1. Produktas baigtasview
The Montech X3 Mesh is an ATX Mid-Tower PC Gaming Case designed for high airflow and visual appeal. It comes equipped with six pre-installed fixed RGB lighting fans (3x 140mm in the front, 2x 120mm on top, and 1x 120mm in the rear) to optimize cooling and provide vibrant illumination. The case features a unique door-open tempered glass side panel for easy access and a full panoramic view jūsų vidinių komponentų.
Figure 1: Montech X3 Mesh PC Gaming Case (Black)
2. Sąrankos vadovas
2.1 Išpakavimas ir pirminė apžiūra
Carefully remove the case from its packaging. Inspect for any signs of damage during transit. Ensure all accessories, including screws and cable ties, are present.
2.2 Komponentų diegimas
The Montech X3 Mesh supports ATX, Micro-ATX, and Mini-ITX motherboards. It offers ample space for CPU coolers up to 160mm high and GPUs up to 305mm long.
Figure 2: Internal Component Clearance
2.2.1 Pagrindinės plokštės montavimas
- Open the tempered glass side panel by gently pulling the fabric tab.
- Įstatykite įvesties / išvesties skydą į pagrindinės plokštės išpjovą korpuso gale.
- Align your motherboard with the standoffs inside the case and secure it with screws.
2.2.2 Maitinimo bloko (PSU) montavimas
The PSU is mounted at the rear bottom of the case. The case supports PSUs up to 160mm in length.
- Slide the PSU into its designated compartment from the rear of the case.
- Secure the PSU with screws from the outside.
2.2.3 Atminties disko diegimas
The case provides bays for 2x 2.5" SSDs behind the motherboard tray and 2x 3.5" HDDs (or 2x 2.5" SSDs) in a removable cage below the PSU shroud.
Figure 3: Drive Bay Locations
- For 2.5" SSDs, mount them directly onto the SSD brackets behind the motherboard tray.
- For 3.5" HDDs, slide them into the drive cage located under the PSU shroud and secure. The drive cage is removable for easier installation or to create more space.
2.2.4 Vaizdo plokštės (GPU) diegimas
Install your graphics card into the appropriate PCIe slot on your motherboard and secure it with the provided screws.
2.3 Kabelių valdymas
The Montech X3 Mesh offers dedicated cutouts and tie-down points behind the motherboard tray for efficient cable routing, ensuring a clean build and improved airflow.
Figure 4: Smart Cable Management Features
3. Naudojimo instrukcijos
3.1 Įjungimas
Connect your power cable to the PSU and press the power button located on the top I/O panel.
5 pav.: Viršutinis įvesties / išvesties skydelis
3.2 RGB apšvietimo valdymas
The X3 Mesh features fixed RGB lighting fans. To turn the fan lighting on or off, simply press the dedicated LED button on the top I/O panel. Note that the lighting is fixed and not addressable.
Video 1: Demonstration of RGB Lighting Fans
This video showcases the fixed RGB lighting of the fans within the Montech X3 Mesh case, highlighting their visual effect when powered on.
3.3 Oro srautas ir aušinimas
The case is designed for high airflow, with triple 140mm fans in the front providing massive air intake and pre-mounted fans at the top and rear for optimal exhaust. This configuration helps maintain low temperatures for your components.
Figure 6: Optimized Airflow Design
4. Priežiūra
4.1 Dulkių filtrų valymas
The Montech X3 Mesh includes a magnetic dust filter on the top panel and a washable dust filter for the PSU intake at the bottom. Regularly clean these filters to prevent dust buildup and maintain optimal airflow.
- Gently remove the magnetic dust filter from the top panel.
- Slide out the PSU dust filter from the bottom of the case.
- Clean the filters using compressed air or by washing them with water (ensure they are completely dry before re-installation).
4.2 Bendras valymas
Use a soft, dry cloth to wipe down the exterior of the case, including the tempered glass panel. For stubborn smudges on the glass, a glass cleaner can be used sparingly on the cloth, not directly on the panel.
5. Problemų sprendimas
5.1 Fans Not Spinning / RGB Not Lighting Up
- Ensure all fan Molex connectors are securely connected to your power supply. The pre-installed fans are daisy-chained, so check the connection to the last fan in the chain.
- Verify that the LED button on the top I/O panel is pressed to activate the RGB lighting.
- Check the power supply connections to the fan hub (if applicable) and the motherboard.
5.2 Poor Airflow / High Temperatures
- Clean all dust filters as described in Section 4.1.
- Ensure proper cable management to avoid obstructing airflow paths inside the case.
- Verify that all fans are spinning correctly.
6. Techninės specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Modelio pavadinimas | X3 MESH Black |
| Atvejo tipas | Mid Tower |
| Pagrindinės plokštės suderinamumas | ATX, Micro ATX, Mini ITX |
| Matmenys (IxPxH) | 14.57 x 8.27 x 18.9 colio |
| Prekės svoris | 14.3 svaro |
| Medžiaga | Grūdintas stiklas (šoninė panelė) |
| Iš anksto įdiegti ventiliatoriai | Front: 3x 140mm Fixed RGB Top: 2x 120mm Fixed RGB Rear: 1x 120mm Fixed RGB |
| Ventiliatorių palaikymas | Front: 3x 120mm/140mm Top: 2x 120mm/140mm Galinis: 1x 120mm |
| Radiatoriaus palaikymas | Viršus: iki 280 mm Front: Up to 360mm (with HDD cage removed) |
| CPU aušintuvo atstumas | 160 mm |
| GPU klirensas | 305 mm |
| Drive Bays | 2x 2.5" SSD 2x 3.5" HDD (convertible to 2.5" SSD) |
| I/O prievadai | 2x USB 2.0, 1x USB 3.0, HD Audio (Mic/Headphone), Power Button, Reset Button, LED Control Button |
| Maitinimo šaltinio tvirtinimo tipas | Galinis tvirtinimas |
7. Garantija ir palaikymas
For warranty information, technical support, or to inquire about replacement parts, please refer to the official Montech websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą garantijos pretenzijoms.
Montech offers various protection plans for extended coverage. Please visit the product page on Amazon or Montech's official website for details on available plans.