LENSGO 318C belaidžio prisegamo mikrofono naudotojo vadovas

Įvadas

This manual provides detailed instructions for the setup, operation, and maintenance of your LENSGO 318C Wireless Lavalier Microphone system. The LENSGO 318C is a compact UHF wireless microphone system designed for clear audio recording with various devices, including cameras, smartphones, and camcorders.

Please read this manual thoroughly before using the product to ensure proper function and to maximize its performance.

Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi toliau išvardyti daiktai:

• Siųstuvo (TX) blokas
• Imtuvo (RX) blokas
• Magnetinis spaustukas
• Windproof Frabbit Fur (Windscreen)
• Magnetinė sagtis
• Microphone Collar Clip
• Camera Cable (TRS)
• External Lavalier Microphone
• USB įkrovimo laidas (mikro USB)
• Smartphone Cable (TRRS)
• Card Pin (for reset)
• Sandėliavimo krepšys
• Instrukcijų vadovas
• Garantijos kortelė

Image: All components included in the LENSGO 318C Wireless Lavalier Microphone system package.

Produktas baigtasview

The LENSGO 318C system consists of a transmitter (TX) and a receiver (RX) unit, both featuring a compact design and magnetic attachment for versatile placement.

Pagrindinės funkcijos:

• UHF belaidis perdavimas: Utilizes UHF technology for stable signal transmission over distances up to 30 meters (98.4 ft) in open areas.
• 20 pasirenkamų kanalų: Offers multiple channels to avoid interference and ensure clear audio.
• Magnetic Module Combination: Allows for convenient disassembly and assembly, enabling flexible mounting options.
• Built-in and External Microphone Options: Features a built-in microphone, with an option to connect an external lavalier microphone for enhanced audio capture.
• Įkraunama baterija: Each unit includes a 500 mAh rechargeable battery, providing approximately 4 hours of operation on a full charge.
• Platus suderinamumas: Compatible with DSLR cameras, camcorders, iPhones, Android smartphones, iPads, and computers (may require additional adapters).

Image: Detailed product analysis highlighting the various parts and functions of the LENSGO 318C transmitter and receiver units.

Image: The LENSGO 318C units demonstrating the magnetic module combination for easy attachment.

Sąrankos vadovas

1. Charging the Units:

Before first use, fully charge both the transmitter (TX) and receiver (RX) units using the provided Micro USB charging cable. The charging port is located on the side of each unit. A full charge typically takes approximately 1.5 hours and provides up to 4 hours of operation.

Image: The Micro USB charging port and the single button for powering on the device.

2. Įjungimas ir susiejimas:

1. Press and hold the power button on both the TX and RX units for a few seconds to turn them on.
2. The units will automatically attempt to pair. Once successfully paired, the signal indicator light on the receiver will change from blue to cyan.
3. If pairing fails, ensure both units are charged and within range, then try again.

3. Prisijungimas prie įrenginio:

• Išmaniesiems telefonams / planšetiniams kompiuteriams: Use the provided TRRS (3-ring) smartphone cable. Connect one end to the receiver's audio output interface and the other end to your smartphone's 3.5mm audio jack. (Note: Newer iPhones may require a Lightning to 3.5mm adapter, and some Android phones may require a USB-C to 3.5mm adapter, not included).
• For Cameras/Camcorders: Use the provided TRS (2-ring) camera cable. Connect one end to the receiver's audio output interface and the other end to your camera's microphone input jack.

Image: Visual representation of the wide compatibility of the LENSGO 318C with different recording devices.

4. Attaching the Microphone:

The transmitter unit can be attached to clothing using the magnetic clip or the microphone collar clip. For optimal audio quality, position the microphone approximately 6-8 inches (15-20 cm) from the speaker's mouth. If using the external lavalier microphone, plug it into the external microphone port on the transmitter. The built-in microphone will automatically deactivate when an external microphone is connected.

Image: The LENSGO 318C transmitter clipped to a person's shirt, with the external lavalier microphone attached.

Naudojimo instrukcijos

Kanalo pasirinkimas:

The LENSGO 318C features 20 UHF selectable channels. If you experience interference, you can change the operating frequency. To do this, simply press the power/frequency selection button on the transmitter unit. The receiver will automatically match the new frequency. It is recommended to select a channel with the least interference for optimal audio quality.

Garso stebėjimas:

Some recording devices allow for real-time audio monitoring through their headphone jack. If your device supports this, connect headphones to monitor the audio being captured by the microphone. This helps ensure proper levels and sound quality during recording.

Įrašas:

Once the microphone system is set up and connected to your recording device, begin recording as you normally would with your camera, smartphone, or camcorder. Ensure the microphone input is selected on your device if applicable.

Vaizdas: pvzamples of the LENSGO 318C in use for different recording applications.

Priežiūra

• Valymas: Use a soft, dry cloth to clean the microphone units. Avoid using liquids or abrasive cleaners.
• Saugykla: Store the microphone system in the provided storage bag in a cool, dry place when not in use.
• Akumuliatoriaus priežiūra: To prolong battery life, avoid fully discharging the units frequently. Recharge them regularly, even if not in constant use.
• Priekinis stiklas: Use the windproof fur (windscreen) when recording outdoors to minimize wind noise.

Trikčių šalinimas

• Nėra garso / mažas garsumas:
  • Ensure both TX and RX units are powered on and successfully paired (receiver light is cyan).
  • Check that cables are securely connected to both the receiver and your recording device.
  • Verify that the correct cable (TRS for camera, TRRS for smartphone) is being used.
  • Adjust the microphone input level on your recording device.
  • Ensure the external lavalier microphone is fully plugged into the transmitter if used.
• Trikdžiai / prasta garso kokybė:
  • Change the operating channel by pressing the power/frequency selection button on the transmitter.
  • Ensure the transmitter and receiver are within the optimal operating range (within 20 meters / 65.6 ft for best results).
  • Avoid obstacles between the transmitter and receiver that might block the signal.
  • Minimize proximity to other wireless devices that might cause interference.
• Units Not Powering On/Charging:
  • Ensure the USB charging cable is properly connected to a power source and the units.
  • Išbandykite kitą USB įkrovimo laidą arba maitinimo adapterį.
  • If a unit is unresponsive, use the provided card pin to press the reset button (Insurance key) on the unit.

Specifikacijos

Garantija ir palaikymas

LENSGO provides comprehensive after-sales support for the 318C Wireless Lavalier Microphone system.

• Atsakymo laikas: Į klientų užklausas paprastai atsakoma per 24 valandas.
• Grąžinimo politika: 60-day worry-free return period.
• Pakeitimas: Replacement available within 12 months of purchase.
• Techninė pagalba: Lifetime after-sales consultation and technical support are provided.

For any questions or assistance, please contact LENSGO customer service.

Image: LENSGO customer service commitment details.