WOLFBOX T10 Plus/T10

WOLFBOX T10 Plus/T10 Mirror Dash Cam Hardwire Kit Instruction Manual

Model: T10 Plus/T10 Hardwire Kit

1. Produktas baigtasview

The WOLFBOX Hardwire Kit is designed to provide continuous power to your WOLFBOX T10 Plus/T10 Mirror Dash Cam, enabling 24/7 parking surveillance and eliminating the need for a cigarette lighter adapter. This kit is compatible with vehicles operating on 12V to 24V systems.

  • Platus suderinamumas: Connects directly to your vehicle's power system, supporting 12V to 24V input, suitable for cars, trucks, buses, and SUVs.
  • Visą parą veikianti automobilių stovėjimo aikštelės stebėjimo sistema: Provides constant power to your dash cam, allowing it to monitor your vehicle even when the engine is off, protecting against theft and incidents in parking lots.
  • Ignition-Controlled Power: Can be wired to an ignition-switched fuse for power that turns on and off with your vehicle, ensuring automatic operation without manual intervention.
  • Mini USB Plug: Compatible with all Mini USB dash cams, GPS navigators, and radar detectors, freeing up your vehicle's cigarette lighter port.
  • Žemas tomastage Apsauga: Features a smart system that automatically cuts power to the dash cam if your vehicle's battery voltage drops below 11.6V (for 12V systems) or 22.8V (for 24V systems), preventing battery drain.
Diagram showing the internal structure of the hardwire kit cable, detailing flexible TPE jacket, tinned copper braid and aluminum foil shield, bulletproof aramid fiber, thick 23 AWG power wire, and thick 26 AWG data wire.

Figure 1: Internal Cable Structure of the Hardwire Kit

2. Sąranka ir diegimas

2.1 Saugos priemonės

Before beginning the installation, ensure the vehicle's engine is off. Disconnect the negative terminal of the vehicle's battery to prevent short circuits or electrical damage during installation.

2.2 Komponentaiview

The hardwire kit includes the main power cable with a Mini USB connector, a voltage converter box, and various fuse tap sizes to match your vehicle's fuse box.

Image showing four different fuse tap sizes: Medium, Small, Mini, and Micro, with corresponding fuses. Text indicates to insert the same size fuse into the top slot of the fuse tap.

Figure 2: Included Fuse Tap Sizes

2.3 Laidų prijungimo schema

Refer to the diagram below for a visual guide on connecting the hardwire kit to your vehicle's fuse box.

Wiring diagram for the hardwire kit. It shows the dash cam connected via Mini USB to the power cord. The power cord connects to a voltage converter. From the converter, a red accessory wire connects to an ACC fuse (2A) in the fuse box, which is powered with the engine key. A yellow battery cord connects to a BATT fuse in the fuse box, which is always powered. A black earth cord connects to a metal part of the fuse box for ground. A warning states to disconnect the negative battery terminal before connecting.

Figure 3: Hardwire Kit Wiring Diagram

2.4 Žingsnis po žingsnio diegimas

  1. Prisijunkite prie Dash Cam: Plug the Mini USB end of the hardwire kit into your WOLFBOX dash cam.
  2. Saugiklių dėžutės suradimas: Identify your vehicle's fuse box. This is typically located under the dashboard, in the glove compartment, or in the engine bay. Consult your vehicle's owner's manual if needed.
  3. Connect Constant Power (Yellow Cable): The yellow cable (BATT) provides constant power. Locate a fuse in your vehicle's fuse box that is always live, even when the ignition is off. Use an appropriate fuse tap from the kit to connect the yellow cable to this fuse slot. Ensure you insert the original fuse and a new fuse (if provided) into the fuse tap.
  4. Connect Ignition-Switched Power (Red Cable): The red cable (ACC) provides power only when the ignition is on. Locate a fuse in your vehicle's fuse box that receives power only when the ignition is turned on. Use an appropriate fuse tap to connect the red cable to this fuse slot.
  5. Connect Ground (Black Cable): The black cable (GND) is for grounding. Connect this cable to a metal part of the vehicle's chassis or a bolt that is securely fastened to the vehicle's metal frame. This provides a stable ground connection.
  6. Maršruto kabeliai: Carefully route all cables to conceal them and prevent interference with driving. Use cable clips or ties to secure them.
  7. Iš naujo prijunkite akumuliatorių: Once all connections are secure, reconnect the negative terminal of your vehicle's battery.
  8. Bandymo sistema: Start your vehicle and check if the dash cam powers on. Turn off the ignition and observe if the parking surveillance mode activates (if applicable to your dash cam model).
Three-step installation guide for the hardwire kit. Step 1: Yellow cable connects to a constant power fuse in the car fuse box. Step 2: Red wire connects to the ACC fuse slot and the yellow wire to the constant fuse slot. Step 3: Black cable (GND) connects to a metal part of the vehicle.

