Lydsto HD-JJCSY01

Lydsto Electronic Breathalyzer HD-JJCSY01 User Manual

Modelis: HD-JJCSY01

1. Įvadas

The Lydsto Electronic Breathalyzer HD-JJCSY01 is a portable device designed for measuring blood alcohol concentration (BAC) through breath analysis. It features a high-sensitivity semiconductor sensor and an LED/LCD digital display for clear and quick results. This manual provides essential information for the safe and effective use of your device.

Lydsto Electronic Breathalyzer device

Figure 1: Lydsto Electronic Breathalyzer HD-JJCSY01

2. Pakuotės turinys

Išpakuodami patikrinkite pakuotės turinį, kad įsitikintumėte, jog yra visi reikalingi daiktai:

  • 1 x Lydsto Electronic Breathalyzer
  • 5 x Replaceable Mouthpieces
  • 1 x laikymo maišelis
  • 1 x Vartotojo vadovas

Pastaba: veikimui reikalingos 3 AAA baterijos, kurios neįeina į pakuotę.

Contents of the Lydsto Breathalyzer package including device, mouthpieces, pouch, and manual

2 pav. Pakuotės turinys

3. Sąranka

  1. Įdėkite baterijas: Atidarykite baterijų skyriaus dangtelį įrenginio gale. Įdėkite 3 AAA baterijas, užtikrindami teisingą poliškumą (+/-). Tvirtai uždarykite dangtelį.
  2. Pritvirtinkite kandiklį: Select one of the provided mouthpieces and firmly insert it into the designated port on the side of the breathalyzer.
Priekyje view of the Lydsto Breathalyzer with a mouthpiece attached

Figure 3: Device with Mouthpiece Attached

4. Naudojimo instrukcijos

For accurate results, it is recommended to wait at least 20 minutes after your last alcohol consumption before performing a test.

  1. Maitinimas: Press and hold the power button (usually located on the front of the device) for approximately 1 second to turn on the breathalyzer.
  2. Apšilimas: The device will display a "Warm-up" countdown (typically 10 seconds). Wait for the countdown to complete.
  3. Pradėti testą: Once the warm-up is complete, the display will indicate it is ready for testing. Take a deep breath.
  4. Blow into Mouthpiece: Blow steadily and continuously into the mouthpiece for 4 to 5 seconds. A normal, consistent breath is sufficient; do not blow excessively hard.
  5. Skaityti rezultatus: The test result will be displayed on the LCD screen within 3 seconds. The result is typically shown in mg/L or g/L.
  6. Multiple Tests: For improved accuracy, it is advisable to perform three consecutive tests. Take the average value of these three tests for a more reliable result.
  7. Automatinis išjungimas: The device will automatically power off after 10 seconds of inactivity to conserve battery life.
Person holding the Lydsto Breathalyzer and performing a test, showing the digital display

Figure 4: Performing a Breath Test

Close-up of the Lydsto Breathalyzer showing the single power button and replaceable mouthpiece

Figure 5: Single Button Operation and Replaceable Mouthpiece

5. Priežiūra

  • Kandiklio valymas: The provided mouthpieces are washable and reusable. After use, detach them from the device and wash with mild soap and water. Rinse thoroughly and allow to air dry completely before reattaching or storing.
  • Prietaiso valymas: Wipe the exterior of the breathalyzer with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
  • Saugykla: When not in use, store the breathalyzer and its accessories in the provided storage pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Baterijos keitimas: Replace batteries when the low battery indicator appears on the display to ensure optimal performance.

6. Problemų sprendimas

  • Įrenginys neįsijungia:
    Ensure batteries are correctly installed with proper polarity. Replace with fresh AAA batteries if necessary.
  • Netikslūs arba nenuoseklūs rodmenys:
    Ensure you have waited at least 20 minutes after consuming alcohol. Perform multiple tests and average the results. Avoid testing in areas with strong odors or smoke.
  • Loud alarm after a high reading:
    This is a normal function to alert the user of a high alcohol level. To silence the alarm, turn off the device by pressing and holding the power button.
  • Display shows "Err" or other error message:
    Turn off the device and restart it. If the error persists, ensure the mouthpiece is correctly attached and you are blowing steadily.

7. Specifikacijos

FunkcijaSpecifikacija
Modelio numerisHD-JJCSY01
Jutiklio tipasHigh-sensitivity Semiconductor
Matavimo diapazonas0.00 g/L to 2.00 g/L
EkranasLED/LCD Digital Display
Maitinimo šaltinis3 x AAA baterijos (į komplektą neįeina)
Matmenys (I x P x A)11.2 x 2.9 x 6.1 cm
Svoris100 g
Close-up of the internal semiconductor chip of the Lydsto Breathalyzer

Figure 6: High-Sensitivity Semiconductor Sensor

8. Saugos informacija

This device is intended for informational purposes only and should not be used to determine fitness to drive or operate machinery. Blood alcohol concentration (BAC) results can vary based on individual physiology, metabolism, and recent consumption of food or beverages. Official legal limits vary by region, and official tests should always be performed by authorized personnel.

The data provided by this device is for reference only and does not constitute legal proof. Always adhere to local laws and regulations regarding alcohol consumption and driving.

Table showing conversion of alcohol concentration in air to blood alcohol concentration and a scale of driving danger levels

Figure 7: Alcohol Concentration Conversion and Danger Levels (Illustrative)

9. Garantija ir palaikymas

For technical support, warranty inquiries, or any questions regarding your Lydsto Electronic Breathalyzer HD-JJCSY01, please contact Lydsto customer service through the retailer's platform or the official Lydsto websvetainėje. Prašome išsaugoti pirkimo kvitą kaip pirkimo įrodymą garantiniams reikalavimams.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.