Yaheetech Art Craft Drafting Table with Stool Instruction Manual

1. Įvadas

Thank you for choosing the Yaheetech Art Craft Drafting Table with Stool. This manual provides essential information for the safe assembly, operation, and maintenance of your new drafting table. Please read these instructions carefully before use and retain them for future reference.

2. Saugos informacija

ĮSPĖJIMAS: Exceeding the maximum load capacity may cause damage or injury. Use caution while moving and assembling the heavy table and stool. Follow assembly instructions for a safe setup.

• Prieš surinkdami įsitikinkite, kad visi komponentai yra ir nepažeisti.
• Surinkite gaminį ant minkšto, švaraus paviršiaus, kad išvengtumėte įbrėžimų.
• Tvirtai priveržkite visus varžtus ir veržles, bet neperveržkite.
• Surinkdami mažas dalis laikykite vaikams nepasiekiamoje vietoje.
• Ant stalviršio nestovėkite ir nesėdėkite.
• Distribute weight evenly on the tabletop and shelves.
• Reguliariai tikrinkite visus tvirtinimo elementus, kad jie būtų tvirtai pritvirtinti.

3. Produktas baigtasview

The Yaheetech Art Craft Drafting Table is designed for various creative and professional tasks, featuring adjustable height and tilt, integrated storage, and a comfortable stool.

Image 1: The Yaheetech Art Craft Drafting Table and accompanying stool, showcasing bendrą dizainą ir savybes.

Image 2: Detailed dimensions of the drafting table and stool, including tabletop length, width, height range, and stool dimensions.

4. Sąranka ir surinkimas

Assembly of the Yaheetech Art Craft Drafting Table requires careful attention to detail. While specific step-by-step instructions are typically provided in the packaging, here are general guidelines and key components to consider:

4.1 Išpakavimas ir komponentų patikrinimas

Carefully unpack all components and lay them out on a clean, soft surface. Verify that all parts listed in your product's assembly guide are present and undamaged. If any parts are missing or damaged, contact customer support immediately.

4.2 Rėmo surinkimas

Begin by assembling the main frame of the table. This typically involves attaching the legs to the crossbars using the provided hardware. Ensure all connections are stable before proceeding.

4.3 Tabletop and Adjustment Mechanism Installation

Attach the tabletop to the frame, paying close attention to the tilt and height adjustment mechanisms. These mechanisms allow for flexible positioning of the tabletop.

3 paveikslėlis: Stambus planas view of the tabletop's tilt adjustment mechanism, showing the notched bar for angle selection.

4.4 Storage Components and Accessories

Install the fabric drawers, retractable auxiliary surface, and integrated stationery holders. Ensure the pencil ledge is correctly attached and can be adjusted.

Image 4: Detail of the integrated pen holder, cup groove design, and the triangle buckle for adjustable lift.

5 vaizdas: View of the retractable two-level desktop, fixed anti-skid base, and anti-scratch foot pad design.

Image 6: Instructions for lifting and retracting the adjustable pencil ledge to secure items on the tilted surface.

4.5 Stool Assembly

Assemble the stool according to its specific instructions, ensuring the legs are securely attached to the seat and the footrest ring is stable.

Image 7: Close-up of the stool's faux leather seat, highlighting its soft and comfortable padding.

4.6 Surinkimo vaizdo įrašas

5. Naudojimo instrukcijos

5.1 Stalo aukščio reguliavimas

To adjust the table height, locate the adjustment knobs on the legs of the table. Loosen the knobs, carefully raise or lower the tabletop to your desired height, and then securely tighten the knobs to lock the table in place. The table height is adjustable from 69.5 cm (27.5 inches) to 92.5 cm (36.5 inches).

5.2 Adjusting Tabletop Angle

The tabletop can be tilted from 0 to 60 degrees. To adjust the angle, lift the tabletop slightly and engage the support mechanism into the desired notch. Ensure the tabletop is securely locked at the chosen angle before placing items on it.

Image 8: The tabletop shown at various tilt angles, illustrating its 0-60 degree adjustability for different tasks like writing, reading, and drawing.

5.3 Using the Retractable Auxiliary Surface

The retractable auxiliary surface can be pulled out to provide additional workspace for a laptop, reference materials, or other items. Push it back in when not needed to save space.

5.4 Utilizing Storage Options

• Stalčiai: Use the two nonwoven fabric drawers for storing mobile devices, small tools, or documents.
• Stationery Holders: The detachable tabletop side tray has separate slots for pens, brushes, and other small stationery items.
• Apatinė lentyna: The metal shelf below the drawers is suitable for storing drawing drafts, paint cans, or other supplies.

6. Priežiūra

• Valymas: Stalo paviršius nuvalykite minkšta,amp šluoste. Venkite stiprių cheminių medžiagų ar abrazyvinių valiklių, kurie gali pažeisti apdailą.
• Tvirtinimo detalės: Periodiškai patikrinkite visus varžtus ir veržles, ar jie gerai priveržti. Prireikus priveržkite, kad išlaikytumėte stabilumą.
• Persikėlimas: When moving the table, lift it rather than dragging it to prevent damage to the floor or the table's anti-scratch foot pads.
• Stalčiai: The nonwoven fabric drawers can be spot cleaned with a mild detergent if needed.

7. Problemų sprendimas

7.1 Stalo nestabilumas

• Problema: The table feels wobbly or unstable.
• Sprendimas: Check all assembly screws and bolts. Ensure they are fully tightened. Verify that the table is on a flat, even surface. Adjust the anti-scratch foot pads if necessary to level the table.

7.2 Difficulty Adjusting Height or Tilt

• Problema: The tabletop height or tilt mechanism is stiff or difficult to operate.
• Sprendimas: Ensure adjustment knobs are fully loosened before attempting to change position. Check for any obstructions in the mechanism. Apply a small amount of silicone lubricant to moving parts if stiffness persists.

7.3 Damaged or Ripped Drawers

• Problema: The fabric drawers are damaged.
• Sprendimas: While the drawers are made of nonwoven fabric, they are designed for light storage. Avoid overloading them or storing sharp objects that could cause tears. If replacement is needed, contact Yaheetech customer support.

8. Specifikacijos

9. Informacija apie garantiją

This Yaheetech product comes with a Limited Warranty. Please refer to the warranty card included with your purchase or visit the official Yaheetech websvetainėje rasite išsamias sąlygas, susijusias su draudimo apsauga ir jos trukme.

10. Pagalba klientams

For any questions, concerns, or assistance with your Yaheetech Art Craft Drafting Table, please contact Yaheetech customer support. You can typically find contact information on the product packaging, the brand's official websvetainėje arba per pirkimo vietą.