Įvadas
This manual provides detailed instructions for the setup, operation, and maintenance of the HUNSN BM14 Fanless Mini PC. The BM14 is a compact, high-performance barebone system designed for various applications, from desktop computing to server tasks. As a barebone unit, it requires the installation of system memory (RAM), a storage drive (SSD/HDD), and an operating system to become fully functional.
Please read this manual thoroughly before proceeding with installation and operation to ensure proper use and to maximize the lifespan of your device.
Pakuotės turinys
Patikrinkite, ar jūsų pakuotėje yra visi toliau išvardyti daiktai:
- HUNSN BM14 Mini PC unit
- Maitinimo adapteris
- Maitinimo laidas
- Vertikalus stovas
- WiFi antennas (2 units)
- Garantinis talonas
If any items are missing or damaged, please contact your vendor or HUNSN customer support immediately.
Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelio numeris | BM14 |
| Medžiaga | Aliuminis |
| CPU | Intel Core i7 1165G7 / 1185G7 Processor (one supplied) |
| Atmintis (RAM) | 2 x SODIMM DDR4-3200 slots, Max. 64GB |
| Sandėliavimas | 1 x mSATA SSD, 1 x M.2 2280 NVME SSD, 1 x 2.5 Inch SATA SSD/HDD |
| Garso plokštė | ALC892 |
| Tinklo plokštė | Intel I219-V |
| Belaidis ryšys | WiFi 802.11ac (2.4/5Ghz), Bluetooth 4.0/4.2 |
| I/O prievadai | DP, HDMI, 4 x USB 3.0, 4 x USB 2.0, LAN, Spk (Speaker), Mic (Microphone) |
| Maitinimo įvestis | DC100-240V AC/50-60Hz, DC 12V7A |
| Darbinė temperatūra | 0°C ~ 70°C (32°F ~ 158°F) |
| Laikymo temperatūra | -20°C ~ 80°C (-4°F ~ 176°F) |
| Santykinė drėgmė | 10% ~ 90% nekondensuojantis |
| Matmenys | 225 x 185 x 45 mm |
| Svoris | 2.5 kg |
| TDP | 15W |
| Aušinimo sistema | Be ventiliatoriaus |
| Palaikoma OS | „Windows 10/11“, „Linux Ubuntu“. |
| Specialios funkcijos | Diskless boot, Restore AC Power Loss, Dual screen DP/HDMI (simultaneous/synchronous different display), HDMI 1.4 4K@60Hz, DP 1.2 4K@60Hz (DP to VGA transfer only) |
Sąrankos instrukcijos
The HUNSN BM14 is a barebone system. Follow these steps to install the necessary components and prepare your Mini PC for first use.
1. RAM (RAM) diegimas
- Išjungti: Ensure the Mini PC is disconnected from the power source.
- Atvira važiuoklė: Carefully open the chassis of the Mini PC. Refer to the product diagram for screw locations.
- Locate SODIMM Slots: Identify the two SODIMM DDR4-3200 memory slots on the motherboard.
- Įdėkite RAM: Align the notch on the RAM module with the notch in the slot. Insert the module at a 45-degree angle and push down firmly until the clips on both sides snap into place.
- Uždaryti važiuoklę: Securely close the chassis.
2. Installing Storage Drives
The BM14 supports mSATA SSD, M.2 2280 NVME SSD, and 2.5-inch SATA SSD/HDD.
- Power Off and Open Chassis: Ensure the Mini PC is powered off and the chassis is open.
- Install M.2 NVME SSD:
- Raskite M.2 2280 lizdą.
- Įstatykite M.2 SSD diską į lizdą kampu.
- Gently push down and secure it with the provided screw.
- Install mSATA SSD:
- Locate the mSATA slot.
- Insert the mSATA SSD into the slot.
- Pritvirtinkite jį pateiktais varžtais.
- Install 2.5-inch SATA SSD/HDD:
- Mount the 2.5-inch drive into the designated bay.
- Connect the SATA data and power cables to the drive and the motherboard.
- Uždaryti važiuoklę: Securely close the chassis after installation.
3. Išorinių įrenginių prijungimas
Connect your display, keyboard, mouse, and other devices.
- Ekranas: Connect your monitor to either the HDMI or DisplayPort (DP) output. For dual display, use both ports.
- USB įrenginiai: Plug in your keyboard, mouse, and other USB peripherals into the available USB 2.0 or USB 3.0 ports.
- Tinklas: For wired internet, connect an Ethernet cable to the LAN port. For wireless, attach the provided WiFi antennas to the connectors on the back panel.
- Garsas: Connect speakers or headphones to the "Spk" port and a microphone to the "Mic" port if needed.
- Galia: Connect the power adapter to the "DC IN" port on the Mini PC, then plug the power cord into an electrical outlet.
Image: Rear panel of the HUNSN BM14 Mini PC, illustrating the DP, HDMI, USB, LAN, and audio ports.
Image: Front panel of the HUNSN BM14 Mini PC, featuring USB ports and the power button.
4. Operacinės sistemos diegimas
After installing RAM and storage, you will need to install an operating system.
