BLAUX Cleanse Bidet Attachment Instruction Manual

1. Produktas baigtasview

The BLAUX Cleanse Bidet Attachment is a non-electric bidet system designed to enhance personal hygiene. It features adjustable water pressure and dual nozzles for both front and rear cleansing, providing a refreshing and thorough wash. Constructed from durable ABS plastic, this attachment is designed for easy installation on most standard toilets.

BLAUX Cleanse Bidet Attachment installed on a toilet, showing the control knob and dual nozzles.

Image 1.1: BLAUX Cleanse Bidet Attachment installed on a toilet.

2. Kas yra dėžutėje

Prieš pradėdami montavimą, įsitikinkite, kad yra visi komponentai:

BLAUX Cleanse Bidet Attachment Unit
1x T formos adapteris
1x Water Hose
Mounting Plates/Fastening Slots

Contents of the BLAUX Cleanse Bidet Attachment box, including the bidet unit, T-adapter, water hose, and mounting plates.

Image 2.1: All components included in the BLAUX Cleanse Bidet Attachment package.

3. Sąranka ir diegimas

Installation of the BLAUX Cleanse Bidet Attachment is designed to be straightforward and does not require electricity. Basic tools such as a Philips screwdriver, an adjustable wrench, and plumber's tape are recommended.

3.1. Paruošimas

Turn off the water supply to your toilet at the shut-off valve.
Nuplaukite tualetą, kad ištuštintumėte baką.
Atjunkite esamą vandens tiekimo žarną nuo tualeto bakelio.

3.2. Attaching the Bidet Unit

Remove your existing toilet seat by unscrewing the bolts that secure it to the toilet bowl.
Place the bidet attachment onto the toilet bowl, aligning the fastening slots with the toilet seat bolt holes.
Reinstall your toilet seat over the bidet attachment and secure it with the original bolts. Ensure the bidet unit is centered and stable.

Diagram showing the simple setup process of the bidet attachment on a toilet, highlighting the tools needed: Philips screwdriver, adjustable wrench, and plumber's tape.

Image 3.1: Super simple setup diagram for the bidet attachment.

3.3. Vandens tiekimo prijungimas

Install the T-adapter onto the toilet tank's water inlet.
Connect one end of the provided water hose to the T-adapter.
Connect the other end of the water hose to the bidet attachment's water inlet.
Slowly turn on the water supply to the toilet. Check for any leaks. If leaks occur, tighten connections as needed.

Video 3.1: Official installation guide for the BLAUX Cleanse Bidet Attachment, demonstrating the steps to connect the unit to your toilet's water supply.

3.4. Suderinamumas

The BLAUX Cleanse Bidet Attachment is designed to fit most standard toilets. The fastening slots are adjustable to accommodate various bolt spacing, with a maximum length of 9.0 inches (23 cm).

Diagram illustrating the dimensions and compatibility requirements for the BLAUX Cleanse Bidet Attachment on a toilet, showing minimum and maximum measurements.

Image 3.2: Bidet attachment dimensions and toilet compatibility guide.

4. Naudojimo instrukcijos

The bidet features a single control knob for easy operation of its dual nozzles and water pressure settings.

4.1. Nozzle Selection and Water Pressure

Galinis plovimas: Turn the control knob to activate the rear nozzle for general cleansing.
Moteriškas skalbimas: Turn the control knob in the opposite direction to activate the feminine nozzle for a gentler, front wash.
Slėgio reguliavimas: Continue turning the knob in either direction to increase the water pressure from soft to strong.

Close-up of the bidet attachment showing the dual nozzles (feminine and rear) and the adjustable water pressure feature.

Image 4.1: Dual nozzles for deep cleaning and adjustable water pressure.

Hand operating the control knob of the bidet attachment to adjust water pressure and switch between cleansing modes.

Image 4.2: Easy control knob for precise water stream adjustment.

5. Priežiūra

Regular cleaning will ensure optimal performance and hygiene of your bidet attachment.

The bidet is made from durable ABS plastic, which is easy to clean. Use a mild, non-abrasive cleaner and a soft cloth to wipe down the exterior of the unit.
For nozzle cleaning, gently pull down the nozzles and clean them with a soft brush and mild soap. Rinse thoroughly.
Avoid using harsh chemicals or abrasive cleaning tools, as these can damage the bidet's finish and components.

6. Problemų sprendimas

If you encounter any issues with your BLAUX Cleanse Bidet Attachment, refer to the following common solutions:

Problema	Galima priežastis	Sprendimas
Vandens nutekėjimas	Loose connections, missing/damaged washers, incorrect T-adapter installation.	Ensure all connections are tight. Check for proper placement of rubber washers. Apply plumber's tape to threaded connections if necessary.
No Water Spray / Weak Spray	Water supply valve closed, clogged nozzles, low water pressure in household.	Verify the toilet's water supply valve is fully open. Clean the nozzles as described in the Maintenance section. Check household water pressure.
Nozzles Not Retracting	Debris or mineral buildup on nozzles.	Clean the nozzles thoroughly. Ensure no obstructions prevent their movement.

7. Specifikacijos

Prekinis ženklas: BLAUX
Modelio pavadinimas: BLAUX Cleanse Bidet Attachment
Modelio numeris: 30738
Medžiaga: Akrilnitrilo butadieno stirenas (ABS plastikas)
Spalva: Baltas
Montavimo tipas: Atsikišęs
Rankenėlių skaičius: 1 (Control Knob)
Ypatingos savybės: Adjustable Water Pressure, Dual Nozzles (Front & Rear Wash), DIY Installation
Prekės svoris: 1.34 svaro (0.61 kg)
Gaminio matmenys: 6.89 x 3.74 x 16.93 colio (17.5 x 9.5 x 43 cm)
Žarnos ilgis: 27.5 colių (70 cm)
Maitinimo šaltinis: Non-Electric (Water Pressure Operated)

8. Garantija ir palaikymas

The BLAUX Cleanse Bidet Attachment comes with a limited warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your product or contact BLAUX customer service directly.

For further assistance, please visit the official BLAUX websvetainėje arba susisiekite su klientų aptarnavimo komanda.

BLAUX 30738