1. Įvadas
Thank you for choosing the Imetec Eco Ceramic Fan Heater, Model 4033. This appliance is designed to provide efficient and comfortable heating for your indoor spaces. Featuring advanced ceramic technology, it offers rapid heating with reduced energy consumption. Please read this manual carefully before use to ensure safe and optimal operation.
Figure 1: Imetec Eco Ceramic Fan Heater, Model 4033.
2. Saugos informacija
Naudodami elektros prietaisus, visada laikykitės pagrindinių saugos priemonių, kad sumažintumėte gaisro, elektros smūgio ir asmenų sužalojimo riziką.
- Neuždenkite šildytuvo, kad išvengtumėte perkaitimo.
- Degias medžiagas laikykite toliau nuo šildytuvo.
- Do not use in bathrooms or wet areas.
- Įsitikinkite, kad ttage specified on the rating label corresponds to your mains supply voltage.
- Išjunkite prietaisą, kai nenaudojate arba prieš valydami.
3. Produkto ypatybės
- Keramikos technologija: Provides rapid and efficient heating.
- Energijos taupymas: Reduced energy consumption by up to 40%.
- Universalūs temperatūros nustatymai: Offers 3 temperature levels (cool, warm, very warm) for year-round use.
- Anti-Dust Filter: Helps maintain air quality.
- Ambient Thermostat: Allows you to select and maintain your desired room temperature.
Sumažintas energijos suvartojimas
3 temperatūros lygiai
Anti-dulkių filtras
Aplinkos termostatas
4. Sąranka
- Išpakavimas: Carefully remove the fan heater from its packaging. Retain the packaging for future storage or transport.
- Vieta: Place the heater on a firm, level surface, ensuring it is at least 1 meter (3 feet) away from walls, furniture, and curtains. Do not place it directly under a power socket.
- Maitinimo jungtis: Ensure the heater is switched off (turn the control knob to '0' or 'OFF'). Plug the power cord into a suitable 240V AC electrical outlet.
Figure 2: Ensure proper placement and connection.
5. Naudojimo instrukcijos
The Imetec Eco Ceramic Fan Heater features a control knob for power and temperature settings, and a thermostat knob for ambient temperature control.
Figure 3: Control knob for power and temperature settings.
- Power On/Temperature Selection:
- Turn the main control knob clockwise to select the desired operating mode:
- Fan Only (Cool Air): Oro cirkuliacijai be šildymo.
- Low Heat (Warm Air): For gentle heating, typically 1200W.
- High Heat (Very Warm Air): For rapid and powerful heating, typically 2000W.
- Termostato reguliavimas:
- Once a heat setting is selected, turn the thermostat knob (usually the inner knob) clockwise to increase the desired room temperature.
- The heater will operate until the set temperature is reached, then cycle on and off to maintain it.
- Norėdami sumažinti norimą temperatūrą, termostato rankenėlę pasukite prieš laikrodžio rodyklę.
- Išjungti: Turn the main control knob counter-clockwise to the '0' or 'OFF' position. Unplug the appliance from the power outlet when not in use for extended periods.
Figure 4: The fan heater provides comfortable warmth in various indoor environments.
6. Priežiūra
Reguliarus ventiliatoriaus šildytuvo aptarnavimas užtikrina jo ilgaamžiškumą ir efektyvų veikimą.
- Išorės valymas:
- Prieš valydami visada atjunkite šildytuvą nuo elektros tinklo ir leiskite jam visiškai atvėsti.
- Išorinius paviršius nuvalykite minkšta, damp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
- Įsitikinkite, kad į prietaiso vidų nepatenka vanduo.
- Cleaning the Anti-Dust Filter:
- The anti-dust filter is located at the rear of the unit.
- Gently remove the filter cover and the filter itself.
- Clean the filter with a soft brush or vacuum cleaner to remove accumulated dust.
- Rinse the filter under running water if necessary, ensuring it is completely dry before reinserting.
- Reattach the filter and cover securely.
- Saugykla: Jei šildytuvą ilgesnį laiką sandėliuosite, kruopščiai jį išvalykite ir laikykite originalioje pakuotėje sausoje, vėsioje vietoje.
Figure 5: Location of the anti-dust filter at the back of the unit.
7. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Šildytuvas neįsijungia. | Not plugged in; power switch off; no power at outlet; safety cut-out activated. | Check power cord connection; ensure main control knob is on a heat setting; check household fuse/circuit breaker; unplug, wait 10 minutes, then plug in again. |
| Nėra šildymo, veikia tik ventiliatorius. | Main control knob set to fan-only mode; thermostat set too low. | Turn main control knob to a heat setting (Low Heat or High Heat); increase thermostat setting. |
| Heater produces unusual noise. | Dust accumulation on fan blades; loose internal component. | Clean the anti-dust filter and fan area (ensure unit is unplugged); if noise persists, contact customer support. |
| Šildytuvas skleidžia degėsių kvapą. | Dust on heating elements; new unit initial burn-off. | Unplug immediately. Clean dust from elements (when cool). If new, a slight smell is normal for first few uses. If smell persists or is strong, discontinue use and contact support. |
8. Specifikacijos
| Prekės ženklas | Imetec |
| Modelis | 4033 |
| Spalva | Baltas |
| ttage | 240 voltų |
| Greičių skaičius | 3 |
| Ypatingos savybės | Electric, Ceramic Technology, Thermostat |
| Prekės svoris | 1.57 kilogramo |
| Matmenys (I x P x A) | 34.79 x 24.8 x 18.9 cm |
| Formos faktorius | Pjedestalas |
| Naudojimas viduje / lauke | Vidinis |
9. Garantija ir palaikymas
This Imetec Eco Ceramic Fan Heater, Model 4033, comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty duration and coverage details.
For technical support, troubleshooting assistance beyond what is provided in this manual, or warranty claims, please contact Imetec Customer Service. Contact information can typically be found on the official Imetec websvetainėje arba ant produkto pakuotės.
Internetiniai ištekliai: For additional information and support, visit the official Imetec websvetainė: www.imetec.com