AsperX AX2500 Car Jump Starter User Manual

Įvadas

Thank you for choosing the AsperX AX2500 Car Jump Starter. This device is designed to provide a reliable and safe solution for starting 12V vehicles with dead batteries, and also serves as a portable power bank and LED flashlight. Please read this manual thoroughly before use to ensure proper operation and safety.

Svarbi saugos informacija

Visada laikykitės šių saugos priemonių, kad išvengtumėte sužalojimų ar įrenginio ar transporto priemonės sugadinimo:

• Nebandykite užvesti transporto priemonės, jei užvedimo laidas ar laidai yra pažeisti.
• Ensure proper polarity when connecting the jumper cables to the vehicle battery. Incorrect connection can cause sparks and damage.
• Neleisti raudonos ir juodos spalvos klampprijungus prie užvedimo laidininko, jie turi liestis vienas su kitu.
• Laikykite užvedimo jungiklį vaikams nepasiekiamoje vietoje.
• Do not expose the jump starter to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F) or direct sunlight for extended periods.
• Do not disassemble, modify, or attempt to repair the jump starter.
• Use only the provided smart jumper cables and charging accessories.
• Remove the jump starter from the vehicle battery within 30 seconds after the vehicle starts.

Vaizdas: vidinis view of the AsperX AX2500 jump starter highlighting its intelligent protection features, including zero spark and zero damage design, and operating temperature range of -4°F to 140°F.

Pakuotės turinys

Patikrinkite, ar pakuotėje yra visi reikalingi daiktai:

• AsperX AX2500 Portable Car Jump Starter
• Smart Jumper Cable with Clamps
• C tipo USB įkrovimo laidas
• Sandėliavimo dėklas
• Cigarečių degiklio adapteris
• Vartotojo vadovas

Image: All items included in the AsperX AX2500 jump starter package.

Produktas baigtasview

Familiarize yourself with the components of your AsperX AX2500 jump starter:

Image: Detailed diagram of the AsperX AX2500 jump starter with numbered labels for each component.

1. 12V Jumper Cable Port
2. USB-C Quick Charge Input/Output (PD 18W)
3. USB Quick Charge Output (USB-A)
4. LED žibintuvėlis
5. 12V 10A DC Output
6. Maitinimo mygtukas
7. Maitinimo indikatoriai
8. Warning Light Switch
9. Įspėjamoji lemputė

Sąranka ir įkrovimas

„Jump Starter“ įkrovimas

Before first use, fully charge the AsperX AX2500. It is recommended to recharge the unit every 3-6 months to maintain battery health, even if not used.

1. Connect the provided USB Type-C charging cable to the USB-C Quick Charge Input/Output port (2) on the jump starter.
2. Connect the other end of the USB Type-C cable to a compatible USB wall adapter (not included) or car charger.
3. The Power Indicator Lights (7) will illuminate and flash during charging. All four lights will be solid when fully charged.

The 21000mAh capacity ensures multiple uses and can charge other devices quickly.

Image: The AsperX AX2500 jump starter displaying its various output ports and highlighting its 21000mAh capacity.

Naudojimo instrukcijos

Peršokti užvedant transporto priemonę

The AsperX AX2500 is designed to jump start 12V vehicles with up to 10L gas or 7.3L diesel engines. Ensure the jump starter is at least 75% charged (3 indicator lights) before attempting a jump start.

1. Paruoškite transporto priemonę: Turn off the vehicle's ignition and all accessories (headlights, radio, air conditioning). Engage the parking brake.
2. Connect Jumper Cables to Jump Starter: Insert the blue plug of the smart jumper cable into the 12V Jumper Cable Port (1) on the jump starter. Ensure a firm connection. The indicator light on the smart cable should flash.
3. Prijunkite Clamps to Vehicle Battery:
   • Pritvirtinkite raudona (+) klamp prie automobilio akumuliatoriaus teigiamo (+) poliaus.
   • Pritvirtinkite juoda (-) klamp to the vehicle's negative (-) battery terminal or a solid, unpainted metal part of the vehicle's chassis away from the battery.

   The smart cable will perform a self-check. If the indicator light on the smart cable turns solid green, it's safe to proceed. If it shows a red light or beeps, check connections for correct polarity or if the battery is too low/damaged.

4. Užvesti transporto priemonę: Once the smart cable indicator is solid green, start your vehicle's engine.
5. Remove Jumper Cables: As soon as the vehicle starts, immediately remove the black (-) clamp from the vehicle, then the red (+) clamp. Disconnect the smart cable from the jump starter.

Image: The AsperX AX2500 jump starter connected to a vehicle battery using the smart jumper cables, ready for operation. This image also illustrates the wide range of vehicles it can start, including trucks, SUVs, motorcycles, and lawnmowers.

Naudojimas kaip maitinimo bankas

The AsperX AX2500 can charge various electronic devices via its USB-C PD 18W port (2) and USB Quick Charge Output (3).

1. Connect your device's charging cable to the appropriate USB port on the jump starter.
2. Press the Power Button (6) to begin charging. The power indicator lights will show the remaining battery level.

Image: The AsperX AX2500 jump starter being used to charge a smartphone and a tablet simultaneously, demonstrating its power bank functionality.

Using the 12V DC Output

The 12V 10A DC Output (5) can power 12V accessories like car air pumps or vacuum cleaners using the included cigarette lighter adapter.

1. Connect the cigarette lighter adapter to the 12V 10A DC Output port (5).
2. Plug your 12V accessory into the cigarette lighter adapter.
3. Press the Power Button (6) to activate the output.

Image: The AsperX AX2500 jump starter connected to and powering a tire inflator through its 12V 10A DC output port.

LED žibintuvėlio naudojimas

The integrated LED Flashlight (4) has four modes: Normal, Strobe, SOS, and Red Warning Light.

1. Press and hold the Power Button (6) for 3 seconds to turn on the flashlight in Normal mode.
2. Press the Power Button (6) briefly to cycle through Strobe, SOS, and Red Warning Light modes.
3. Press and hold the Power Button (6) again for 3 seconds to turn off the flashlight.

Image: The AsperX AX2500 jump starter's LED flashlight in operation, illustrating its various lighting modes for different emergency and utility scenarios.

Priežiūra

• Saugykla: Laikykite užvedimo laidą vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių ir drėgmės.
• Įkrovimas: Recharge the unit every 3-6 months to maintain optimal battery performance, even if it has not been used.
• Valymas: Nuvalykite įrenginį minkštu, sausu skudurėliu. Nenaudokite stiprių cheminių medžiagų ar abrazyvinių valiklių.
• Akumuliatoriaus priežiūra: Neperkraukite ir visiškai neiškraukite akumuliatoriaus.

Trikčių šalinimas

Specifikacijos

Garantija ir palaikymas

The AsperX AX2500 Car Jump Starter comes with a 2-year technical support warranty.

If you encounter any issues or have questions regarding your product, please contact AsperX customer support. Refer to the contact information provided in your original purchase documentation or on the official AsperX websvetainę.