eSUN eBOX Lite Upgraded 3D Printing Filament Dryer Box User Manual

1. Produktas baigtasview

The eSUN eBOX Lite is an upgraded filament dryer box designed to maintain optimal conditions for 3D printing filaments. It effectively removes moisture, preventing common printing issues such as stringing, clogging, and poor adhesion. This device also functions as a filament storage box and spool holder, providing a comprehensive solution for filament management.

Key features include efficient heating, even temperature distribution, low-noise operation, and broad compatibility with various filament types and spool sizes.

Figure 1: eSUN eBOX Lite Filament Dryer Box with a red filament spool inside.

2. Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• eBOX Lite Dryer Box
• Maitinimo adapteris (JAV kištukas)
• User Manual (this document, and a physical copy)
• Filament Outlet Tube/Bayonet

Figure 2: Illustration of the eBOX Lite and its included accessories.

3. Sąrankos instrukcijos

1. Vieta: Place the eBOX Lite on a stable, flat surface away from direct sunlight, heat sources, and excessive humidity. Ensure adequate ventilation around the unit.
2. Maitinimo jungtis: Connect the provided power adapter to the DC input port on the back of the eBOX Lite. Plug the adapter into a standard US power outlet (AC100-240V ~ 50/60Hz).
3. Įkeliama kaitinimo medžiaga:
   • Open the transparent lid of the eBOX Lite.
   • Place your filament spool onto the internal rollers. Ensure the spool rotates freely. The maximum compatible spool size is Φ200mm (diameter) x 73mm (height).
   • Thread the filament through the designated outlet hole on the lid. If using the outlet conduit, attach it to the hole and thread the filament through it.
   • Saugiai uždarykite dangtį.

Figure 3: Visual guide for connecting power and loading filament.

4. Naudojimo instrukcijos

The eBOX Lite features a simple control panel with a display and buttons for setting temperature and time.

4.1. Valdymo skydelis baigtasview

• Ekranas: Shows current settings (temperature level, time remaining).
• Režimo mygtukas: Used to cycle between temperature setting mode and time setting mode.
• Aukštyn/žemyn mygtukai: Used to adjust values (temperature level, time).

4.2. Temperatūros ir laiko nustatymas

1. Maitinimas: After connecting the power, the display will light up.
2. Set Temperature Level:
   • Paspauskite Režimas button once to enter temperature setting mode. The display will show a number (1, 2, or 3).
   • Naudokite Aukštyn/Žemyn buttons to select the desired temperature level based on your filament type:
   • 1 lygis: Approximately 40°C (suitable for PLA/PLA+)
   • 2 lygis: Approximately 50°C (suitable for ABS/ABS+/PETG)
   • 3 lygis: Approximately 55°C (suitable for PVA/Nylon/PC)
   • Paspauskite Režimas button again to confirm the temperature level and proceed to time setting.
3. Set Heating Time:
   • The display will now show the time setting (e.g., "00.0h").
   • Naudokite Aukštyn/Žemyn buttons to set the desired heating duration from 0 to 18 hours. For optimal drying, eSUN recommends at least 2 hours for most filaments.
   • Paspauskite Režimas button again to start the drying process. The display will show the remaining time.

The eBOX Lite will maintain the set temperature and humidity throughout the drying cycle. Once the time expires, the heating will stop, but the box will continue to provide a dry storage environment.

Figure 4: Recommended temperature levels and corresponding filament types.

Figure 5: Graph illustrating humidity reduction over time during drying.

5. Priežiūra

Regular maintenance ensures the longevity and optimal performance of your eBOX Lite.

• Valymas: Nuvalykite įrenginio išorę minkštu, sausu skudurėliu. Nenaudokite abrazyvinių valiklių ar tirpiklių. Prieš valydami įsitikinkite, kad įrenginys yra atjungtas nuo elektros tinklo.
• Vidinis valymas: Periodically check the inside of the box for any dust or filament debris. Use a soft brush or compressed air to remove any accumulation.
• Saugykla: Jei prietaisas nenaudojamas ilgą laiką, atjunkite jį nuo elektros tinklo ir laikykite jį vėsioje, sausoje vietoje.

6. Problemų sprendimas

7. Specifikacijos

Figure 6: Detailed product specifications and package contents.

8. Garantija ir palaikymas

For warranty information and technical support, please refer to the official eSUN websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.

Papildomų išteklių ir naudotojo vadovo PDF versiją taip pat galite rasti adresu: eSUN eBOX Lite User Manual (PDF)