„Scheppach HM216SPX“ radialinio kampinio pjūklo naudotojo vadovas

1. Saugos instrukcijos

Always read and understand all safety instructions before operating the Scheppach HM216SPX radial miter saw. Failure to follow these instructions can result in serious injury or death.

• Dėvėkite tinkamas asmenines apsaugos priemones (AAP): Visada dėvėkite apsauginius akinius, klausos apsaugą ir dulkių kaukę.
• Laikykite darbo vietą švarią ir gerai apšviestą: Netvarkingos arba tamsios vietos sukelia nelaimingus atsitikimus.
• Neeksploatuoti sprogioje aplinkoje: Nenaudokite elektrinių įrankių, kai šalia yra degių skysčių, dujų ar dulkių.
• Tvirtas ruošinys: Visada klamp or otherwise secure the workpiece firmly before cutting.
• Maintain proper balance and footing: Nepersistenkite.
• Naudokite tinkamą peilį: Įsitikinkite, kad pjūklo ašmenys yra aštrūs, švarūs ir tinkami pjaunamai medžiagai.
• Keep hands clear of the blade path: Niekada nelaikykite rankų šalia besisukančio peilio.
• Unplug before making adjustments or maintenance: Always disconnect the saw from the power source.

2. Produktas baigtasview

The Scheppach HM216SPX is a stable and lightweight radial miter saw designed for precise cutting of various materials, primarily wood. It features a powerful 2000W motor and a 210mm diameter saw blade, making it suitable for both longitudinal and angular cuts.

2.1 paveikslas: The Scheppach HM216SPX radial miter saw, showcasing its robust design and including two saw blades for versatile use.

2.2 paveikslas: Examples of applications for the HM216SPX, including cutting skirting boards, angular cuts, wooden beams, assembly wood, and laminate/parquet.

2.3 paveikslas: Key features of the saw: 2000W power, 230-240V~/50Hz power supply, integrated laser for precise cuts, and a compact design for easy handling and storage.

3. Sąranka

Before first use, ensure the saw is properly assembled and secured.

3.1 Išpakavimas ir surinkimas

1. Atsargiai išimkite visus komponentus iš pakuotės.
2. Attach any loose components as per the assembly diagram (refer to the separate assembly guide if provided).
3. Įsitikinkite, kad visi varžtai ir tvirtinimo detalės yra tvirtai priveržtos.

3.2 Pjūklo tvirtinimas

For stable and safe operation, it is highly recommended to secure the miter saw to a workbench or a stable stand.

• Naudokite tinkamus varžtus arba spaustukusamps to fasten the saw through the designated mounting holes in its base.
• Ensure the workbench or stand is level and can support the weight and forces generated during operation.

3.3 Adjusting Extensions

3.1 paveikslas: The extendable rear support ensures stable seating, especially during angular cuts. Adjust it to provide optimal support for your workpiece.

3.2 paveikslas: Utilize the left and right extensions to support longer workpieces, ensuring stability and accuracy during cutting operations.

4. Naudojimo instrukcijos

Familiarize yourself with the saw's controls and functions before beginning any cutting tasks.

4.1 Įjungimas / išjungimas

• Connect the power cord to a suitable 230-240V~/50Hz power outlet.
• To start the saw, press the power switch. To stop, release the switch.

4.2 Adjusting Cutting Angles

4.1 paveikslas: The miter table can be oriented from 45° to -45° for various angular cuts. Loosen the locking knob, adjust to the desired angle, and re-tighten.

4.2 paveikslas: The saw head can be inclined to the left from 0° to 45° for bevel cuts. Adjust the inclination using the designated lever and secure it.

4.3 Using the Laser Guide

The integrated laser provides a visual guide for your cut line, enhancing precision.

• Activate the laser using its dedicated switch (if available).
• Align the laser line with your marked cut line on the workpiece.
• Pastaba: The laser line indicates the cutting path, which has the width of the saw blade.

4.4 Pjūvio atlikimas

4.3 paveikslas: A user demonstrating the operation of the miter saw, making a precise cut on a wooden board. Always ensure the workpiece is stable and hands are clear.

4.4 paveikslas: The double slide rails allow for precise cuts up to 340 mm in width. Utilize the full range of motion for wider materials.

• Position the workpiece against the fence and secure it.
• Lower the saw blade slowly into the workpiece, allowing the blade to reach full speed before engaging.
• Apply steady, even pressure throughout the cut.
• Baigę pjauti, prieš pakeldami pjovimo galvutę, leiskite diskui nustoti suktis.

5. Priežiūra

Reguliarus techninis aptarnavimas užtikrina jūsų kampinio pjūklo ilgaamžiškumą ir optimalų veikimą.

5.1 Valymas

• After each use, disconnect the saw from power and clean off sawdust and debris using a brush or compressed air.
• Pay special attention to the blade guard, motor vents, and sliding mechanisms.
• Nenaudokite tirpiklių ar abrazyvinių valiklių.

5.2 Ašmenų keitimas

• Prieš keisdami pjovimo diską, visada atjunkite pjūklą nuo maitinimo šaltinio.
• Refer to the saw's specific instructions for accessing and removing the blade.
• Use only 210mm diameter blades with a 30mm bore, suitable for the saw's maximum RPM.
• Ensure the new blade is installed with the teeth pointing in the correct direction.

5.3 Tepimas

• Periodically apply a light machine oil to the sliding mechanisms to ensure smooth operation.
• Avoid over-lubrication, which can attract dust.

6. Problemų sprendimas

Šiame skyriuje aptariamos dažniausiai pasitaikančios problemos, su kuriomis galite susidurti naudodami kampinį pjūklą.

7. Specifikacijos

Technical data for the Scheppach HM216SPX Radial Miter Saw.

7.1 paveikslas: Visual representation of maximum cut dimensions and blade specifications. Max cut width: 340 mm, Max cut height: 65 mm. Blade size: 210 x 30 mm, with options for 24 or 48 teeth. Indicates robust construction.

8. Garantija ir palaikymas

The Scheppach HM216SPX Radial Miter Saw comes with a limited warranty. Please retain your proof of purchase for warranty claims.

8.1 Informacija apie garantiją

• For details regarding the specific terms and conditions of your limited warranty, please refer to the warranty card included with your product or visit the official Scheppach websvetainę.
• The warranty typically covers defects in materials and workmanship under normal use.

8.2 Pagalba klientams

• If you encounter any issues not covered in the troubleshooting section, or require technical assistance, please contact Scheppach customer support.
• Have your product model number (HM216SPX) and serial number (if applicable) ready when contacting support.