GODOX V860III-S

GODOX V860III-S Sony Camera Flash Instruction Manual

Model: V860III-S | Brand: GODOX

Įvadas

This manual provides detailed instructions for the safe and effective use of your GODOX V860III-S camera flash. Please read this manual thoroughly before use to ensure optimal performance and to prevent damage to the product or injury to yourself.

The GODOX V860III-S is a high-performance camera flash designed for Sony cameras, featuring advanced functions such as TTL auto flash, High-Speed Sync (HSS) up to 1/8000s, and a built-in 2.4G wireless X system. Its powerful lithium-ion battery ensures fast recycle times and extended shooting sessions.

Saugos informacija

Always observe basic safety precautions when using this product. Failure to do so may result in electric shock, fire, or injury.

  • Neardykite ir nemodifikuokite blykstės įrenginio.
  • Laikykite įrenginį sausą. Saugokite nuo lietaus ar drėgmės.
  • Nelieskite blykstės vamzdžio po įjungimo, nes jis gali būti karštas.
  • Laikyti vaikams nepasiekiamoje vietoje.
  • Naudokite tik nurodytą bateriją ir įkroviklį.
  • Avoid direct eye exposure to the flash, especially at close range.

Produktas baigtasview

The GODOX V860III-S is an advanced speedlight with a robust design and intuitive controls.

Pagrindinės funkcijos:

  • Blykstės režimai: Supports TTL auto flash, Manual flash, Multi-flash, Flash Exposure Compensation (FEC), Flash Exposure Lock (FEL), Front Curtain Sync, Rear Curtain Sync, and High-Speed Sync (HSS) up to 1/8000s.
  • Belaidė sistema: Integrated 2.4G wireless X system with a control range of up to 100 meters.
  • Priartinimo diapazonas: Automatic or manual zoom flash head from 20mm to 200mm for uniform illumination.
  • Baterijos našumas: High-capacity 7.2V / 2600mAh lithium-ion battery provides approximately 1.5-second recycle time and up to 450 full-power flashes. The battery is interchangeable with the Godox V1 series.
  • Modeliavimas L.amp: Built-in modeling lamp with 10 adjustable brightness levels for pre-visualization of lighting effects.
  • Quick Release Hot Shoe: Upgraded quick-install hot shoe for fast and secure mounting/dismounting.
  • Spartusis klavišas: Dedicated TTL/M shortcut button for quick switching between automatic and manual flash modes.
  • Lankstus galvos sukimasis: Flash head rotates horizontally 0-330° and vertically -7°-120° for versatile bounce and off-camera lighting.

Komponentai:

Familiarize yourself with the main parts of your GODOX V860III-S flash unit.

GODOX V860III-S front view with flash head and modeling lamp
1 pav.: priekis view of the GODOX V860III-S flash unit, showing the main flash head and the integrated modeling lamp.
GODOX V860III-S with wide panel and bounce card extended
Figure 2: GODOX V860III-S with the built-in wide panel and bounce card extended from the flash head.
GODOX V860III-S side view showing battery compartment and controls
3 pav.: šonas view of the GODOX V860III-S, highlighting the battery compartment and control buttons.
GODOX V860III-S mounted on a camera hot shoe, showing the LCD display and control panel
4 paveikslas: viršuje view of the GODOX V860III-S mounted on a camera, displaying the LCD screen and control buttons.

Sąranka

1. Akumuliatoriaus įkrovimas

The V860III-S uses a high-capacity lithium-ion battery. Before first use, fully charge the battery using the provided power adapter.

  1. Įdėkite bateriją į įkroviklį.
  2. Prijunkite įkroviklį prie maitinimo lizdo.
  3. The indicator light on the charger will show charging status (e.g., red for charging, green for fully charged).
Image showing the GODOX V860III-S battery and charger, highlighting battery performance
Figure 5: The V860III-S uses a high-performance lithium-ion battery, offering fast recycle times and numerous flashes per charge.

2. Baterijos įdėjimas

  1. Atidarykite baterijų skyriaus dangtelį, esantį blykstės įrenginio šone.
  2. Insert the charged lithium-ion battery, ensuring correct polarity.
  3. Saugiai uždarykite akumuliatoriaus skyriaus dangtelį.

3. Blykstės pritvirtinimas prie fotoaparato

The V860III-S features a quick-release hot shoe for easy attachment.

  1. Užmaukite blykstės įrenginį ant fotoaparato karštosios jungties jungties.
  2. Push the quick-release lock lever to secure the flash in place.
  3. To remove, push the quick-release lock lever and slide the flash off.

Naudojimo instrukcijos

1. Maitinimo įjungimas/išjungimas

To power on the flash, slide the ON/OFF switch to the "ON" position. To power off, slide it to "OFF".

2. Blykstės režimai

The V860III-S supports various flash modes. Use the REŽIMAS button to cycle through them or the dedicated TTL/M spartusis klavišas.

Close-up of the GODOX V860III-S control panel showing the TTL/M shortcut button
Figure 6: The dedicated TTL/M shortcut button allows for quick switching between automatic and manual flash modes.
  • TTL režimas: Automatic flash exposure control. The flash output is automatically adjusted based on the camera's metering.
  • Rankinis (M) režimas: Leidžia rankiniu būdu nustatyti blykstės galią nuo 1/1 iki 1/256.
  • Daugiafunkcis (stroboskopinis) režimas: Vienos ekspozicijos metu suveikia keletas greitų blyksnių, kad užfiksuotų kelis objekto judesius.

