1. Įvadas
Thank you for choosing the Yaheetech Metal Bed Frame. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image 1.1: Fully assembled Yaheetech Metal Bed Frame.
2. Saugos informacija
To ensure safe use of this product, please observe the following warnings:
- Svorio limitas: Neviršykite maksimalaus svorio, 136 kg (300 svaro). Overloading may cause structural failure and injury.
- Tinkamas surinkimas: Ensure the bed frame is correctly and securely assembled according to the instructions to prevent instability or tipping.
- Suspaudimo taškai: Be cautious of potential pinch points and sharp edges during assembly and use. Keep hands clear of moving parts.
- Vaikai: Smulkias dalis ir pakavimo medžiagas laikykite vaikams nepasiekiamoje vietoje, kad išvengtumėte užspringimo pavojaus.
- Reguliarūs patikrinimai: Periodiškai patikrinkite visus varžtus ir jungtis, kad jie būtų tvirtai priveržti. Prireikus priveržkite.
- Lygis paviršius: Always place the bed frame on a flat, level surface to ensure stability.
3. Pakuotės turinys
Prieš surinkdami patikrinkite, ar yra visi komponentai ir ar jie nepažeisti. Jei trūksta kokių nors dalių arba jos pažeistos, susisiekite su klientų aptarnavimo tarnyba.
(A detailed parts list is typically included with the physical product. Please refer to the diagram and list provided in your product packaging.)
4. Surinkimo instrukcijos
Follow these steps carefully to assemble your Yaheetech Metal Bed Frame. It is recommended to have two people for assembly.
- Išpakuokite ir atpažinkite dalis: Carefully unpack all components and lay them out on a clean, soft surface (e.g., a carpet) to prevent scratches. Identify each part using the provided parts list.
- Surinkite lovos galvūgalį ir kojūgalį: Connect the vertical and horizontal bars of the headboard and footboard sections. Ensure all connections are secure but do not fully tighten bolts until the entire frame is assembled.
- Šoninių turėklų pritvirtinimas: Connect the side rails to the assembled headboard and footboard sections. Align the holes and insert bolts, hand-tightening them for now.
- Atraminių kojų montavimas: Attach any central support legs to the main frame as indicated in your specific product diagram.
- Įterpti lenteles: Place the metal slats into the designated slots or hooks on the side rails. Ensure each slat is properly seated and secured. Some slats may require aiming the iron pipe at a notch and pressing firmly to fix into place.
- Galutinis priveržimas: Once all components are in place and aligned, systematically tighten all bolts and screws using the provided tool. Do not overtighten.
- Patikrinkite stabilumą: Švelniai pakratykite surinktą lovos rėmą, kad įsitikintumėte, jog jis stabilus ir visos jungtys tvirtos.
Image 4.1: Aiming the iron pipe at the notch during slat installation.
Image 4.2: Pressing firmly to secure the slat.
Image 4.3: Built-in slats designed to prevent mattress sliding.
5. Naudojimo instrukcijos
Your Yaheetech Metal Bed Frame is designed for use with a 90x190cm mattress. Simply place your mattress directly onto the assembled metal slat base. The robust metal construction and integrated slats provide stable support for your mattress, promoting good air circulation.
The bed frame features a high headboard, allowing for comfortable back support when reading or watching television in bed. The 32 cm clearance between the floor and the bed base provides ample under-bed storage space for boxes, luggage, or other items.
Image 5.1: Illustration of the 32 cm under-bed storage space.
6. Priežiūra
To maintain the longevity and appearance of your bed frame, follow these simple maintenance guidelines:
- Valymas: Metalinį rėmą nuvalykite minkšta,amp šluoste. Venkite naudoti stiprias chemines medžiagas ar abrazyvinius valiklius, nes jie gali pažeisti milteliniu būdu dažytą paviršių.
- Reguliarus patikrinimas: Periodically inspect all bolts, screws, and connections to ensure they are tight. Retighten any loose fasteners to maintain stability.
- Venkite drėgmės: Keep the bed frame in a dry environment to prevent rust.
- Protective Pads: The frame is equipped with protective pads on the legs. Ensure these are intact to prevent scratching floors.
Image 6.1: Key features including protective pads and metal tube construction.
7. Problemų sprendimas
Jei kyla problemų dėl lovos rėmo, žr. šias dažniausiai pasitaikančias problemas ir sprendimus:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Lovos rėmas nestabilus arba nestabilus. | Atsilaisvinę varžtai arba nelygios grindys. | Ensure all bolts are securely tightened. Move the bed to a level surface or use shims under legs if necessary. |
| Cypimo garsai. | Atsilaisvinusios jungtys arba trintis tarp metalinių dalių. | Priveržkite visus varžtus. Jei girgždėjimas nepraeina, ant jungties taškų užtepkite nedidelį kiekį tepalo (pvz., silikoninio purškalo). |
| Čiužinys slysta ant rėmo. | Mattress not properly seated or lack of friction. | Ensure the mattress is centered on the slats. The built-in slats are designed to minimize sliding; if issues persist, consider a non-slip mat between the mattress and slats. |
8. Specifikacijos
Detailed specifications for the Yaheetech Metal Bed Frame (Model: 613687):
| Funkcija | Detalė |
|---|---|
| Prekės ženklas | Yaheetech |
| Modelio numeris | 613687 |
| Spalva | Juoda |
| Medžiaga | Metalas |
| Apdailos tipas | Miltelinis dažymas |
| Bendri matmenys (I x P x A) | 198.5 x 96.5 x 82.5 cm (78.1 x 38 x 32.5 colio) |
| Suderinamas čiužinio dydis | 90 x 190 cm (viengulė) |
| Po lova išvalymas | 32 cm (12.6 coliai) |
| Prekės svoris | 12 kg (26.5 svaro) |
| Maksimali svorio talpa | 136 kg (300 svaro) |
| Ypatingos savybės | Squeak-resistant, Light-resistant |
| Sudedamosios dalys | Headboard, Footboard, Side Rails, Slats, Support Legs |
8.1 pav.: Lovos rėmo matmenų schema.
9. Garantija ir palaikymas
For warranty information or if you require assistance with your Yaheetech Metal Bed Frame, please contact Yaheetech customer service through your purchase platform or the official Yaheetech websvetainę. Kreipdamiesi į palaikymo tarnybą, turėkite po ranka savo modelio numerį (613687) ir pirkimo informaciją.