1. Produktas baigtasview
The Pedrollo CPm620 is a single-phase centrifugal pump designed for reliable and efficient transfer of clean water and non-chemically aggressive liquids. Its robust construction makes it suitable for a variety of domestic, civil, and agricultural applications, including water supply systems, pressure sets, irrigation, and liquid transfer.
Key features and application limits include:
- Skysčio tipas: Švarus vanduo
- Naudoja: Civil, Industrial, Agriculture
- Programos: Water Supply Systems, Air Conditioning Systems, Pressure Systems, Cooling Systems, Irrigation Pumps, Liquids Transfer
- Tipologija: Paviršiaus siurblys
- Temperature of the liquid: Nuo -10 °C iki +90 °C
- Aplinkos temperatūra: Nuo -10 °C iki +40 °C
- Manometric suction lift: Iki 7 metrų
- Maks. darbinis slėgis: 10 barų
2. Saugos informacija
Read all instructions carefully before installation and operation. Failure to follow these instructions may result in serious injury, property damage, or pump malfunction.
- Prieš atlikdami bet kokius montavimo, techninės priežiūros ar remonto darbus, visada atjunkite maitinimą.
- Ensure the electrical supply matches the pump's voltage and frequency requirements (110/220V, 60Hz).
- All electrical connections must be performed by a qualified electrician and comply with local codes.
- Install the pump in a well-ventilated area, protected from inclement weather, freezing temperatures, and direct sunlight.
- Do not pump flammable, corrosive, or explosive liquids. This pump is designed for clean water only.
- Veikiant siurbliui, vaikus ir neįgaliotus asmenis laikykite atokiau nuo jo.
- Užtikrinkite tinkamą įžeminimą, kad išvengtumėte elektros smūgio.
3. Sąranka ir diegimas
Tinkamas siurblio montavimas yra labai svarbus jo veikimui ir ilgaamžiškumui.
3.1 Vieta
Install the pump in an enclosed environment or at least sheltered from rain, snow, and direct sunlight. The ambient temperature should remain between -10 °C and +40 °C. Ensure adequate ventilation around the motor for cooling.
3.2 Montavimas
Securely mount the pump on a solid, level foundation to minimize vibration and noise. Use appropriate bolts and washers. Ensure the pump is easily accessible for maintenance.
3.3 Piping Connections
- Use pipes of adequate diameter to minimize friction losses.
- Siurbimo vamzdžio gale sumontuokite kojinį vožtuvą su filtru, kad į siurblį nepatektų šiukšlių ir būtų palaikomas užpildymas.
- Ensure all connections are airtight to prevent air leaks, which can cause loss of prime.
- Kad būtų lengviau prižiūrėti, įrenkite izoliacinius vožtuvus tiek įsiurbimo, tiek išleidimo linijose.
- Support piping independently to avoid placing stress on the pump casing.
3.4 Elektros prijungimas
Connect the pump to a dedicated electrical circuit with appropriate overcurrent protection. Verify the voltage (110V or 220V) and frequency (60Hz) match the pump's requirements. Ensure proper grounding according to local electrical codes.
3.5 Siurblio užpildymas
Before initial start-up, the pump casing and suction line must be completely filled with water. Open the priming plug (if available) or slowly fill the pump through the discharge port until water overflows. Close the plug securely before starting the pump.
4. Naudojimo instrukcijos
Follow these steps for safe and effective pump operation.
4.1 Pirminis paleidimas
- Įsitikinkite, kad siurblys tinkamai užpildytas.
- Open the discharge valve fully.
- Įjunkite siurblio maitinimą.
- Monitor the pump for unusual noises or vibrations. The pump should start smoothly and begin pumping water.
4.2 Normalus veikimas
During operation, periodically check for:
- Consistent water flow and pressure.
- Absence of excessive noise or vibration.
- No leaks from connections or the pump casing.
- Motor temperature (should not be excessively hot to the touch).
4.3 Išjungimas
- Uždarykite išleidimo vožtuvą.
- Išjunkite siurblio maitinimą.
- For extended periods of non-use or during freezing conditions, drain the pump and piping to prevent damage.