Figure 4: Hardwire Kit Installation Steps

3. Operacija

Once installed, the WOLFBOX Hardwire Kit operates automatically based on your wiring configuration and dash cam settings.

3.1 Parkavimo stebėjimas

When the vehicle's ignition is turned off, the hardwire kit continues to supply power to the dash cam from the constant power connection (yellow cable). This enables your dash cam's parking surveillance features, such as motion detection or time-lapse recording, to function continuously.

3.2 Žemas tomastage Apsauga

The hardwire kit is equipped with a low voltage protection system. If your vehicle's battery voltage drops to 11.6V (for 12V systems) or 22.8V (for 24V systems), the kit will automatically cut power to the dash cam. This prevents excessive discharge of your vehicle's battery, ensuring you can start your engine. Power will resume once the battery voltage grįžta į saugų lygį.

4. Priežiūra

The WOLFBOX Hardwire Kit requires minimal maintenance. Periodically check the connections to ensure they remain secure and free from corrosion. Ensure cables are not pinched or exposed to excessive heat or moisture. If you notice any issues with power supply to your dash cam, inspect the fuse connections and the ground point.

5. Problemų sprendimas

  • Vaizdo registratorius neįsijungia:
    • Verify all connections (Mini USB, ACC, BATT, GND) are secure.
    • Check the fuses in the fuse taps. Replace any blown fuses.
    • Įsitikinkite, kad automobilio akumuliatoriaus įtampatage yra virš mažo tūriotage protection threshold (11.6V for 12V, 22.8V for 24V).
  • Parkavimo stebėjimo sistema neveikia:
    • Confirm the yellow (BATT) cable is connected to a constant power fuse that is always live.
    • Check your dash cam's settings to ensure parking surveillance mode is enabled.
  • Incorrect Fuse Tap Size:
    • The kit includes multiple fuse tap sizes. Ensure you are using the correct size for your vehicle's fuse box.
    • If your vehicle requires a fuse type not included, you may need to purchase an additional compatible fuse tap separately.
  • Dash Cam Turns Off Unexpectedly:
    • Tai gali būti dėl mažo tūriotage protection activating. Check your vehicle's battery voltage. If it's low, the kit will cut power to protect the battery.

6. Specifikacijos

Prekės ženklasVILKO DĖŽĖ
ModelisT10 Plus/T10 Hardwire Kit
Ryšio technologijaUSB
Ypatinga funkcijaParking Monitor, Low Voltage Apsauga
Transporto priemonės paslaugos tipasAutomobilis, Sunkvežimis
Įvesties tomastage12 V–24 V
Žemas tomastage Cut-off (12V system)11.6 V
Žemas tomastage Cut-off (24V system)22.8 V
Prekės svoris7 uncijos
Pakuotės matmenys5.98 x 4.53 x 2.36 colio

7. Garantija ir palaikymas

WOLFBOX is committed to providing high-quality products and customer satisfaction.

  • Garantija: Šiam gaminiui suteikiama 12 mėnesių garantija.
  • Grąžinimo politika: A 7-day return policy is applicable.
  • Defektai: Grąžinimai priimami dėl defektų.

For technical assistance, warranty claims, or any product-related inquiries, please contact WOLFBOX customer support:

Image showing WOLFBOX customer service information, including 12 months warranty, 7 days return policy, return on defects, email service@wolfbox.com, and phone number +1 888 296 8399.

Figure 5: WOLFBOX Warranty and Service Information

© 2023 WOLFBOX. Visos teisės saugomos.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.