PERIPHERAL BOOSTER WATER PUMP

Įvadas

This manual provides essential information for the safe and efficient operation and maintenance of your Pedrollo PKm60 Peripheral Booster Water Pump. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper use and to prevent injury or damage.

The Pedrollo PKm60 pump is designed for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the pump's materials. It is ideal for domestic use, including water distribution in combination with small pressure sets and for garden and allotment irrigation. For optimal performance and longevity, the pump should be installed in an enclosed environment or at least sheltered from inclement weather.

Saugos informacija

ĮSPĖJIMAS: Nesilaikant šių saugos nurodymų, gali kilti elektros smūgis, gaisras, sunkūs sužalojimai ar mirtis.

• Always disconnect the pump from the power supply before performing any installation, maintenance, or repair work.
• Ensure the electrical installation complies with all local and national electrical codes. The pump requires a 220V 60Hz power supply.
• Siurblys turi būti tinkamai įžemintas, kad būtų išvengta elektros smūgio.
• Nenaudokite siurblio, jei pažeistas maitinimo laidas arba kištukas.
• Do not pump flammable, explosive, or corrosive liquids. This pump is designed for clean water only.
• Protect the pump from freezing temperatures. Freezing water inside the pump can cause severe damage.
• Užtikrinkite tinkamą ventiliaciją aplink siurblį, kad jis neperkaistų.
• Veikiant siurbliui, laikykite vaikus ir neįgaliotus asmenis atokiau nuo jo.
• For complex installations or if you are unsure, consult a qualified electrician or plumber.

Produktas baigtasview

The Pedrollo PKm60 is a reliable peripheral booster pump designed for efficient water handling in domestic applications. Its compact design and robust construction ensure long-term performance.

1 pav.: Priekinė pusė view of the Pedrollo PKm60 Peripheral Booster Water Pump. The pump is blue with a black motor housing and a red pressure relief valve. It features a 1-inch NPT inlet and outlet.

Pagrindinės funkcijos:

• Skysčio tipas: Švarus vanduo
• Programos: Water supply systems, pressure systems, irrigation pumps
• Tipologija: Surface pump
• Šeima: Periferinė
• Našumo diapazonas: Flow rate up to 11 GPM, Head up to 130 ft.
• Temperature of Liquid: -10 °C iki +60 °C
• Aplinkos temperatūra: Up to +40 °C (+50 °C for PK 60)
• Manometric Suction Lift: Iki 8 m
• Darbinis slėgis: 6 bar for PK 60
• Galia: 0.5 AG
• Jungtys: 1 inch x 1 inch NPT

Sąranka ir diegimas

Tinkamas montavimas yra labai svarbus siurblio veikimui ir ilgaamžiškumui. Rekomenduojama, kad montavimą atliktų kvalifikuotas specialistas.

1. Vieta: Install the pump in a dry, well-ventilated area, protected from direct sunlight, rain, and freezing temperatures. An enclosed environment is ideal.
2. Montavimas: Securely mount the pump on a stable, level surface using appropriate fasteners. Ensure there is sufficient space around the pump for ventilation and maintenance access.
3. Vamzdžių jungtys:
   • Connect the suction pipe to the pump's inlet (typically marked "IN" or with an arrow pointing towards the pump). Ensure the suction pipe is airtight to prevent air leaks, which can cause the pump to lose prime.
   • Connect the discharge pipe to the pump's outlet (typically marked "OUT" or with an arrow pointing away from the pump).
   • Use appropriate fittings (1 inch NPT) and sealants to ensure leak-free connections. Avoid putting strain on the pump's connections from the piping.
   • Siurbimo vamzdžio gale vandens šaltinyje sumontuokite kojinį vožtuvą su filtru, kad į siurblį nepatektų šiukšlių ir būtų palaikomas užpildymas.
4. Elektros jungtis:
   • Ensure the power supply matches the pump's requirements (220V 60Hz).
   • Connect the pump to a dedicated circuit protected by a circuit breaker or fuse of appropriate rating.
   • Patikrinkite tinkamą įžeminimą, kad išvengtumėte elektros pavojaus.
5. Siurblio užpildymas: Before initial operation, the pump must be primed.
   • Remove the priming plug (usually located on the top of the pump casing).
   • Užpildykite siurblį casinvisiškai pripildykite švariu vandeniu, kol jis perpils.
   • Tvirtai įsukite užpildymo kamštį.
   • Open any valves on the suction and discharge lines.

Naudojimo instrukcijos

Įrengus ir užpildžius, siurblys yra paruoštas darbui.

1. Pradinis paleidimas: After priming, connect the pump to the power supply. The pump should start immediately and begin pumping water.
2. Stebėjimas:
   • Observe the pump during the first few minutes of operation for any unusual noises, vibrations, or leaks.
   • Check the pressure gauge (if installed) to ensure the pump is operating within its specified working pressure range (6 bar for PK 60).
   • Ensure a steady flow of water. If the pump runs without delivering water, shut it off immediately to prevent damage from dry running. Re-prime the pump.
3. Nepertraukiamas veikimas: The pump is designed for continuous duty within its specified performance limits. Avoid operating the pump outside these limits.
4. Išjungti: To turn off the pump, disconnect it from the power supply. If the pump will be out of use for an extended period, especially in cold weather, follow the winterization procedures in the Maintenance section.

Priežiūra

Regular maintenance ensures the longevity and efficient operation of your Pedrollo pump.

• Reguliarus patikrinimas: Periodiškai tikrinkite siurblį, ar nėra nuotėkio, korozijos ar pažeidimų.asing or electrical components.
• Švara: Keep the pump and its surroundings clean and free from debris. Ensure ventilation openings are not obstructed.
• Kojinis vožtuvas / filtras: Inspect and clean the foot valve and strainer regularly to prevent blockages and ensure unrestricted water flow into the pump.
• Žiemos pasiruošimas (šaltam klimatui): If the pump is installed in an area subject to freezing temperatures and will not be used, it must be drained to prevent damage.
  • Atjunkite maitinimą nuo siurblio.
  • Open the drain plug (if present) or disconnect the suction and discharge pipes to allow all water to drain from the pump casing ir vamzdžiai.
  • Store the pump in a warm, dry place if possible, or ensure it is completely dry before reassembly.
• Profesionalus aptarnavimas: For any internal repairs or complex issues, contact a qualified service technician. Do not attempt to disassemble the motor or pump head beyond basic maintenance.

Trikčių šalinimas

This section outlines common issues and their potential solutions. Always disconnect power before troubleshooting.

Specifikacijos

Detailed technical specifications for the Pedrollo PKm60 Peripheral Booster Water Pump.

Figure 2: Performance curves illustrating the relationship between Head (ft.) and Flow rate (GPM) for Pedrollo PKm60 and PKm65 pumps. The PKm60 curve shows a maximum flow rate of approximately 11 GPM at 20 ft. head and a maximum head of 130 ft. at 0 GPM.

Garantija ir palaikymas

Warranty information for your Pedrollo PKm60 pump is typically provided at the time of purchase or included with the product packaging. Please refer to your purchase documentation for specific warranty terms and conditions.

For technical support, spare parts, or service inquiries, please contact Pedrollo customer service or an authorized Pedrollo dealer. Ensure you have your pump's model number (PKm60220) and serial number (if applicable) ready when contacting support.