VECTOR SS6LV 1200 Peak Amp Ličio jonų užvedimo naudotojo vadovas

Produktas baigtasview

The VECTOR SS6LV is a compact and powerful 1200 peak amp lithium jump starter designed to instantly start cars and trucks with up to 8-cylinder engines. Beyond its primary function, it serves as a versatile portable power bank, featuring USB-A (2.1 Amps) and USB-C (3.1 Amps) ports for charging various electronic devices. It also includes an integrated LED work light for convenience in low-light conditions. The unit is equipped with a Smart Controller for safe operation, providing reverse polarity protection, and comes with heavy-duty powder-coated clamps.

Image: The VECTOR SS6LV jump starter with its attached heavy-duty clamps, šouasindėl savo kompaktiško dizaino.

Kas yra dėžutėje

Atidarę pakuotę rasite šiuos komponentus:

• VECTOR SS6LV Lithium Jump Starter Unit
• Smart Controller with Heavy Duty Powder Coated Clamps
• Kintamosios srovės įkrovimo adapteris
• DC (Car) Charging Adapter
• USB įkrovimo laidas

Image: All components included in the VECTOR SS6LV product box.

Produkto savybės

• Užvedimo starteris: Pateikia 1200 piko amps, capable of jump starting vehicles with up to 8-cylinder engines.
• USB įkroviklis: Equipped with USB-A (2.1 Amps) and USB-C (3.1 Amps) ports to charge and power various electronic devices such as phones, tablets, and laptops.
• Įkraunama ličio baterija: Internal lithium-ion battery can be recharged using the included AC, DC, or USB adapters.
• Saugus naudojimas: Features an Engine Start Smart Controller with reverse polarity protection, ensuring correct and safe connection of jumper cables.
• Nešiojamas dizainas: Compact and lightweight, making it easy to store and transport for on-the-go power needs.
• LED darbo lemputė: Integrated bright LED light provides illumination for nighttime or low-light situations.

Vaizdas: Išsamus view of the VECTOR SS6LV unit with key features labeled.

Sąranka

Pradinis įkrovimas

Before first use, fully charge the VECTOR SS6LV unit. It is recommended to fully charge the unit every 3 to 6 months to maintain optimal battery health, even if not in use.

1. Connect the USB Charging Cable to the unit's USB-C port.
2. Connect the other end of the USB Charging Cable to either the AC Charging Adapter (for wall outlet) or the DC Charging Adapter (for vehicle 12V accessory outlet).
3. Plug the chosen adapter into its respective power source. The battery indicator lights on the unit will illuminate to show charging progress.
4. Charging is complete when all indicator lights are solid blue.

Prisijungimas prie greito paleidimo

Prieš prijungdami užvedimo laidą, įsitikinkite, kad transporto priemonės uždegimas yra išjungtas.

1. Locate the battery terminals in your vehicle. The positive terminal is usually marked with a "+" sign and covered by a red cap. The negative terminal is marked with a "-" sign.
2. Prijunkite raudoną (teigiamą) jungtįamp of the Smart Controller to the positive (+) terminal of the vehicle's battery.
3. Prijunkite juodą (neigiamą) klamp of the Smart Controller to a clean, unpainted metal part of the vehicle's chassis or engine block, away from the battery and moving parts. Alternatively, connect to the negative (-) terminal of the battery if safe to do so.
4. Plug the Smart Controller cable into the "ENGINE START" port on the VECTOR SS6LV unit. The Smart Controller will indicate readiness (e.g., a solid green light).

Paveikslėlis: Prie automobilio akumuliatoriaus prijungtas ir paruoštas naudoti užvedimo įtaisas.

Veikiantis

Peršokti užvedant transporto priemonę

1. Ensure the VECTOR SS6LV unit is fully charged and properly connected to the vehicle's battery as described in the "Setup" section.
2. Once the Smart Controller indicates readiness (e.g., solid green light), attempt to start the vehicle's engine. Do not crank for more than 5 seconds.
3. If the vehicle does not start, wait at least 30 seconds before attempting again. Do not exceed three consecutive jump start attempts.
4. Once the vehicle starts, immediately disconnect the Smart Controller from the VECTOR SS6LV unit, then disconnect the black (negative) clamp, followed by the red (positive) clamp iš automobilio akumuliatoriaus.

Naudojimas kaip maitinimo bankas

The VECTOR SS6LV can charge various electronic devices.

• Connect your device's USB charging cable to either the USB-A (2.1 Amps) or USB-C (3.1 Amps) port on the side of the VECTOR SS6LV unit.
• Press the power button on the unit to begin charging. The indicator lights will show the remaining battery level.

Image: The jump starter unit actively charging a smartphone.

LED darbo žibinto naudojimas

The integrated LED work light provides illumination for various tasks.

• To turn on the LED work light, press and hold the power button for approximately 3 seconds.
• To cycle through light modes (solid, strobe, SOS), briefly press the power button.
• To turn off the LED work light, press and hold the power button again for approximately 3 seconds.

Image: The bright LED work light on the end of the unit.

Priežiūra

Įrenginio įkrovimas

To ensure the longevity and readiness of your VECTOR SS6LV, it is crucial to maintain its charge. Recharge the unit after each use, and at least every 3 to 6 months, even if it has not been used. This prevents deep discharge and prolongs battery life.

Sandėliavimas

Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it out of reach of children. Ensure the rubber covers for the ports are securely closed to protect against dust and moisture.

Trikčių šalinimas

Specifikacijos

• Prekinis ženklas: VEKTORIAUS
• Modelio numeris: SS6LV
• Gaminio matmenys: 3 "D x 1" P x 7" A
• Prekės svoris: 13.8 uncijos
• Amppakilimas: 1200 Amps
• Didžiausia išėjimo srovė: 1200 Amps
• Baterijos tipas: Ličio jonų (reikalingas 1, pridedamas)
• USB-A išėjimas: 2.1 Amps
• USB-C išvestis: 3.1 Amps
• Gamintojas: Baccus Global LLC
• Kilmės šalis: Kinija

Saugos informacija

ĮSPĖJIMAS: Šis gaminys gali paveikti jus su cheminėmis medžiagomis, įskaitant šviną ir švino junginius, kurie Kalifornijos valstijoje, kaip žinoma, gali sukelti vėžį ir apsigimimus arba kitą žalą reprodukcijai. Norėdami gauti daugiau informacijos, eikite į www.P65Warnings.ca.gov.

Always refer to the full user manual for complete safety instructions and warnings before operating this device.

Oficialus produkto vaizdo įrašas

Watch this official video from VECTOR to understand the key differences between battery chargers and jump starters, and how the VECTOR SS6LV functions.

Video: "VECTOR - Charger vs Jumper" - This video explains the distinction between battery chargers and jump starters, highlighting the immediate boost provided by a jump starter like the SS6LV.