„Scheppach HM254“ kampinio pjūklo ir UMF2000 atraminio stovo naudojimo instrukcija

1. Svarbios saugos instrukcijos

Always observe basic safety precautions when operating power tools to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before use.

• Darbo zonos sauga: Darbo vieta turi būti švari ir gerai apšviesta. Netvarkingos arba tamsios vietos skatina nelaimingus atsitikimus. Nenaudokite elektrinių įrankių sprogioje aplinkoje, pavyzdžiui, ten, kur yra degių skysčių, dujų ar dulkių.
• Elektros sauga: Elektrinių įrankių kištukai turi atitikti lizdą. Niekada nemodifikuokite kištuko. Venkite kūno kontakto su įžemintais paviršiais.
• Asmeninis saugumas: Visada dėvėkite akių apsaugos priemones. Dirbdami su triukšmingais įrankiais, naudokite klausos apsaugos priemones. Tinkamai apsirenkite; venkite laisvų drabužių ar papuošalų. Suriškite ilgus plaukus.
• Įrankio naudojimas ir priežiūra: Nenaudokite elektrinio įrankio per jėgą. Naudokite savo darbui tinkamą elektrinį įrankį. Prieš atlikdami bet kokius pakeitimus, keisdami priedus ar padėdami elektrinius įrankius sandėliuoti, atjunkite kištuką nuo maitinimo šaltinio.
• Mitre Saw Specific Safety: Ensure the blade guard is always in place and functioning correctly. Keep hands away from the cutting area. Secure the workpiece firmly before cutting. Allow the blade to reach full speed before beginning a cut.
• Lazerio sauga: Do not stare directly into the laser beam. Avoid directing the laser beam at other persons or reflective surfaces.

2. Produktas baigtasview

The Scheppach HM254 Mitre Saw is a powerful tool designed for precise cutting of wood, plastic, and aluminum. It comes bundled with the UMF2000 Support Stand for enhanced stability and versatility.

Komplekto turinys:

• Scheppach HM 254 Mitre Saw
• HW 48T Saw Blade
• HW 60T Saw Blade
• Scheppach UMF 2000 Support Stand

Pagrindinės funkcijos:

• Galingas variklis: 2000W motor for versatile cutting tasks.
• Precision Laser Guide: Integrated laser for accurate cutting line indication.
• Wide Cutting Capacity: Up to 340 mm cutting width and 90 mm cutting height.
• Minkštas paleidimas: Ensures a smooth and controlled start-up.
• Patvari konstrukcija: Stable and lightweight die-cast aluminum frame.
• Padidintas saugumas: Fully enclosed blade guard.
• UMF2000 Support Stand: Provides ergonomic working height, lightweight yet sturdy construction, universal machine grip, and a maximum load capacity of 250 kg. Features extendable side supports for long workpieces.

3. Sąranka

Išpakavimas ir patikrinimas:

1. Atsargiai išimkite visus komponentus iš pakuotės.
2. Verify that all listed kit contents are present.
3. Inspect all parts for any signs of shipping damage. Do not operate the tool if damage is found.

HM254 Mitre Saw Assembly:

1. Ašmenų montavimas: Ensure the saw is unplugged. Open the blade guard. Carefully mount the desired saw blade (HW 48T for general purpose, HW 60T for finer cuts) onto the arbor, ensuring the rotation direction matches the arrow on the guard. Secure with the arbor nut.
2. Pagrindo montavimas: Secure the saw to a stable workbench or the UMF2000 support stand using appropriate bolts and nuts.
3. Koregavimai: Familiarize yourself with the miter angle, bevel angle, and depth adjustment mechanisms. Refer to the markings for common angles.
4. Lazerinis lygiavimas: The laser guide is pre-calibrated, but check its alignment with a test cut on scrap material. Adjust if necessary according to the detailed instructions in the full manual.

UMF2000 Support Stand Assembly:

1. Kojų išdėstymas: Unfold the legs of the UMF2000 stand and ensure they are securely locked in place.
2. Attaching the Saw: Place the HM254 mitre saw onto the universal adjustable machine grips of the UMF2000 stand. Secure the saw using the provided clamps arba varžtais.
3. Atramos svirčių reguliavimas: Extend the side support arms to the desired length for supporting long workpieces. Adjust the height of the support rollers to match the saw's cutting surface.

4. Operacija

Bendras veikimas:

1. Maitinimo jungtis: Connect the saw to a 230V power supply. Ensure the power outlet is properly grounded.
2. Medžiagos tinkamumas: The HM254 is suitable for cutting wood, plastic, and aluminum. Always use the appropriate blade for the material.
3. Ruošinio tvirtinimas: Visada klamp the workpiece firmly to the fence and table before making any cut. Never hold the workpiece by hand.

