1. Įvadas
This manual provides detailed instructions for the ANBERNIC RG351MP Handheld Game Console. Please read this manual thoroughly before using the device to ensure proper operation and to maximize your gaming experience. Keep this manual for future reference.
2. Saugos informacija
- Nelaikykite prietaiso ekstremaliose temperatūrose, tiesioginiuose saulės spinduliuose ar didelėje drėgmėje.
- Stenkitės, kad prietaisas nenumestų ar nepatirtų stipraus smūgio.
- Saugokite prietaisą nuo vandens ir kitų skysčių.
- Nebandykite patys ardyti ar taisyti įrenginio. Pagalbos kreipkitės į įgaliotąjį techninės priežiūros personalą.
- Naudokite tik pridedamą įkrovimo laidą ir adapterį.
- Naudojimo ir įkrovimo metu užtikrinkite tinkamą vėdinimą.
- This product contains a Lithium Polymer battery. Dispose of batteries responsibly according to local regulations.
3. Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:
- 1 x RG351MP Game Console
- 1 x WIFI Module
- 1 x 64G SD Card
- 1x USB įkrovimo laidas
- 1 x Vartotojo vadovas
- 1x ekrano apsauga
- 1 x Wipes
4. Produktas baigtasview
Familiarize yourself with the various components and controls of your ANBERNIC RG351MP console.
4.1 pav.: priekis View. This image displays the front of the ANBERNIC RG351MP console, featuring the 3.5-inch IPS screen, D-pad, action buttons (X, Y, A, B), SELECT and START buttons, and dual analog joysticks.
Figure 4.2: Console Layout. This image provides various angles of the console, highlighting the L1/L2/R1/R2 shoulder buttons, OTG and DC ports on the top, volume controls on the side, and TF/EXT, Reset, and TF2/EXT slots on the bottom.
4.3 pav.: Nugara View. The rear of the console is shown, displaying the ANBERNIC logo, model number RG351MP, and regulatory markings. This view also indicates the location of the internal Li-Po battery.
Figure 4.4: Screen Display. This image emphasizes the console's 3.5-inch IPS screen with OCA full lamination and 640x480 resolution, providing a clear visual experience.
5. Sąranka
5.1 Įrenginio įkrovimas
Before initial use, fully charge the console. Connect the provided USB charging cable to the DC port on the top of the console and the other end to a compatible USB power adapter (maximum load 2A). A full charge typically takes approximately 4 hours.
5.2 TF kortelės įdėjimas
The console supports dual TF card slots. The primary TF1/EXT slot is for the operating system and pre-installed games. The TF2/EXT slot can be used to expand storage up to 256GB for additional games.
- Locate the TF1/EXT slot on the bottom of the console.
- Gently insert the pre-installed 64GB TF card into the slot until it clicks into place.
- If using an additional TF card for games, insert it into the TF2/EXT slot.
Figure 5.1: TF Card Insertion. This image illustrates the process of inserting a TF card into the console's expansion slot, demonstrating how to properly seat the card.
5.3 Įjungimas / išjungimas
- Norėdami įjungti: Press and hold the Power button (located on the side) for a few seconds until the screen illuminates.
- Norėdami išjungti: Press and hold the Power button until the power-off menu appears, then select "Shutdown" or "Power Off". Alternatively, a quick press of the Power button may put the device into sleep mode, depending on system settings.
5.4 Connecting the WIFI Module
The console supports an external WIFI module for network connectivity. Insert the provided WIFI module into one of the OTG USB ports (located on the top of the console). Once connected, you can configure network settings within the system menu.
6. Naudojimo instrukcijos
6.1 Pagrindinė navigacija
- D-pad / Analog Joysticks: Use these to navigate through menus and control in-game characters.
- Mygtukas: Confirm selection or perform primary action.
- B mygtukas: Go back or perform secondary action.
- X / Y Buttons: Perform specific in-game actions as defined by the game.
- START mygtukas: Pause game, open in-game menus, or confirm selections.
- SELECT mygtukas: Access system menus or perform specific in-game functions.
- L1/L2/R1/R2 Buttons: Shoulder buttons for various in-game controls.
6.2 Game Selection and Launching
From the main menu, navigate to the desired game system (e.g., PS1, GBA, NES). Select a game from the list using the D-pad or analog stick and press the A button to launch it.
