1. Įvadas
This manual provides essential information for the safe and efficient use of your Phanteks Revolt SFX 750W 80 PLUS Platinum power supply. This power supply is designed for small form-factor (SFX) chassis, offering high efficiency and a fully modular design for optimized cable management and system stability.
Image 1: Phanteks Revolt SFX 750W 80 PLUS Platinum Power Supply. This image shows the compact black power supply unit with its fan grille visible.
2. Saugos informacija
WARNING: Improper installation or use can result in serious injury or damage to your system components. Always follow these safety guidelines:
- Prieš montuodami ar atlikdami techninę priežiūrą, įsitikinkite, kad maitinimo šaltinis yra atjungtas nuo kintamosios srovės maitinimo lizdo.
- Neatidarykite maitinimo bloko. Didelis garsas.tagyra viduje, net ir atjungus.
- Maitinimo šaltinį įrenkite gerai vėdinamoje vietoje. Neužblokuokite ventiliatoriaus ar ventiliacijos angų.
- Use only the modular cables provided with this power supply. Using incompatible cables can cause damage.
- Užtikrinkite tinkamą kompiuterinės sistemos įžeminimą.
- Saugokite maitinimo šaltinį nuo drėgmės ar ekstremalių temperatūrų.
3. Pakuotės turinys
Patikrinkite, ar pakuotėje yra visi komponentai:
- Phanteks Revolt SFX 750W 80 PLUS Platinum Power Supply Unit
- Kintamosios srovės maitinimo laidas
- Modular Cable Set, including:
- 1x 24-pin ATX Motherboard Cable (18+10pin to 24pin)
- 4x 8-pin CPU/PCI-E Cables (8pin to CPU 8pin / PCI-E 8pin)
- 3x 6-pin SATA/Molex Cables (6pin to SATA/Molex)
- Tvirtinimo varžtai
- Vartotojo vadovas (šis dokumentas)
Note: The modular cables are flat ribbon cables designed for flexibility and ease of routing in compact chassis.
4. Sąranka ir diegimas
Follow these steps to install your Phanteks Revolt SFX power supply:
- Prepare Your Chassis: Ensure your computer chassis supports the SFX form factor. Remove any existing power supply.
- Maitinimo šaltinio montavimas: Carefully slide the Phanteks Revolt SFX PSU into the designated SFX power supply bay in your chassis. Secure it using the provided mounting screws.
- Prijunkite modulinius kabelius:
- 24 kontaktų ATX pagrindinės plokštės kabelis: Connect the 18+10pin end to the power supply and the 24-pin end to your motherboard.
- CPU Power Cables: Connect the 8-pin end(s) to the power supply and the 4+4pin or 8-pin end(s) to your motherboard's CPU power connector(s).
- PCI-E Power Cables: Connect the 8-pin end(s) to the power supply and the 6+2pin or 8-pin end(s) to your graphics card(s).
- SATA/Molex Cables: Connect the 6-pin end(s) to the power supply and the SATA or Molex connectors to your storage drives and other peripherals.
Ensure all cable connections are firm and properly seated. Utilize the flexibility of the flat ribbon cables for optimal routing and airflow within your chassis.
- Prijunkite kintamosios srovės maitinimą: Once all internal connections are made, connect the AC power cord to the power supply's AC inlet and then to a wall outlet or surge protector.
- Maitinimas: Flip the power switch on the back of the PSU to the 'ON' position. You can now power on your computer system.
5. Naudojimo instrukcijos
The Phanteks Revolt SFX 750W power supply is designed for reliable and efficient operation.
- 80 PLUS Platinum efektyvumas: This power supply is certified 80 PLUS Platinum, ensuring high energy efficiency (up to 92% at 50% system load). This reduces heat generation and operating costs.
- Silent Fan Operation: The integrated 92mm Fluid Dynamic Bearing (FDB) fan features intelligent thermal control. It operates silently and optimizes cooling performance based on load.
- 0 RPM Mode: For ultimate silence, the fan will remain off when the system load is below 30%. This is normal operation. The fan will automatically activate as the load increases.
