KOLINK PGW-AC-KOL-042

Kolink RGB Extension Cable - 50cm User Manual

Model: PGW-AC-KOL-042

1. Įvadas

This manual provides instructions for the proper installation, operation, and maintenance of your Kolink RGB Extension Cable. Please read this manual thoroughly before use to ensure safe and efficient operation.

The Kolink RGB Extension Cable is designed to extend the reach of your 4-pin RGB lighting connections within your PC system, offering greater flexibility for component placement and aesthetic customization.

2. Saugos informacija

  • Ensure your PC system is powered off and unplugged from the wall outlet before installing or removing any components.
  • Handle the cable by its connectors, not by the wires, to prevent damage.
  • Do not expose the cable to excessive force, sharp objects, or extreme temperatures.
  • This product is intended for indoor use within a computer chassis.
  • Verify that the connector type (4-pin RGB) matches your devices before connection. Incorrect connection may cause damage.

3. Pakuotės turinys

Jūsų pakuotėje turėtų būti šis elementas:

  • 1x Kolink RGB Extension Cable (50cm)
Kolink RGB Extension Cable, 50cm length, black, with 4-pin male and female connectors

1 paveikslas: Kolink RGB Extension Cable. This image shows the 50cm black extension cable with its 4-pin male and female connectors, designed for extending RGB lighting connections within a PC.

4. Sąranka ir diegimas

  1. Išjungimo sistema: Ensure your computer is completely powered off and disconnected from the main power supply.
  2. Identifikuokite jungtis: Locate the 4-pin RGB header on your motherboard or existing RGB controller, and the 4-pin RGB connector on the device you wish to extend (e.g., an RGB fan or LED strip).
  3. Connect Extension Cable: Atsargiai prijunkite vyriškas end of the Kolink RGB Extension Cable to the moteriška 4-pin RGB header on your motherboard or controller. Ensure the pins align correctly and the connection is secure.
  4. Prijunkite įrenginį: Prijunkite moteriška end of the Kolink RGB Extension Cable to the vyriškas 4-pin RGB connector of your RGB device. Again, ensure correct pin alignment and a secure connection.
  5. Kabelių valdymas: Route the cable neatly within your PC case, ensuring it does not obstruct airflow or interfere with moving parts like fans. The tangle-free design assists with this.
  6. Įjungimo sistema: Once all connections are secure, close your PC case, reconnect the power supply, and power on your system.

5. Operacija

The Kolink RGB Extension Cable functions as a passive extension for your 4-pin RGB signals. Once connected, the RGB device will operate as if it were directly connected to the motherboard or controller, allowing you to control its lighting effects through your system's existing RGB software or hardware controls.

No additional software or drivers are required for the cable itself.

6. Priežiūra

  • Valymas: If necessary, gently wipe the cable with a dry, lint-free cloth to remove dust. Do not use liquid cleaners.
  • Patikra: Periodiškai apžiūrėkite kabelį, ar nėra susidėvėjimo, nutrynimo ar jungčių pažeidimų. Jei pastebėsite pažeidimų, nebenaudokite ir pakeiskite kabelį.
  • Saugykla: When not in use, store the cable in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid sharp bends or kinks.

7. Problemų sprendimas

ProblemaGalima priežastisSprendimas
RGB device not lighting up.Loose connection, incorrect pin alignment, or faulty RGB device/controller.Ensure all 4-pin connections are secure and correctly aligned. Verify the RGB device works when connected directly. Check motherboard/controller settings.
Neteisingos spalvos arba mirgėjimas.Loose connection, software issue, or incompatible RGB standard.Check connections. Update or reinstall RGB control software. Ensure your device uses the 4-pin 12V RGB standard (not 3-pin 5V ARGB).
Kabelis atrodo pažeistas.Fizinė žala.Discontinue use immediately. Replace the cable.

8. Specifikacijos

  • Prekinis ženklas: koli
  • Modelis: PGW-AC-KOL-042
  • Kabelio tipas: RGB Extension Cable
  • Jungties tipas: 4-pin RGB (Male-to-Female)
  • Ilgis: 50 cm
  • Smeigtukų skaičius: 4
  • Maksimalus tūristage: 5 volto (DC) (Note: Standard 4-pin RGB is typically 12V. Users should verify their device's voltage requirement to ensure compatibility.)
  • Ypatinga funkcija: Susipainiojimas nemokamai
  • Rekomenduojami naudojimo būdai: PC fan extension, RGB lighting extension
  • Spalva: Juoda
  • Atitiktis: RoHS

9. Garantija ir palaikymas

Kolink products are manufactured to high-quality standards. For warranty information and technical support, please refer to the official Kolink websvetainėje arba susisiekite su pardavėju. Išsaugokite pirkimo įrodymą, jei prireiktų pateikti garantinį prašymą.

ES atsarginių dalių tiekimo trukmė: 1 metai (pagal produkto specifikacijas).

© 2024 KOLINK. Visos teisės saugomos.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.