Yaheetech Adjustable PU Leather Swivel Bar Stools (Set of 2) - User Manual

1. Svarbi saugos informacija

⚠ WARNING: This product can expose you to chemical Di(2-ethylhexyl)phthalate (DEHP) and Lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/furniture.

• Prieš surinkdami ir naudodami atidžiai perskaitykite visas instrukcijas.
• Surinkimo metu laikykite vaikus atokiau. Mažos dalys gali kelti pavojų užspringti.
• Prieš naudodami įsitikinkite, kad visi komponentai yra tvirtai pritvirtinti.
• Neviršykite maksimalios 330 svarų (apie 400 svarų) svorio ribos.
• Naudokite ant lygaus, stabilaus paviršiaus, kad neapvirstų.
• Avoid standing on the stool.

2. Pakuotės turinys

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact Yaheetech customer support.

• 2 x Seat Cushions with Backrest
• 2 x Gas Lifts
• 2 x kojų atramos
• 2 x Bases
• Aparatūros rinkinys (varžtai, poveržlės, šešiabriaunis raktas)
• Surinkimo instrukcijų vadovas

Vaizdas: Išsprogdintas view of bar stool components.

3. Surinkimo instrukcijos

Assembly is straightforward and typically takes less than 10 minutes per chair. Follow these steps carefully:

1. Attach the Seat to the Gas Lift: Align the mounting holes on the bottom of the seat cushion with the top of the gas lift mechanism. Secure with the provided screws and Allen wrench.
2. Insert the Gas Lift into the Base: Remove the protective cap from the top of the gas lift. Insert the narrow end of the gas lift into the center hole of the stool base. Ensure it is seated firmly.
3. Pritvirtinkite kojų atramą: Slide the footrest ring over the gas lift and secure it in place according to the instructions, typically by tightening a screw or bolt.
4. Bandymo stabilumas: Once assembled, gently sit on the stool to ensure all connections are secure and the stool is stable.

Vaizdas: Įvairūs views of the assembled bar stool.

Vaizdas: Išsamus view of the gas lift, base, and footrest components.

4. Naudojimo instrukcijos

4.1. Sėdynės aukščio reguliavimas

The bar stool features an adjustable height mechanism. To adjust the seat height:

• Norėdami pakelti sėdynę: Stovėdami patraukite svirtį, esančią po sėdyne, aukštyn. Sėdynė pakils automatiškai. Atleiskite svirtį, kai pasieksite norimą aukštį.
• Norėdami nuleisti sėdynę: Sėdėdami patraukite po sėdyne esančią svirtį aukštyn. Sėdynė nusileis žemyn dėl jūsų svorio. Atleiskite svirtį, kai bus pasiektas norimas aukštis.

The adjustable seat height ranges from approximately 21.7 inches to 29.9 inches, suitable for counter tables and bar tables between 32-40 inches high.

4.2. Pasukimo funkcija

The seat is designed to rotate 360 degrees, allowing for easy movement and interaction without needing to reposition the entire stool.

5. Priežiūra ir priežiūra

To ensure the longevity and appearance of your Yaheetech bar stools, follow these maintenance guidelines:

• Valymas: Nuvalykite PU odos paviršių skelbimuamp cloth. For stubborn stains, use a mild soap solution and then wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Rėmo priežiūra: The electroplated metal base and frame can be cleaned with a soft, dry cloth. Avoid prolonged exposure to moisture to prevent tarnishing.
• Reguliarūs patikrinimai: Periodiškai patikrinkite visus varžtus ir jungtis, kad jie būtų tvirtai priveržti. Jei reikia, priveržkite.
• Svorio talpa: Do not exceed the maximum weight capacity of 330 pounds to prevent damage and ensure safety.

Image: Close-up of the PU leather and foam cushion, emphasizing comfort and ease of cleaning.

6. Problemų sprendimas

If you encounter any issues with your bar stools, refer to the following common problems and solutions:

• Išmatos jaučiasi nestabilios:
  • Įsitikinkite, kad visi surinkimo varžtai yra visiškai priveržti.
  • Verify the stool is on a flat, even surface.
• Aukščio reguliavimas neveikia:
  • Check if the gas lift protective cap has been removed.
  • Ensure the lever mechanism is not obstructed.
  • If the gas lift is faulty, contact customer support for a replacement.
• Cypimo garsas:
  • Apply a small amount of silicone lubricant to the swivel mechanism or gas lift connection points.
  • Įsitikinkite, kad visos dalys yra tvirtai pritvirtintos.

For issues not covered here, please contact Yaheetech customer support.

7. Gaminio specifikacijos

Paveikslėlis: Išsamūs gaminio matmenys.

8. Garantija ir palaikymas

Yaheetech products are designed for quality and durability. For specific warranty information, please refer to the documentation included with your purchase or visit the official Yaheetech website. If you require assistance with assembly, parts, or have any questions, please contact Yaheetech customer support directly.

Kontaktinė informacija: Please refer to the contact details provided on the Yaheetech official websvetainėje arba pirkimo kvite.