- Apsaugos savybės: The PSU includes multiple protection circuits to safeguard your components:
- OPP (Overpower Protection)
- OVP (Virš ttage apsauga)
- UVP (Pagal ttage apsauga)
- SCP (Apsauga nuo trumpojo jungimo)
- OCP (Apsauga nuo perteklinės srovės)
- OTP (Apsauga nuo perkaitimo)
- No-Load Protection
- Iš naujo nustatyti apsaugą
6. Priežiūra
To ensure optimal performance and longevity of your power supply, consider the following maintenance tips:
- Dulkių šalinimas: Periodically clean dust from the power supply's fan grille and ventilation openings using compressed air. Ensure the PSU is powered off and disconnected from AC power before cleaning.
- Aplinkos sąlygos: Operate the power supply within the specified temperature and humidity ranges (Operating Temp: 0 to 50°C; Operating Humidity: Up to 85% relative humidity, non-condensing).
- Kabelių valdymas: Ensure cables are routed neatly to prevent obstruction of airflow within the chassis.
7. Problemų sprendimas
Jei kyla problemų dėl maitinimo šaltinio, vadovaukitės toliau pateiktais įprastais trikčių šalinimo veiksmais.
- Nėra galios:
- Patikrinkite, ar kintamosios srovės maitinimo laidas yra tvirtai prijungtas prie maitinimo bloko ir sieninio lizdo.
- Įsitikinkite, kad maitinimo jungiklis, esantis maitinimo bloko gale, yra padėtyje „Įjungta“.
- Patikrinkite, ar sieninis lizdas veikia, išbandydami jį su kitu įrenginiu.
- Confirm all modular cables (especially the 24-pin motherboard cable) are firmly seated at both the PSU and component ends.
- Sistemos nestabilumas / gedimai:
- Įsitikinkite, kad jūsų sistemos energijos poreikiai neviršija maitinimo šaltinio 750 W galios.
- Check for loose cable connections, particularly to the motherboard, CPU, and graphics card.
- Verify that the PSU's ventilation is not obstructed, leading to overheating. The built-in OTP (Over Temperature Protection) may shut down the unit if it overheats.
- Ventiliatorius nesisuka:
- The PSU features a 0 RPM mode. The fan will not spin if the system load is below 30%. This is normal operation.
- If the system is under significant load and the fan is still not spinning, ensure there are no obstructions to the fan blades.
If problems persist after following these steps, contact Phanteks customer support for further assistance.
8. Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Modelio pavadinimas | Revolt SFX 750W Platinum |
| Modelio numeris | PH-P750PSF |
| Formos faktorius | SFX |
| Išėjimo vattage | 750W |
| Efektyvumo sertifikavimas | 80 PLIUS Platina |
| Aušinimo būdas | Oras (92 mm skysčio dinaminio guolio ventiliatorius) |
| Ventiliatoriaus ypatybės | Intelligent Thermal Control, 0 RPM mode below 30% load |
| Maitinimo bloko dizainas | Visiškai modulinė |
| AC įvestis | 100-240Vac, 10A-5A, 50-60Hz |
| Darbinė temperatūra | nuo 0 iki 50°C |
| Darbinė drėgmė | Santykinė oro drėgmė iki 85% (nekondensuojanti) |
| MTBF | >100,000 hours at 25°C (excluding DC Fan) |
| Išėjimo apsauga | OPP, OVP, UVP, SCP, OCP, OTP, No-Load, Reset Protection |
| Main Output Connectors | 1x 24-pin MB, 4x 8-pin CPU/PCI-E, 3x 6-pin SATA/Molex |
9. Garantija ir palaikymas
Garantija: This Phanteks Revolt SFX 750W 80 PLUS Platinum power supply is covered by a 1 metų gamintojo garantija nuo pirkimo datos. Prašome išsaugoti pirkimo įrodymą garantiniams reikalavimams.
The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, accident, abuse, misuse, natural disaster, or unauthorized modification.
Klientų aptarnavimas: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please visit the official Phanteks websvetainėje arba susisiekite tiesiogiai su jų klientų aptarnavimo tarnyba.
„Phanteks“ oficialus Websvetainė: www.phanteks.com