3. Didelės spartos sinchronizavimas (HSS)

HSS allows you to use flash at shutter speeds faster than your camera's native flash sync speed, enabling wider apertures in bright conditions or freezing fast motion.

  • Activate HSS through your camera's flash settings or the flash unit's menu.
  • The V860III-S supports HSS up to 1/8000s.

4. Modeliavimas Lamp

The integrated modeling lamp helps visualize the lighting effect before taking a shot.

  • Paspauskite modeliavimo lamp button (usually indicated by a light bulb icon) to turn it on/off.
  • Rotate the select dial to adjust the brightness across 10 levels.
Images demonstrating 10-level adjustable modeling lamp brightness and flash coverage at various focal lengths (20mm-200mm)
Figure 7: The modeling lamp offers 10 brightness levels. Also shown is the flash coverage from 20mm to 200mm.

5. Wireless Operation (2.4G Wireless X System)

The V860III-S can function as a master or slave unit in the Godox 2.4G wireless X system.

  1. Setting as Master/Slave: Access the wireless settings in the flash menu to set the unit as a master (transmitter) or slave (receiver).
  2. Channel and Group: Ensure the master and slave units are set to the same channel and group for proper communication.
  3. Diapazonas: The wireless system has a maximum control distance of approximately 100 meters.
Diagram illustrating Godox 2.4G wireless system compatibility with various transmitters and receiver flashes
Figure 8: The GODOX V860III-S is compatible with other Godox 2.4G wireless X system devices, functioning as both a transmitter and receiver.

6. Blykstės galvutės sukimas

Blykstės galvutę galima pasukti ir pakreipti, kad būtų galima nukreipti šviesą atspindėtai blykstei arba kūrybiniam apšvietimui.

  • Horizontal rotation: 0° to 330°.
  • Vertical tilt: -7° to 120°.

Priežiūra

  • Valymas: Blykstės įrenginį valykite minkšta, sausa šluoste. Įsisenėjusiam purvui valyti naudokite šiek tiek drėgną šluostę.amp cloth with mild detergent, then wipe dry. Do not use organic solvents like thinner or benzene.
  • Akumuliatoriaus priežiūra: Store the battery in a cool, dry place when not in use. If storing for extended periods, charge the battery to about 50% every 3 months to prolong its lifespan.
  • Saugykla: When not in use, store the flash unit in a protective case in a dry, dust-free environment.

Trikčių šalinimas

ProblemaGalima priežastisSprendimas
Blykstė nesuveikia.
  • Baterija išsikrovusi arba jos įkrova maža.
  • Blykstė nėra tvirtai pritvirtinta.
  • Blykstė veikia miego režimu.
  • Incorrect camera/flash settings.
  • Įkraukite arba pakeiskite akumuliatorių.
  • Įsitikinkite, kad blykstė tinkamai įdėta ir užfiksuota karštosios jungties jungtyje.
  • Norėdami pažadinti blykstę, paspauskite bet kurį mygtuką.
  • Check camera and flash mode settings (e.g., TTL, M, HSS).
Blykstės galia nepastovi.
  • Baterija išsikrovusi.
  • Flash head zoom setting is incorrect.
  • Subject distance is too far.
  • Įkraukite akumuliatorių.
  • Adjust zoom to match lens focal length or set to auto.
  • Move closer to the subject or increase flash power.
Belaidis paleidiklis neveikia.
  • Neteisingi kanalo / grupės nustatymai.
  • Per didelis atstumas arba yra kliūčių.
  • Master/slave mode incorrectly set.
  • Verify all units are on the same channel and group.
  • Sumažinkite atstumą arba užtikrinkite aiškų matomumą.
  • Ensure master and slave units are set correctly.

Specifikacijos

FunkcijaDetalė
Prekės ženklasDIEVAS
ModelisV860III-S
Suderinamas laikiklisSony Hot Shoe Mount
Blykstės tipasExternal Camera Flash (Speedlight)
Vadovo skaičius (GN)60 (m ISO100)
Flash sinchronizavimo greitisIki 1/8000 s (HSS)
Belaidis ryšys2.4G Wireless (Built-in)
Baterija1x 7.2V / 2600mAh Lithium-Ion Battery (Included)
Perdirbimo laikasApprox. 1.5 seconds (Full Power)
Pilna galia mirksiApprox. 450
Mastelio diapazonas20–200 mm (automatinis / rankinis)
Blykstės galvutės sukimasHorizontalus: 0–330°, vertikalus: -7–120°
Modeliavimas L.ampYes, 10 adjustable levels
Įtraukti komponentaiFlash unit, Lithium-Ion Battery, Power Adapter

Garantija ir palaikymas

This GODOX product comes with a 6 mėnesių garantija nuo įsigijimo datos. Ši garantija taikoma gamybos defektams ir gedimams įprasto naudojimo metu.

The warranty does not cover damage caused by misuse, unauthorized modification, accident, or natural disaster. Please retain your proof of purchase for warranty claims.

For technical support, service, or warranty claims, please contact your authorized GODOX dealer or visit the official GODOX websvetainė kontaktinei informacijai.

© 2026 GODOX. Visos teisės saugomos.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.