GBC ShredMaster AUTO+ 50X automatinio padavimo kryžminio pjovimo smulkintuvo naudotojo vadovas

Įvadas

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your GBC ShredMaster AUTO+ 50X Auto Feed Cross Cut Shredder. Please read this manual thoroughly before using the shredder and retain it for future reference.

The GBC ShredMaster AUTO+ 50X is designed for shredding paper documents and credit cards, offering a P-4 security level for confidential information. It features both automatic and manual feed options for convenience.

Saugos informacija

• Laikykite rankas, plaukus ir laisvus drabužius atokiai nuo popieriaus įvedimo angos.
• Vaikus ir gyvūnus laikykite toliau nuo smulkintuvo.
• Do not spray any flammable products onto the shredder or use near flammable materials.
• Prieš perkeldami, valydami ar ištuštindami šiukšliadėžę, atjunkite smulkintuvą nuo elektros tinklo.
• Do not shred metal objects, large paper clips, or adhesive labels as these can damage the cutting mechanism. Small paper clips and staples are generally acceptable for this model.
• Operate the shredder on a flat, stable surface.

Sąranka

1. Išpakavimas: Carefully remove the shredder from its packaging. Ensure all packing materials are removed from around the shredder and inside the waste bin.
2. Vieta: Position the shredder on a level, stable surface near a power outlet. Ensure there is adequate space around the unit for ventilation and access to the waste bin.
3. Maitinimo jungtis: Prijunkite maitinimo laidą į standartinį elektros lizdą.
4. Šiukšlių dėžė: Ensure the waste bin is correctly inserted into the shredder housing. The shredder will not operate if the bin is not properly seated.

Naudojimo instrukcijos

Valdymo skydas baigtasview

The control panel features intuitive touch controls for easy operation.

Automatic Feed Operation

The AUTO+ 50X features an automatic feed tray for shredding up to 50 sheets of 80 gsm paper at once.

1. Ensure the shredder is plugged in and the waste bin is correctly inserted.
2. Lift the automatic feed tray cover.
3. Stack up to 50 sheets of paper neatly into the automatic feed tray. Ensure there are no folded or crumpled sheets.
4. Close the automatic feed tray cover. The shredder will automatically detect the paper and begin shredding.

Rankinio tiekimo veikimas

For smaller quantities of paper (up to 6 sheets of 80 gsm) or credit cards, use the manual feed slot.

1. Ensure the shredder is plugged in and the waste bin is correctly inserted.
2. Insert paper or a credit card into the manual feed slot. The shredder will automatically start and stop.
3. For credit cards, insert one card at a time into the designated slot.

Apsauga nuo perkaitimo

To prevent motor overheating, the shredder is equipped with an automatic thermal overload protection system. After approximately 10 minutes of continuous shredding, the machine will automatically rest for 45 minutes to cool down. During this cool-down period, the shredder will not operate. Resume operation once the cool-down period is complete.

Priežiūra

Šiukšlių dėžės ištuštinimas

The shredder features an easy-to-empty 20-liter pull-out bin with a viewing window to monitor fill levels.

1. Atjunkite smulkintuvą nuo elektros lizdo.
2. Ištraukite šiukšliadėžę iš smulkintuvo priekio.
3. Empty the shredded material into a suitable receptacle.
4. Slide the waste bin back into the shredder until it is securely seated.
5. Plug the shredder back into the power outlet.

Smulkintuvo tepimas alyva

Regular oiling of the shredder blades is recommended to maintain optimal performance and extend the life of your shredder. Use GBC shredder oil or a vegetable-based oil (avoid aerosol oils).

1. Ant popieriaus įvedimo angos užtepkite ploną smulkintuvo alyvos sluoksnį.
2. Run the shredder in reverse for 10 seconds to distribute the oil.
3. Repeat this process after every 30 minutes of accumulated shredding or at least twice a month.

Valymas

Smulkintuvo išorę nuvalykite minkštu, sausu skudurėliu. Nenaudokite abrazyvinių valiklių ar tirpiklių.

Trikčių šalinimas

Specifikacijos

• Modelis: G2020050X
• Smulkinimo tipas: Skersinis pjūvis
• Apsaugos lygis: P-4 (DIN 66399)
• Smulkinimo dydis: 4 x 28 mm confetti cut
• Automatinio padavimo talpa: 50 lapų (80 gsm)
• Rankinio padavimo talpa: 6 lapų (80 gsm)
• Susmulkinti: Paper, small paper clips, staples, credit cards
• Dėžės talpa: 20 litrai
• Veikimo laikas: 10 minutes continuous, 45 minutes cool-down
• Apytiksliai matmenys (A x P x G): 40.6 cm x 43.2 cm x 38.1 cm (16" H x 17" W x 15" D, based on product images)
• Svoris: 11.6 kg
• Maitinimo šaltinis: Su laidu elektra
• Ypatingos savybės: Automatic Start/Stop, Jam Proof

Garantija ir palaikymas

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official GBC websvetainėje. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.

For further assistance, you may contact GBC customer service through their official channels. Details are typically available on the manufacturer's websvetainėje arba produkto pakuotėje.