1. Įvadas
The DeltaTrak 15051 Ultra Fast Fold Thermometer is engineered for rapid and accurate temperature measurements, making it suitable for demanding applications such as food operations. Its design prioritizes speed, reliability, and flexibility to meet stringent safety standards. This manual provides essential information for the proper use and maintenance of your thermometer.
2. Saugos informacija
- Do not immerse the entire thermometer in water. The probe is waterproof, but the main unit should not be submerged.
- Termometrą laikykite vaikams nepasiekiamoje vietoje.
- Handle the stainless-steel probe with care as it has a sharp tip.
- Do not expose the thermometer to extreme temperatures outside its operating range (-58°F to 572°F / -50°C to 300°C).
- Always clean the probe before and after each use to prevent cross-contamination.
3. Pakuotės turinys
- 1 x DeltaTrak 15051 Ultra Fast Fold Thermometer
- 1 x baterija (iš anksto įdiegta)
4. Produktas baigtasview
The DeltaTrak 15051 features a large LCD display, a foldable stainless-steel probe, and intuitive buttons for various functions.

Image: DeltaTrak 15051 Ultra Fast Fold Thermometer. The thermometer is white and blue, with a digital display showing '190.6' and buttons for °F/°C, CAL, HOLD, MIN, and MAX. The stainless steel probe is extended from the main unit.
Pagrindiniai komponentai:
- Foldable Stainless-Steel Probe: Adjustable from 0° to 180° for flexible positioning.
- LCD ekranas: Large, easy-to-read display for temperature readings.
- °F/°C mygtukas: Toggles between Fahrenheit and Celsius units.
- KALIBRAVIMO mygtukas: For calibration (refer to calibration section for details).
- LAIKYMO mygtukas: Freezes the current temperature reading on the display.
- MIN/MAX mygtukas: Displays the minimum and maximum temperatures recorded during a measurement session.
5. Sąranka
The DeltaTrak 15051 thermometer comes with a pre-installed battery. No initial setup is typically required beyond removing any protective packaging.
- Atsargiai išimkite termometrą iš pakuotės.
- Unfold the stainless-steel probe to activate the thermometer. The display will turn on automatically.
- Ensure the display shows a reading. If not, check the battery compartment.
6. Naudojimo instrukcijos
6.1. Temperatūros matavimas
- Unfold the probe to turn on the thermometer.
- Insert the stainless-steel probe into the center of the food or liquid being measured. Ensure the probe tip is fully immersed and not touching the bottom or sides of the container.
- Wait for the reading on the LCD display to stabilize. The thermometer provides an almost instantaneous response, typically under 4 seconds.
- Read the temperature displayed.
- To turn off the thermometer, fold the probe back into its housing.
6.2. Temperatūros vienetų perjungimas (°F/°C)
Paspauskite °F/°C button located on the front of the thermometer to switch between Fahrenheit and Celsius temperature scales.
6.3. Funkcijos HOLD naudojimas
Paspauskite LAIKYTI button to freeze the current temperature reading on the display. This is useful when you need to remove the probe from the item to read the temperature more clearly. Press LAIKYTI again to resume live temperature measurement.
6.4. Using the MIN/MAX Function
Paspauskite MIN / MAX button to cycle through the minimum and maximum temperatures recorded since the thermometer was last turned on or the MIN/MAX memory was cleared. To clear the MIN/MAX memory, hold the MIN / MAX button for a few seconds until the display resets.
6.5. Calibration (CAL)
The thermometer is factory calibrated. If recalibration is necessary, refer to specific industry standards or contact DeltaTrak support for guidance. Typically, calibration involves placing the probe in an ice bath (0°C / 32°F) and adjusting the reading using the CAL mygtuką, jei reikia.
7. Priežiūra ir priežiūra
- Valymas: The probe can be cleaned with warm soapy water or an antibacterial wipe. The main unit should be wiped clean with a damp audinys. Do not wash the entire unit under running water or immerse it.
- Saugykla: Store the thermometer with the probe folded in a clean, dry place when not in use.
- Baterijos keitimas: When the display becomes dim or the thermometer does not turn on, it's time to replace the battery. The thermometer uses a standard button cell battery. Open the battery compartment, replace the old battery with a new one of the same type, and close the compartment securely.
8. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Termometras neįsijungia. | Baterija išsikrovusi arba neteisingai įdėta. | Replace the battery or ensure it is correctly inserted. |
| Netikslūs rodmenys. | Probe not fully inserted; probe tip touching container; thermometer needs calibration. | Ensure proper probe placement. If issues persist, consider calibration or contact support. |
| Ekranas blankus. | Senka baterija. | Pakeiskite bateriją. |
9. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | 15051 |
| Temperatūros diapazonas | -58°F iki 572°F / -50°C iki 300°C |
| Reagavimo laikas | Mažiau nei 4 sekundžių |
| Ekrano tipas | LCD |
| Zondo medžiaga | Nerūdijantis plienas |
| Ypatinga funkcija | Sulankstomas zondas |
| Maitinimo šaltinis | Battery Powered (Battery included) |
| Gaminio matmenys (IxPxH) | 17 x 6 x 3 cm |
| Išorinė medžiaga | Plastikiniai |
| Produkto priežiūros instrukcijos | Skalbti tik rankomis |
10. Garantija ir palaikymas
For warranty information and technical support, please refer to the official DeltaTrak websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.