Como Audio Analog Turntable (Model CATA) Instruction Manual

Įvadas

This instruction manual provides essential information for the proper setup, operation, and maintenance of your Como Audio Analog Turntable, Model CATA. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Image: The Como Audio Analog Turntable, featuring a walnut wood plinth, black platter, and tonearm.

Paveikslėlis: detalus view of the rich walnut finish on the turntable's plinth, showcasing the wood grain.

Pakuotės turinys

Before proceeding with setup, ensure all components are present and undamaged:

• Como Audio Analog Turntable unit
• Pre-mounted Ortofon cartridge/stylus
• Lėkštė
• Pavarokite diržą
• Removable clear dust cover
• Veltinis kilimėlis
• Garso kabelis
• Power supply (15V/0.8A, universal 110V-240V, 50-60Hz)
• Instrukcijų vadovas (šis dokumentas)

Sąrankos instrukcijos

1. Išpakavimas ir įdėjimas

• Atsargiai išimkite visus komponentus iš pakuotės.
• Patefoną pastatykite ant stabilaus, lygaus paviršiaus, atokiau nuo tiesioginių saulės spindulių, šilumos šaltinių ir per didelės vibracijos.

2. Lėkštės ir pavaros diržo montavimas

• Place the platter onto the spindle located on the turntable plinth.
• Locate the drive belt. Gently stretch the belt around the motor pulley (small metal cylinder) and the inner rim of the platter. Ensure the belt is not twisted.

3. Cartridge and Stylus

The Como Audio Analog Turntable comes with a premium Ortofon cartridge and stylus pre-mounted. No adjustment of counterweight or anti-skating is required for initial setup.

4. Dulkių dangtelio montavimas

Image: Detail of the removable clear dust cover, designed to protect the turntable from dust.

• Carefully align the hinges of the clear dust cover with the corresponding slots on the rear of the turntable plinth.
• Gently push down until the dust cover is securely in place. The dust cover is removable for cleaning or when not in use.

5. Garso jungtis

The turntable offers selectable Line output or Phono output. Choose the appropriate connection for your audio system:

• Line Output (Integrated Phono Pre-Amp): Use this option if your amplifier or music system (e.g., Como Audio music system) has an Auxiliary (AUX) input and does not have a dedicated Phono input. Connect the included audio cable from the turntable's Line Out to your system's AUX input.
• Fono išvestis: Use this option if your amplifier or music system has a dedicated Moving Magnet (MM) Phono input. Connect the included audio cable from the turntable's Phono Out to your system's Phono input. Ensure your amplifier's Phono input is selected.

Pastaba: If experiencing a humming noise, ensure proper grounding. Some audio systems may require a separate ground wire connection if available on your ampgyvesnis.

6. Maitinimo prijungimas

• Connect the power supply cable to the DC input jack on the rear of the turntable.
• Prijunkite maitinimo adapterį į tinkamą sieninį lizdą.

Naudojimo instrukcijos

1. Powering On and Speed Selection

• Locate the integrated power and speed control switch, typically on the bottom left side of the turntable plinth.
• Turn the switch to select either 33 1/3 aps./min for LPs or 45 aps./min for singles. The platter will begin to spin.

2. Įrašo grojimas

Image: The turntable with a record spinning on the platter, and the tonearm positioned over the record.

• Padėkite veltinio kilimėlį ant lėkštės.
• Carefully place a vinyl record onto the felt mat.
• Švelniai pakelkite tonarmą naudodami tonarmo svirtį.
• Position the stylus over the desired starting groove of the record.
• Lėtai nuleiskite žymėjimo svirtį, kad adata nusileistų ant plokštelės.
• Adjust the volume on your connected audio system.

3. Atkūrimo sustabdymas

• At the end of a record, or when you wish to stop playback, gently lift the tonearm using the cueing lever.
• Return the tonearm to its rest position and secure it with the tonearm clip.
• Turn the power/speed switch to the "Off" position to stop the platter from spinning.
• Pastaba: This turntable does not feature an automatic shut-off function. The platter will continue to spin until manually turned off.

Priežiūra

1. Patefono valymas

• Always power off and unplug the turntable before cleaning.
• Use a soft, dry, lint-free cloth to wipe the plinth and platter. Avoid abrasive cleaners or solvents.
• Dulkių dangteliui valyti, jei reikia, naudokite minkštą šluostę ir švelnų, neabrazyvinį valiklį.

2. Rašiklio priežiūra

• Regularly clean the stylus using a dedicated stylus brush, brushing gently from back to front.
• Venkite liesti rašiklio pirštais.
• A worn or damaged stylus can harm your records and degrade sound quality. Replace the stylus when necessary (typically after 500-1000 hours of playback, depending on usage and record condition).

3. Pavaros diržas

The drive belt is a wear item. If you notice inconsistent speed or the platter not spinning, the belt may need to be inspected or replaced. Contact Como Audio support for replacement parts.

Trikčių šalinimas

Specifikacijos

Garantija ir palaikymas

For warranty information, technical support, or replacement parts, please contact Como Audio directly through their official websvetainėje arba klientų aptarnavimo kanaluose. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.

Official Como Audio Websvetainė: www.comoaudio.com