„Spinnaker Fleuss SP-5055“ automatinio nardymo laikrodžio naudotojo vadovas

Įvadas

Thank you for choosing the Spinnaker Fleuss SP-5055 Automatic Dive Watch. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read it carefully to ensure optimal performance and longevity of your watch.

Image: Spinnaker Fleuss SP-5055 automatic dive watch with oxblood red dial and black leather strap on a wrist.

Sąranka

1. Pradinis apvijimas

Your Spinnaker Fleuss watch is powered by an automatic Miyota 8215 movement. Before wearing for the first time, or if the watch has stopped, it needs to be manually wound. To do this:

1. Unscrew the crown counter-clockwise until it pops out to position 1.
2. Turn the crown clockwise approximately 20-30 times. This will initiate power reserve.
3. Įspauskite karūnėlę atgal ir prisukite ją pagal laikrodžio rodyklę, kad užtikrintumėte atsparumą vandeniui.

The watch will then continue to wind itself through the motion of your wrist while worn.

2. Laiko ir datos nustatymas

Norėdami nustatyti laiką ir datą laikrodyje:

1. Unscrew the crown counter-clockwise until it pops out to position 1.
2. Pull the crown out to position 2 (first click) to set the date. Turn the crown clockwise or counter-clockwise until the correct date is displayed.
3. Pull the crown out further to position 3 (second click) to set the time. Turn the crown to move the hands clockwise until the correct time is displayed. Ensure to account for AM/PM when setting the date.
4. Once time and date are set, push the crown back into position 1 and screw it down clockwise firmly to maintain water resistance.

Vaizdas: Šoninė view of the Spinnaker Fleuss SP-5055 watch, highlighting the stainless steel case and crown.

Laikrodžio valdymas

1. Automatinis judėjimas

The Miyota 8215 movement is an automatic mechanical movement. It is powered by the natural motion of your wrist. When fully wound, it has a power reserve of approximately 42 hours. If the watch is not worn for an extended period, it may stop and require manual winding as described in the Setup section.

2. Unidirectional Rotating Bezel

The Spinnaker Fleuss features a unidirectional rotating bezel, designed for dive timing. To use it:

1. Align the bezel's zero marker with the minute hand at the start of your dive or timed event.
2. The bezel rotates only counter-clockwise, preventing accidental increases in elapsed time.
3. Read the elapsed time by noting the position of the minute hand against the bezel's scale.

3. Atsparumas vandeniui

This watch is water resistant to 150 meters (15 ATM). This rating makes it suitable for swimming, snorkeling, and recreational diving. Always ensure the crown is fully screwed down before exposing the watch to water. Do not operate the crown while the watch is submerged or wet.

Image: Spinnaker Fleuss SP-5055 watch dial glowing in the dark, showcasing the luminous hands and hour markers.

Priežiūra

1. Valymas

Norėdami išlaikyti laikrodžio išvaizdą:

• Reguliariai valykite korpusą ir kristalą minkštu, sausu skudurėliu.
• Nerūdijančio plieno detalėms šiek tiek damp galima naudoti šluostę, po to – sausą šluostę.
• Venkite naudoti stiprias chemines medžiagas ar abrazyvines medžiagas, nes jos gali pažeisti laikrodžio apdailą.

2. Odinio dirželio priežiūra

Odinis dirželis yra jautrus drėgmės, prakaito ir tiesioginių saulės spindulių poveikiui. Norėdami pailginti jo tarnavimo laiką:

• Avoid prolonged exposure to water. If it gets wet, dry it gently with a soft cloth and allow it to air dry completely.
• Venkite tiesioginių saulės spindulių ir ekstremalių temperatūrų.
• Clean with a specialized leather cleaner if necessary, following product instructions.

3. Professional Service

For optimal performance, it is recommended to have your automatic watch serviced by a qualified watchmaker every 3-5 years. This includes checking the movement, seals, and water resistance.

Trikčių šalinimas

• Laikrodis neveikia: If the watch has stopped, manually wind it by turning the crown clockwise 20-30 times after unscrewing it to position 1. Ensure it is worn regularly to keep the automatic movement powered.
• Netikslus laikas: Automatic movements can vary slightly in accuracy. If your watch is consistently gaining or losing significant time, it may require regulation by a professional watchmaker.
• Data nesikeičia: Ensure the time is set correctly, accounting for AM/PM. The date typically changes around midnight. If the date changes at noon, advance the time by 12 hours.
• Vandens nutekėjimas: If you suspect water has entered the watch, immediately take it to a professional watchmaker for inspection and repair to prevent further damage. Always ensure the crown is fully screwed down before water exposure.

Specifikacijos

Image: Close-up of the Spinnaker Fleuss SP-5055 watch case back, showing the automatic movement and engraved specifications.

Oficialūs produktų vaizdo įrašai

Garantija ir palaikymas

Informacija apie garantiją

Your Spinnaker Fleuss watch comes with a manufacturer's warranty covering defects in materials and workmanship under normal use. The specific terms and duration of the warranty are typically included with your purchase documentation. Please refer to the warranty card or contact Spinnaker customer support for detailed information.

Pagalba klientams

For any questions, service requests, or support needs regarding your Spinnaker Fleuss watch, please visit the official Spinnaker website or contact their customer service department. Contact details can usually be found on the brand's webvietoje arba pakavimo medžiagose.