Pjovimo procedūros:

• Įstrižiniai pjūviai: Adjust the turntable to the desired angle (left or right). Lock the turntable securely.
• Įstrižiniai pjūviai: Adjust the saw head to the desired bevel angle (typically left only for this model). Lock the saw head securely.
• Compound Cuts: Combine miter and bevel adjustments for complex angles.
• Lazerio kreiptuvo naudojimas: Activate the laser to project a cutting line onto the workpiece. Align the workpiece with this line for precise cuts.
• Pjūvio atlikimas: With the workpiece secured, depress the trigger to start the saw. Allow the blade to reach full speed (soft start will manage this smoothly). Slowly lower the saw head through the material. Once the cut is complete, release the trigger and allow the blade to stop completely before raising the saw head.

5. Priežiūra

Regular maintenance ensures the longevity and safe operation of your Scheppach HM254 Mitre Saw and UMF2000 Support Stand.

Valymas:

• Sawdust Removal: After each use, disconnect the saw from power and use a brush or vacuum cleaner to remove sawdust and debris from the motor vents, blade guard, and table.
• Ašmenų valymas: Periodically clean the saw blade to remove resin and pitch buildup, which can affect cutting performance. Use a suitable blade cleaner.

Ašmenų keitimas:

1. Pirmiausia sauga: Always unplug the saw before attempting to change the blade.
2. Nuimkite seną peilį: Use the provided wrench to loosen the arbor nut while holding the blade still with the blade lock button. Carefully remove the old blade.
3. Įdiekite naują peilį: Place the new 255mm blade onto the arbor, ensuring the teeth are oriented correctly for cutting (matching the rotation arrow). Tighten the arbor nut securely.

Tepimas:

Periodically apply a light machine oil to moving parts, such as the sliding mechanism and pivot points, to ensure smooth operation. Avoid lubricating electrical components.

Saugykla:

Store the saw and stand in a clean, dry, and secure location, out of reach of children. Protect the blade from damage during storage.

6. Problemų sprendimas

This section addresses common issues you might encounter during the operation of your mitre saw.

• Pjūklas neužsiveda:
  • Patikrinkite, ar maitinimo laidas tvirtai įjungtas į veikiantį lizdą.
  • Patikrinkite, ar nesuveikė grandinės pertraukiklis.
  • Ensure the safety switch or trigger lock is fully engaged.
• Netikslūs pjūviai:
  • Patikrinkite, ar peilis nėra atšipęs arba pažeistas, ir prireikus pakeiskite.
  • Įsitikinkite, kad ruošinys yra clamped securely and not shifting during the cut.
  • Verify that all angle adjustments (miter, bevel) are locked tightly.
  • Calibrate the laser guide if it appears misaligned.
• Per didelė vibracija arba triukšmas:
  • Inspect the blade for damage, missing teeth, or improper installation.
  • Ensure all mounting bolts for the saw and stand are tight.
  • Check for any loose components or debris within the saw mechanism.
• Blade Binding in Material:
  • Ensure the workpiece is properly supported and not pinching the blade.
  • Do not force the saw; allow the blade to cut at its own pace.
  • Check if the blade is dull or has excessive resin buildup.

7. Specifikacijos

Scheppach HM254 Mitre Saw:

• Įvesties galia: 2000W
• ttage: 230 V
• Ašmenų skersmuo: 255 mm
• Blade Rotation Speed: 4500 aps./min
• Cutting Width (90°/90°): 340 x 90 mm
• Cutting Width (90°/45°): 340 x 45 mm
• Cutting Width (45°/90°): 240 x 90 mm
• Cutting Width (45°/45°): 240 x 45 mm
• Matmenys (P x P x A): 770 x 595 x 590 mm
• Svoris: 14.3 kg
• Ašmenų medžiaga: Aluminum Oxide (for included blades)
• Paviršiaus rekomendacija: Aliuminis, Plastikas, Mediena

Scheppach UMF2000 Support Stand:

• Didžiausia apkrova: 250 kg
• Length (Extendable Supports): 1160–2000 mm
• Height with Support Arm: 900 mm
• Lentelės plotis: Maks. 375 mm
• Svoris: 13.5 kg

8. Garantija ir palaikymas

Scheppach products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty against defects in materials and workmanship.

For warranty claims, technical support, or spare parts, please contact your authorized Scheppach dealer or visit the official Scheppach websvetainėje, kur rasite išsamią kontaktinę informaciją.

Prašome išsaugoti pirkimo įrodymą garantijos tikslais.