Hama 00118498

Hama 00118498 Monitor Desk Mount Instruction Manual

Modelis: 00118498

Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of your Hama 00118498 Monitor Desk Mount. Designed to enhance your ergonomic workspace, this monitor arm allows for flexible positioning of your display, promoting a comfortable and productive environment. Please read these instructions carefully before beginning installation.

Sąrankos instrukcijos

Follow these steps to correctly install your Hama 00118498 Monitor Desk Mount.

1. Stalo laikiklio pritvirtinimasamp

  1. Padėkite stalą klamp assembly onto the edge of your desk. Ensure the desk surface is sturdy and can support the weight of the mount and your monitor.
  2. Priveržkite klipąamp Tvirtai prisukite, kol laikiklis bus tvirtai pritvirtintas prie stalo. Neperveržkite.
Close-up of the Hama monitor arm desk clamp mechanizmas

Image: The desk clamp mechanism, showing how it attaches to the desk edge for secure mounting.

2. Monitoriaus prijungimas

  1. Ensure your monitor is VESA compatible (100x100mm or 75x75mm).
  2. Carefully attach the VESA plate from the monitor arm to the back of your monitor using the provided screws. Make sure the screws are tightened securely.
  3. Slide the monitor (with the attached VESA plate) onto the arm's mounting head. Ensure it clicks into place or is secured with any locking mechanism provided.
Hama monitor arm showing the VESA plate and adjustable joint

Image: The monitor arm's VESA plate and adjustable joint, ready for monitor attachment.

Šoninė view of the Hama monitor arm with cable management and VESA mount

Paveikslėlis: Šoninė pusė view of the assembled monitor arm, highlighting the VESA mount and integrated cable management channels.

3. Kabelių valdymas

Utilize the integrated cable management system to route your monitor cables neatly along the arm. This helps maintain a tidy workspace and prevents cable clutter.

Naudojimo instrukcijos

The Hama 00118498 Monitor Desk Mount offers various adjustment options for optimal viewkomfortas.

  • Aukščio reguliavimas: The integrated pneumatic spring allows for smooth and effortless vertical height adjustment. Gently push or pull the monitor to your desired height.
  • Sukamasis: The arm can swivel horizontally, allowing you to rotate your monitor to share your screen or change your viewing kampas.
  • Pakreipti: Adjust the monitor's tilt angle (up or down) to reduce glare and find the most comfortable viewpadėtis.
  • Pasukimas: Rotate your monitor from landscape to portrait orientation as needed for different tasks.

Adjustments should be smooth. If the monitor does not hold its position, refer to the troubleshooting section for tension adjustments.

Priežiūra

Reguliarus techninis aptarnavimas užtikrina monitoriaus laikiklio ilgaamžiškumą ir optimalų veikimą.

  • Valymas: Wipe the surface of the monitor arm with a soft, damp audinys. Nenaudokite abrazyvinių valiklių ar tirpiklių.
  • Patikrinkite jungtis: Periodiškai patikrinkite visus varžtus ir jungtis, kad jie būtų tvirtai priveržti. Jei reikia, priveržkite.
  • Tepimas: The pneumatic spring is maintenance-free. Do not attempt to lubricate internal components.

Trikčių šalinimas

If you encounter issues with your Hama 00118498 Monitor Desk Mount, refer to the following common problems and solutions:

  • Monitorius nusmukęs arba neišlaikęs pozicijos: The tension of the pneumatic spring may need adjustment. Locate the tension adjustment screw (usually found on the arm joint) and turn it clockwise to increase tension for heavier monitors, or counter-clockwise for lighter monitors. Adjust gradually until the monitor holds its position.
  • Monitorių sunku perkelti: If the arm is too stiff, the tension may be too high. Turn the tension adjustment screw counter-clockwise to decrease tension.
  • Arm Feels Loose on Desk: Užtikrinkite, kad stalas klamp is fully tightened. If the desk surface is too thin or fragile, consider adding a protective pad between the clamp and the desk.
  • Monitoriaus virpesiai: Check all mounting screws on the VESA plate and the arm joints to ensure they are securely fastened.

Specifikacijos

Funkcija Detalė
Modelio numeris 00118498
Montavimo tipas Stalas Clamp
Judėjimo tipas Rotating, Swivel, Tilt, Height Adjustable (Pneumatic Spring)
Prekės ženklas Hama
Medžiaga Aliuminis
Spalva Juoda
Suderinami įrenginiai Monitorius
Minimalus suderinamas dydis 10 colių
Maksimalus suderinamas dydis 32 colių
Prekės svoris 2.2 kilogramo
Kilmės šalis Kinija

Garantija ir palaikymas

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Hama websvetainė. Paprastai ten galite rasti palaikymo komandos kontaktinę informaciją, DUK ir papildomų išteklių.

Oficialus Hama Websvetainė: www.hama.com

© 2023 Hama. Visos teisės saugomos.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.