- Paruoškite diegimo laikmeną: Create a bootable USB drive with your preferred operating system (e.g., Windows 10/11, Linux Ubuntu).
- Paleidimas iš USB: Power on the Mini PC and repeatedly press the designated key (usually Del or F2) to enter the BIOS/UEFI settings. Configure the boot order to prioritize your USB installation media.
- Įdiegti operacinę sistemą: Follow the on-screen instructions to install the operating system onto your installed storage drive.
- Įdiegti tvarkykles: After OS installation, install any necessary drivers for optimal performance.
Naudojimo instrukcijos
Maitinimo įjungimas/išjungimas
- Maitinimas: Paspauskite priekiniame skydelyje esantį maitinimo mygtuką. Užsidegs maitinimo indikatoriaus lemputė.
- Išjungti:
- Standard Shutdown: Naudokite operacinės sistemos išjungimo funkciją.
- Priverstinis išjungimas: Press and hold the power button for 5-7 seconds until the device powers off. Use this only when the system is unresponsive.
- Restore AC Power Loss: The BM14 supports automatic power-on after a power failure. This feature can usually be configured in the BIOS/UEFI settings.
Ekrano konfigūracija
The Mini PC supports single or dual display setups using the HDMI and DisplayPort (DP) outputs.
- Vienas ekranas: Connect your monitor to either the HDMI or DP port.
- Dvigubas ekranas: Connect two monitors, one to the HDMI port and one to the DP port. The system supports simultaneous display or independent displays. Configure display settings within your operating system.
- DP to VGA: The DisplayPort supports direct conversion to VGA using an appropriate adapter. Note: DP to HDMI conversion is not supported.
- Rezoliucija: HDMI supports up to 4K (4096x2304) at 60Hz. DP supports up to 4K (7680x4320) at 60Hz.
Tinklo ryšys
- Laidinis LAN: Connect an Ethernet cable to the RJ45 LAN port for a stable wired network connection.
- Belaidis WiFi: Ensure antennas are attached and the WiFi module is enabled in the operating system. Configure your wireless network connection through your operating system's network settings. The device supports 802.11ac on both 2.4GHz and 5GHz bands.
- Bluetooth: The integrated Bluetooth 4.0/4.2 allows connection to compatible wireless devices such as keyboards, mice, and audio peripherals.
Priežiūra
The HUNSN BM14 Mini PC features a fanless design, which significantly reduces maintenance requirements and ensures silent operation.
- Valymas: Periodically clean the exterior of the Mini PC with a soft, dry cloth to remove dust. Avoid using liquid cleaners directly on the device. Ensure the cooling fins are free from obstructions to maintain optimal heat dissipation.
- Aplinka: Operate the Mini PC within the specified temperature and humidity ranges (0°C~70°C, 10%~90% non-condensing). Avoid placing the device in direct sunlight, near heat sources, or in excessively dusty or humid environments.
- Programinės įrangos atnaujinimai: Reguliariai atnaujinkite operacinę sistemą ir tvarkykles, kad užtikrintumėte sistemos stabilumą ir saugumą.
Trikčių šalinimas
If you encounter issues with your HUNSN BM14 Mini PC, refer to the following common troubleshooting steps:
- Nėra galios:
- Įsitikinkite, kad maitinimo adapteris yra tvirtai prijungtas prie „Mini PC“ ir veikiančio elektros lizdo.
- Verify the power cord is not damaged.
- Išbandykite lizdą su kitu įrenginiu.
- Nėra ekrano išvesties:
- Check that the monitor is powered on and the video cable (HDMI/DP) is securely connected to both the Mini PC and the monitor.
- Įsitikinkite, kad monitoriuje pasirinktas teisingas įvesties šaltinis.
- If using dual displays, try connecting only one monitor at a time to isolate the issue.
- Patikrinkite, ar RAM moduliai tinkamai įdėti.
- System Not Booting / OS Issues:
- Confirm that the storage drive (SSD/HDD) is properly installed and connected.
- Check BIOS/UEFI settings to ensure the boot order is correct and the storage drive is detected.
- If the operating system is corrupted, you may need to reinstall it.
- Nėra tinklo ryšio:
- For wired LAN, ensure the Ethernet cable is connected and the router/modem is working.
- For WiFi, ensure antennas are attached and the WiFi module is enabled in the operating system. Check network settings and password.
- Sistemos nestabilumas / gedimai:
- Ensure RAM and storage drives are compatible and correctly installed.
- Update all drivers and the operating system to the latest versions.
- Monitor system temperatures, although the fanless design minimizes overheating risks under normal loads.
If these steps do not resolve your issue, please consult the HUNSN support websvetainėje arba susisiekite su klientų aptarnavimo tarnyba.
Garantija ir palaikymas
Your HUNSN BM14 Mini PC comes with a warranty. Please refer to the included warranty card for detailed terms, conditions, and duration of coverage.
For technical support, driver downloads, or further assistance, please visit the official HUNSN website or contact their customer service department. Keep your product model number (BM14) and purchase information readily available when seeking support.