Who is the authorized agent for LAND products in Saudi Arabia, and where can I have my LAND LHP12160H pressure washer repaired?

Based on the available documentation for the LAND LHP12160H Electric Pressure Washer, there is no specific local agent or physical repair center listed for Saudi Arabia. The brand appears to primarily operate through online retail channels.To resolve your issue, please follow these steps:Contact Customer Support: The manual advises users to contact LAND customer service for technical support and warranty claims. You should check the documentation included in your original packaging for a specific support email or phone number.Amazon Support: Since the product is sold via the LAND Store on Amazon, you can contact the seller directly through your Amazon account under "Your Orders" to inquire about authorized service centers or replacement parts available in your region.Troubleshooting: If your machine is not working, refer to the troubleshooting section of the manual. Common fixes include checking the power supply/circuit breaker, cleaning the water inlet filter, or using the nozzle cleaning tool to clear debris from the spray tips.Local Repair: If the unit is out of warranty, most general electric tool repair shops can handle basic motor or pump issues, though specific proprietary parts may be difficult to source locally without contacting the manufacturer first.Always keep your purchase receipt as proof of purchase for any warranty-related inquiries.

The connection between the spray handle and the high-pressure hose on my LAND LHP12160H pressure washer will not stop leaking. I replaced the O-ring on the hose, but it still leaks. Is that the only washer in the connection?

For the LAND LHP12160H, the high-pressure hose connection typically relies on a single O-ring at the tip of the hose connector to create a seal inside the spray gun inlet. If you have already replaced this O-ring and the leak persists, please consider the following possibilities:Check for Debris or Damage: Inspect the inside of the spray gun's female connector. Even a small amount of grit, sand, or a hairline crack in the plastic housing can prevent the O-ring from seating properly.Verify O-ring Seating: Ensure the O-ring is seated in the specific groove on the hose end and is not being pinched or twisted when you insert it into the gun.Connection Tightness: The manual notes that the spray gun uses a "cross buckle" or quick-connect style connection. Ensure the locking mechanism is fully engaged and clicked into place. If it is a screw-on type, ensure it is tightened firmly by hand; however, the manual specifically mentions that brass connection adapters include built-in rubber gaskets to minimize leaks—check if your specific model uses an adapter between the hose and the handle that might require its own internal gasket.Lubrication: Applying a small amount of silicone grease (not petroleum jelly) to the O-ring can help it slide into the gun inlet without catching or tearing, ensuring a better seal.If the leak is coming from the handle itself rather than the junction point, the internal valve of the spray gun may be damaged, in which case the spray gun assembly would need to be replaced.

LAND LHP12160H Electric Pressure Washer User Manual

1. Įvadas

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your LAND LHP12160H Electric Pressure Washer. Please read this manual thoroughly before first use and retain it for future reference.

The LAND LHP12160H is an 1800W electric pressure washer designed for various cleaning tasks, generating up to 3000 PSI. It is suitable for cleaning surfaces such as houses, RVs, cars, decks, driveways, and garden equipment.

2. Saugos informacija

Naudodami elektros prietaisus, visada laikykitės pagrindinių saugos priemonių, kad sumažintumėte gaisro, elektros smūgio ir sužalojimo riziką.

Įsitikinkite, kad maitinimo šaltinis atitinka tūrįtage specified on the pressure washer.
Nenaudokite slėginio plovimo įrenginio lietuje arba šalia stovinčio vandens.
Dėvėkite tinkamas asmenines apsaugos priemones, įskaitant akių apsaugos priemones.
Niekada nenukreipkite purškimo pistoleto į žmones, naminius gyvūnus ar elektros lizdus.
Laikykite vaikus ir pašalinius asmenis toliau nuo darbo zonos.
Prieš atlikdami bet kokius priežiūros ar valymo darbus, atjunkite maitinimą.

3. Gaminio komponentai

Familiarize yourself with the main components of your LAND LHP12160H pressure washer.

LAND LHP12160H Pressure Washer and Accessories

1 paveikslas: Main unit, spray gun, high-pressure hose, and various nozzles.

Pagrindinis blokas: Contains the motor, pump, and detergent tank.
Purkštuvas: Rankinis prietaisas aukšto slėgio vandens srovei nukreipti.
Aukšto slėgio žarna: Connects the main unit to the spray gun (26 ft length).
Purkštukai: Interchangeable tips for different spray patterns and intensities. Includes 0°, 15°, 25°, 40°, Lotus/Turbo, and black soap nozzles.
Vandens įleidimo jungtis: For connecting a garden hose to the pressure washer.
Ratai: Kad įrenginį būtų lengva perkelti.

4. Sąranka ir surinkimas

Follow these steps to assemble and prepare your pressure washer for use.

Aukšto slėgio žarnos prijungimas: Connect one end of the high-pressure hose to the outlet on the main unit and the other end to the spray gun. Ensure connections are secure to prevent leaks.
Prijunkite vandens tiekimą: Attach a standard garden hose to the water inlet connector on the pressure washer. Ensure the water supply is turned on fully before starting the unit. The maximum water inlet temperature is 140°F (60°C).
Įdiekite antgalį: Select the desired nozzle (e.g., 25° for general cleaning) and insert it into the quick-connect collar on the spray gun wand. Pull back the collar, insert the nozzle, and release the collar to lock it in place.
Ploviklio bako pildymas (pasirinktinai): If using detergent, fill the built-in detergent tank with an appropriate pressure washer-safe cleaning solution.

