Įvadas
This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech 5-Tier Metal Storage Rack, Model 592104. Please read these instructions carefully before assembly and use to ensure safe and proper operation.
Image 1: Fully assembled Yaheetech 5-Tier Metal Storage Rack, showcasing its five shelves and sturdy frame.
Saugos informacija
- Prieš surinkdami įsitikinkite, kad visi komponentai yra ir nepažeisti.
- Assemble the rack on a flat, stable surface.
- Do not exceed the maximum load capacity per shelf (175 kg / 385.8 lbs, evenly distributed).
- Tolygiai paskirstykite svorį lentynose, kad išlaikytumėte stabilumą.
- Surinkdami neleiskite vaikams ir naminiams gyvūnėliams.
- Surinkimo metu dėvėkite tinkamas apsaugos priemones, pavyzdžiui, pirštines, kad išvengtumėte sužalojimų.
Pakuotės turinys
Įsitikinkite, kad pakuotėje yra visos dalys:
- Steel uprights (vertical supports)
- Steel crossbeams (horizontal supports for shelves)
- MDF lentynų plokštės
- Plastic feet caps (16 pieces)
- Surinkimo instrukcijos (šis vadovas)
Sąranka ir surinkimas
The Yaheetech 5-Tier Metal Storage Rack features a screwless design for easy assembly. A rubber mallet (not included) may be helpful to secure connections.
Image 2: Close-up illustrating the screwless assembly mechanism, the MDF shelf board, and the embedded support structure for stability.
- Paruoškite plotą: Surinkimui paruoškite erdvią, plokščią ir stabilią vietą.
- Surinkite vertikalius rėmus: Connect the vertical steel uprights using the provided connectors. Ensure they are fully seated. The rack can be assembled as a single tall unit or divided into two shorter units.
- Attach Crossbeams: Insert the horizontal crossbeams into the slots on the uprights. Use a rubber mallet to gently tap them into place until they are secure. Ensure all four crossbeams for a single shelf level are installed before placing the MDF board.
- Lentynos aukščio reguliavimas: The shelf height is adjustable. Determine your desired shelf positions before inserting all crossbeams.
Image 3: Illustration demonstrating the adjustable height feature of the shelves, allowing customization for various item sizes.
- Place MDF Boards: Once the crossbeams for a shelf level are securely in place, lay the MDF board onto the crossbeams. Ensure it sits flush and is supported by the central support ribs.
- Install Feet Caps: Attach the plastic feet caps to the bottom of the uprights to protect your floor and enhance stability.
The rack can be configured as a single 5-tier unit or split into two separate units (e.g., a 3-tier and a 2-tier unit) for versatile use.
Naudojimas ir naudojimas
This storage rack is designed for various applications, including kitchens, storage rooms, workshops, garages, basements, bedrooms, and living rooms.
4 pav.: pvz.amples of the Yaheetech storage rack used in different environments, including an office, living room, kitchen, and garage, highlighting its versatility.
- Apkrova: Each shelf can hold up to 175 kg (385.8 lbs) when the weight is evenly distributed. Do not concentrate heavy items in one small area.
- Reguliuojamos lentynos: Adjust shelf heights as needed to accommodate items of different sizes. To adjust, remove the MDF board, gently tap out the crossbeams, reposition them, and re-insert the MDF board.
- Universali konfigūracija: The rack can be used as a tall shelving unit or separated into two shorter units, or even laid flat as a workbench, depending on your storage needs.
Priežiūra
- Valymas: Wipe down the steel frame and MDF boards with a damp cloth. Avoid abrasive cleaners that could damage the painted finish.
- Patikra: Periodically check all connections to ensure they remain secure. Re-tap any loose crossbeams with a rubber mallet if necessary.
- Rust and Scratch Resistance: The rack features a rust and scratch-resistant coating. However, avoid sharp objects or harsh chemicals that could compromise this protection.
- Grindų apsauga: The vinyl feet caps protect your floors from scratches. Ensure they are always in place.
Trikčių šalinimas
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Stovas jaučiasi nestabilus arba nestabilus. | Connections not fully seated; uneven floor; weight not evenly distributed. | Ensure all crossbeams are fully tapped into the uprights. Move the rack to a level surface or use shims if necessary. Redistribute items evenly across shelves. |
| MDF shelf board does not sit flush. | Crossbeams not properly installed or bent. | Verify that all crossbeams are correctly inserted and fully seated. Check for any bent components and contact support if parts are damaged. |
| Sunkumai surinkiant komponentus. | Components not aligned correctly; lack of force. | Ensure parts are aligned before tapping. Use a rubber mallet to gently but firmly tap components into place. Do not force if alignment is incorrect. |
Specifikacijos
Image 5: Visual representation of the rack's dimensions (90cm width, 30cm depth, 180cm height) and the maximum load capacity per shelf (175 kg).
- Modelis: 592104
- Medžiaga: Alloy Steel, Stainless Steel, Metal (Frame), MDF (Shelves)
- Spalva: Juoda
- Matmenys (surinkto): 90 cm pločio x 30 cm gylio x 180 cm aukščio (35.43 colių pločio x 11.81 colių gylio x 70.87 colių aukščio)
- Pakopų skaičius: 5
- Lentynos keliamoji galia: 175 kg (385.8 lbs) (evenly distributed)
- Savybės: Adjustable shelf height, corrosion resistant, lightweight, durable, screwless assembly, non-slip feet.
- Reikalingas surinkimas: Taip
- Prekės svoris: 27.9 svaro
- UPC: 850035103746
Garantija ir palaikymas
For warranty information, technical support, or to inquire about replacement parts, please contact Yaheetech customer service directly. Refer to your purchase documentation for specific contact details.
You can also visit the official Yaheetech store on Amazon for more information: „Yaheetech“ parduotuvė