Įvadas
This manual provides comprehensive instructions for the safe and effective setup, operation, and maintenance of your Yaheetech Aluminium 3 Folding Massage Table and Rolling Stool. Please read all instructions carefully before use to ensure proper functionality and longevity of your product.

Image: The Yaheetech Aluminium 3 Folding Massage Table and Rolling Stool set.
Saugos informacija
WARNING: This product can expose you to chemical Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture.
- Prieš naudodami įsitikinkite, kad visi komponentai yra patikimai sumontuoti.
- Do not exceed the maximum weight capacity of the massage table or stool.
- Reguliavimo metu laikykite rankas ir pirštus atokiai nuo judančių dalių.
- Naudokite ant lygaus, stabilaus paviršiaus, kad neapvirstų.
- Reguliariai tikrinkite gaminį, ar nėra nusidėvėjimo ar pažeidimų požymių. Nustokite naudoti, jei pastebėjote pažeidimų.
Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:
- 1 x Aluminium 3 Folding Massage Table
- 1 x Adjustable Rolling Stool
- 1 x Adjustable Headrest
- 2 porankiai
- 1 x Storage Bag (integrated with table when folded)
Sąrankos instrukcijos
Massage Table Setup
- Išskleiskite stalą: Place the folded massage table on its side on a flat surface. Release the chrome clasps and gently open the table.
- Ištieskite kojas: Allow the legs to unfold completely. Ensure all leg support cables are taut and the legs are locked into position.
- Reguliuoti aukštį: To adjust the table height, locate the small round knobs on each leg. Press the knobs and slide the inner leg section up or down to the desired height. Ensure all four legs are set to the same height and the knobs are securely engaged in the adjustment holes. The table offers 8 different height positions.
- Pritvirtinkite galvos atramą: Insert the headrest support bars into the designated slots at one end of the table. Adjust the angle of the headrest as needed.
- Pritvirtinkite porankius: Slide the armrests into the slots located on the sides of the table.

Image: Visual guide for unfolding the massage table and attaching the headrest and armrests.
Rolling Stool Assembly
The rolling stool typically requires minimal assembly. Follow these general steps:
- Pritvirtinkite ratukus: Insert the five casters (wheels) into the holes at the end of each leg of the stool base. Push firmly until they click into place.
- Connect Base to Seat: Place the stool seat upside down. Insert the pneumatic cylinder (if separate) into the center hole of the stool base. Then, place the seat onto the top of the pneumatic cylinder.
Naudojimo instrukcijos
Massage Table Operation
- Aukščio reguliavimas: As described in the setup section, press the round knobs on the legs to adjust the table height. Ensure all legs are at the same level for stability.
- Galvos atramos reguliavimas: The headrest can be tilted to various angles for client comfort. Loosen the adjustment levers, set the desired angle, and tighten the levers securely.
- Porankio naudojimas: The armrests provide additional comfort and support. Ensure they are fully inserted into their slots before use.

Image: Diagram showing the adjustable dimensions of the massage table, including height range.
Rolling Stool Operation
- Aukščio reguliavimas: To adjust the stool's height, pull the lever located under the seat while seated or standing. Release the lever at the desired height.
- Sukimo funkcija: The stool seat offers 360-degree rotation, allowing for easy movement and access without repositioning the base.
- Mobilumas: The five smooth-rolling casters allow for quiet and effortless movement across various floor surfaces.

Image: Diagram illustrating the 360-degree rotation and adjustable height features of the rolling stool.
Priežiūra
- Cleaning the Table: Wipe the massage table surfaces with a dry cloth. For deeper cleaning, a damp cloth with a few drops of gentle cleanser can be used, then wipe dry immediately.
- Cleaning the Stool: The PU leather surface of the stool can be cleaned with a damp cloth and a mild cleanser. The chrome iron base can be wiped with a dry cloth.
- Reguliarus patikrinimas: Periodically check all screws, bolts, and adjustment mechanisms for tightness and proper function. Tighten any loose fasteners.
- Saugykla: When not in use, fold the massage table and store it in a dry, cool place to prolong its lifespan.
Trikčių šalinimas
- Lentelės nestabilumas: Ensure all four legs are extended to the same height and the adjustment knobs are fully engaged. Check that the leg support cables are taut.
- Stool Not Adjusting Height: Verify that the height adjustment lever is fully engaged and the pneumatic cylinder is correctly seated.
- Sulankstymo / išskleidimo sunkumai: Ensure no obstructions are present and the clasps are fully released. Do not force the mechanism.
- Cypimo garsai: Check all joints and fasteners for tightness. Applying a small amount of silicone lubricant to pivot points may help.
Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Prekės ženklas | Yaheetech |
| Medžiaga (lentelė) | Aluminium, Alloy, PVC Leather, High-Density Foam |
| Material (Stool) | Chrome Iron, PU Leather, High-Density Sponge |
| Produkto matmenys (lentelė) | 84 x 31.5 x 35 inches (L x W x H, fully extended) |
| Adjustable Table Height | 26.6 - 35 inches (8 positions) |
| Product Dimensions (Stool) | 13.6 x 13.6 x 20.9-26.6 inches (Diameter x Height) |
| Prekės svoris | 29.4 svaras (iš viso už komplektą) |
| Spalva | Juoda |
Garantija ir palaikymas
Dėl garantijos informacijos ar techninės pagalbos kreipkitės į oficialią gamintojo svetainę. website or contact the seller directly through your purchase platform. Keep your proof of purchase for any warranty claims.