Steps for connecting hose and nozzle to LAND pressure washer

2 paveikslas: Visual guide for connecting the high-pressure hose and installing nozzles.

5. Naudojimo instrukcijos

Norėdami saugiai ir efektyviai naudoti savo slėginę plovimo įrangą, atlikite šiuos veiksmus.

Maitinimas: Įjunkite maitinimo laidą į įžemintą elektros lizdą.
Išvalyti orą: Before turning on the unit, squeeze the trigger on the spray gun to allow water to flow through the system and purge any air. This helps protect the pump.
Paleiskite slėginę plovimo įrangą: Turn the power switch to the "ON" position. The motor will start, and the pump will build pressure.
Pradėkite valymą: Squeeze the trigger to start the high-pressure spray. Release the trigger to activate the Total Stop System (TSS), which automatically shuts off the pump to save energy and prolong its life.
Purškimo modelio reguliavimas: Change nozzles as needed for different cleaning tasks. Refer to the nozzle guide below.
Ploviklio naudojimas: To apply detergent, use the black soap nozzle. The pressure washer will automatically draw detergent from the tank at low pressure.
Išjungti: When finished, turn the power switch to "OFF," turn off the water supply, and squeeze the trigger to release any remaining pressure in the system. Disconnect the garden hose and power cord.

5.1 Nozzle Selection Guide

The LAND LHP12160H includes 6 function nozzles for various applications:

LAND Pressure Washer Nozzle Types and Spray Patterns

3 paveikslas: Illustration of different nozzle types and their corresponding spray patterns.

0° raudonas purkštukas: Pin-point jet stream for intense cleaning of small, stubborn spots. Use with extreme caution.
15° geltonas antgalis: Narrow, high-pressure spray for concentrated cleaning on hard surfaces.
25° žalias purkštukas: Vidutinio kampo purškiklis, skirtas bendram daugumos paviršių valymui.
40° baltas antgalis: Wide-angle spray for gentle cleaning of delicate surfaces or large areas.
Black Soap Nozzle: Low-pressure spray for applying detergents.
Lotus/Turbo Nozzle: Creates a rotating jet stream for powerful cleaning over a wider area, effective on tough stains.

LAND Pressure Washer in use for various cleaning tasks

4 paveikslas: Examples of the pressure washer being used for cleaning cars, patios, and other outdoor surfaces.

6. Priežiūra

Reguliarus valymas užtikrina optimalų slėginės plovyklos veikimą ir prailgina jos tarnavimo laiką.

Po kiekvieno naudojimo:
- Sistemą praplaukite švariu vandeniu, kad pašalintumėte visus ploviklio likučius.
- Nuvalykite įrenginio išorę su skelbimuamp audinys.
- Drain all water from the pump, hose, and spray gun to prevent freezing in cold weather.
Purkštukų valymas: If a nozzle becomes clogged, use the included nozzle cleaning tool (or a small wire) to clear any debris.
Saugykla: Store the pressure washer in a dry, frost-free location. Coil the high-pressure hose and power cord neatly. The unit features storage devices for the power cord, gun, and most accessories.

LAND Pressure Washer with storage features highlighted

5 paveikslas: The pressure washer unit highlighting its wheels for mobility and integrated storage for accessories.

7. Problemų sprendimas

Dažniausiai pasitaikančias problemas ir jų sprendimus rasite šiame skyriuje.

Problema	Galima priežastis	Sprendimas
Įrenginys neįsijungia.	Nėra maitinimo; suveikė grandinės pertraukiklis; sugedęs jungiklis.	Check power connection; reset circuit breaker; contact customer support.
Žemas slėgis.	Insufficient water supply; clogged nozzle; air in pump; leak in hose/connections.	Ensure water supply is fully open; clean nozzle; purge air by squeezing trigger; check all connections for leaks.
Iš jungčių teka vanduo.	Loose connections; worn O-rings/gaskets.	Tighten connections; replace O-rings/gaskets if damaged. The brass connection adapters include built-in rubber gaskets to minimize leaks.
Motor runs but no water sprays.	No water supply; clogged inlet filter; air in pump.	Check water supply; clean inlet filter; purge air from system.

8. Specifikacijos

Technical specifications for the LAND LHP12160H Electric Pressure Washer.

Modelis: LHP12160H
Maitinimo šaltinis: Su laidu elektra
Variklis: 1800W
Maksimalus slėgis: Iki 3000 PSI
Maksimalus srautas: 1.76 galono per minutę (GPM)
Žarnos ilgis: 26 pėdų
Maximum Water Inlet Temperature: 140 °F (60 °C)
Prekės svoris: 23.5 svaro
Gaminio matmenys: 11.6 colio ilgio x 10.9 colių pločio x 3.7 colio aukščio
Saugos sertifikatas: CSA
Savybės: Total Stop System (TSS), Built-in Detergent Tank, 6 Nozzle Types.

9. Garantija ir palaikymas

For warranty information or technical support, please refer to the documentation included with your purchase or contact LAND customer service. Keep your purchase receipt as proof of purchase.

Dėl papildomos pagalbos galite apsilankyti LAND Store on Amazon.

LAND LHP12160H