5. Priežiūra
Reguliarus siurblio aptarnavimas užtikrina optimalų veikimą ir prailgina jo tarnavimo laiką.
5.1 Įprastiniai patikrinimai
- Kas mėnesį: Inspect for leaks, unusual noises, or vibrations. Check electrical connections for signs of wear or corrosion.
- Kasmet: Inspect the impeller for wear or blockages. Check the mechanical seal for leaks. Clean any debris from the motor's cooling fins.
5.2 Žieminimas
If the pump is exposed to freezing temperatures, it must be drained completely to prevent damage from ice expansion. Disconnect power, open drain plugs, and remove any remaining water from the casing and pipes. Store in a dry, frost-free location if possible.
5.3 Valymas
Keep the exterior of the pump clean and free of dust and debris to ensure proper motor cooling.
6. Problemų sprendimas
Šiame skyriuje aptariamos dažniausiai pasitaikančios problemos, su kuriomis galite susidurti.
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Siurblys neįsijungia | No power; Blown fuse/tripped breaker; Motor overload; Seized impeller | Check power supply; Reset breaker/replace fuse; Allow motor to cool; Inspect impeller for obstructions. |
| Siurblys veikia, bet nėra vandens arba mažas srautas | Pump not primed; Air leak in suction line; Clogged foot valve/strainer; Impeller damage; Suction lift too high | Re-prime the pump; Check all suction connections for leaks; Clean foot valve/strainer; Inspect/replace impeller; Verify suction lift is within limits (max 7m). |
| Per didelis triukšmas ar vibracija | Cavitation (air in water); Misalignment; Worn bearings; Debris in pump | Ensure pump is fully primed and suction line is airtight; Check mounting and alignment; Contact qualified technician for bearing inspection; Clear any debris. |
| Siurblio nuotėkis | Loose connections; Damaged mechanical seal; Cracked casing | Tighten connections; Replace mechanical seal; Contact service for casing repair/replacement. |
7. Specifikacijos
Detailed technical specifications for the Pedrollo CPm620 Centrifugal Pump.
- Prekinis ženklas: Pedrollo
- Modelis: CPm620
- Arklio galia: 1.0 AG
- ttage: 110/220V
- Dažnis: 60 Hz
- Medžiaga: Stainless Steel (Material Type)
- Siurblio tipas: Išcentrinis
- Maksimalus siurbimo pakėlimas: 7 metrai
- Maksimalus darbinis slėgis: 10 barų
- Skysčio temperatūros diapazonas: -10 °C iki +90 °C
- Aplinkos temperatūros diapazonas: -10 °C iki +40 °C
- Spalva: Mėlyna
- UPC: 722777873525
8. Našumo duomenys
The following graph illustrates the characteristic curves and performance data for the Pedrollo CPm620 pump at 60 Hz with a rotational speed (n) of 3450 min-1 and a suction head (HS) of 0 meters. This data helps in understanding the pump's head (H) versus flow rate (Q) relationship under various operating conditions.
Image 1: Characteristic Curves and Performance Data for Pedrollo Centrifugal Pumps, including CPm620. The graph shows Head (H in meters) on the Y-axis against Flow rate (Q in l/min or m³/h) on the X-axis for different pump models.
9. Matmenys ir svoris
Refer to the diagram and table below for the physical dimensions and weight of the Pedrollo CPm620 pump. All dimensions are in millimeters (mm) and weights in kilograms (kg).
Image 2: Dimensional drawing of Pedrollo Centrifugal Pumps (side and front views) with a corresponding table listing dimensions (a, f, h, h1, h2, n, n1, w, s) and weight for various models, including CPm620.
For the CPm620 model (Single-phase), refer to the row labeled 'CPm 620' in the table within the image for specific dimensions and weight.
10. Garantija ir palaikymas
For warranty information, technical support, or service inquiries, please contact your authorized Pedrollo dealer or the point of purchase. Keep your purchase receipt and pump model information readily available when contacting support.
Always ensure that any repairs or servicing are carried out by qualified personnel using genuine Pedrollo spare parts to maintain warranty validity and ensure safe operation.