cool, dry place, away from direct sunlight and extreme temperatures.
• Firmware atnaujinimai: Reguliariai tikrinkite „Behringer“ website for firmware updates. Updates can be installed via the USB connection using the Behringer Synth Tool software.

7. Problemų sprendimas

If you encounter issues with your TD-3-AM, refer to the following common troubleshooting steps:

Jei problema išlieka ir išbandžius šiuos veiksmus, susisiekite su „Behringer“ klientų aptarnavimo tarnyba.

8. Specifikacijos

9. Garantija

Warranty information for the Behringer TD-3-AM is typically provided with the product at the time of purchase or can be found on the official Behringer websvetainėje. Prašome išsaugoti pirkimo įrodymą, jei prireiktų pateikti pretenziją dėl garantijos.

10. Parama

For further assistance, technical support, or to download the latest firmware and software (such as the Behringer Synth Tool), please visit the official Behringer websvetainė:

www.behringer.com

You may also find helpful resources and community forums on the Behringer support pages.