6.3 Saving and Loading Game States
Most emulators support "save states" which allow you to save your progress at any point in a game, independent of the game's internal save system. Refer to the specific emulator's hotkey combinations (often a combination of SELECT + L1/R1 or similar) for saving and loading states.
6.4 Sistemos nustatymai
Access the system settings menu (usually via the SELECT button or a dedicated menu option) to adjust:
- Kalba: Change the system language.
- Ekranas: Adjust screen brightness, aspect ratio, and video filters.
- Garsas: Control volume levels and audio output.
- Tinklas: Configure Wi-Fi settings (requires external Wi-Fi module).
- Valdiklio nustatymai: Map buttons or calibrate joysticks.
6.5 Adding New Games
To add new games, you will need to transfer game ROMs to the TF2/EXT card. Ensure the ROMs are in a format supported by the console's emulators. Connect the TF2/EXT card to a computer using a card reader and copy the game files to the appropriate system folders on the card. After reinserting the card into the console, refresh the game list in the system menu.
7. Priežiūra
7.1 Prietaiso valymas
Use a soft, dry, lint-free cloth to clean the console's exterior. For the screen, use a screen-specific cleaning solution and a microfiber cloth. Do not use abrasive cleaners or solvents.
7.2 Akumuliatoriaus priežiūra
- Venkite dažnai visiškai iškrauti akumuliatorių.
- Laikykite prietaisą vėsioje, sausoje vietoje, kai jo ilgesnį laiką nenaudojate.
- Jei prietaisas ilgą laiką nebus naudojamas, prieš sandėliavimą įkraukite jį maždaug iki 50 %.
7.3 Programinės įrangos naujiniai
Periodically check the official ANBERNIC website or community forums for firmware updates. Updates can improve performance, add features, or fix bugs. Follow the provided instructions carefully when performing any software updates.
8. Problemų sprendimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Įrenginys neįsijungia. | Low battery; TF card not properly inserted; System crash. | Charge the device for at least 30 minutes. Ensure TF1/EXT card is correctly inserted. Press the Reset button (located on the bottom of the console) with a thin object. |
| Games are not loading or crashing. | Corrupt game file; Incorrect emulator settings; TF card issue. | Patvirtinti žaidimą file integrity. Check emulator settings (e.g., core, video driver). Reinsert or try a different TF card. |
| Ekranas tuščias arba mirga. | Software issue; Hardware malfunction. | Paleiskite įrenginį iš naujo. Jei problema išlieka, susisiekite su klientų aptarnavimo tarnyba. |
| Nėra garso. | Volume too low; Muted; Headphone jack issue. | Increase volume using the side buttons. Check system sound settings. Ensure no headphones are partially inserted. |
9. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelis | RG351MP |
| Medžiaga | Aluminum alloy shell, CNC process |
| Ekranas | 3.5 inch IPS screen, OCA full lamination, 640*480 resolution |
| CPU | RK3326 quad core 1.5 GHz |
| GPU | Mali-G31 MP2 |
| RAM | DDR3L 1GB |
| Vidinė atmintis | 16GB (for system) |
| Sistema | Open source Linux system |
| Žaidimų palaikymas | Vibrating motor, supports 20+ game formats. Users can download relevant game formats. |
| Pranešėjas | High quality double horn stereo speaker |
| Baterija | Li-polymer 3500 mAh, lasting approximately 6 hours |
| Įkrovimas | 1.3A charging, matching maximum load 2A, USB charging cable, 4 hours for full charge |
| TF kortelių palaikymas | Supports TF card max to 256GB (dual TF card slots) |
| Kitos Funkcijos | Support external network card WIFI, Double OTG, Double 3D rocker, Support 3.5mm stereo earphones. |
| Matmenys | 6.6 x 3.8 x 1.9 colio (paketo matmenys) |
| Prekės svoris | 15.2 uncijos |
10. Garantija ir palaikymas
10.1 Informacija apie garantiją
ANBERNIC products are covered by a limited warranty. Please refer to the warranty card included in your package or visit the official ANBERNIC webIšsamias garantijos sąlygas ir nuostatas rasite svetainėje. Išsaugokite pirkimo įrodymą, jei prireiktų pateikti garantijos pretenzijas.
10.2 Pagalba klientams
If you encounter any issues or have questions not covered in this manual, please contact ANBERNIC customer support. You can usually find contact information on the official ANBERNIC websvetainėje arba per pardavėją, iš kurio įsigijote produktą.